diff mbox series

[v2,3/3] staging: wilc1000: updated DT binding documentation

Message ID 20200307085523.7320-4-ajay.kathat@microchip.com (mailing list archive)
State Not Applicable
Delegated to: Johannes Berg
Headers show
Series staging: wilc1000: handle DT binding documentation comments | expand

Commit Message

Ajay Singh March 7, 2020, 8:55 a.m. UTC
From: Ajay Singh <ajay.kathat@microchip.com>

Merged the DT binding documentation of SDIO and SPI into a single file.
Removed documentation for some of the properties which are not required
and handled review comments received in [1] & [2].

[1]. https://lore.kernel.org/linux-wireless/20200303020230.GA15543@bogus
[2]. https://lore.kernel.org/linux-wireless/20200303015558.GA6876@bogus

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
 .../wilc1000/microchip,wilc1000,sdio.yaml     | 68 ------------------
 .../wilc1000/microchip,wilc1000,spi.yaml      | 61 ----------------
 .../staging/wilc1000/microchip,wilc1000.yaml  | 72 +++++++++++++++++++
 3 files changed, 72 insertions(+), 129 deletions(-)
 delete mode 100644 drivers/staging/wilc1000/microchip,wilc1000,sdio.yaml
 delete mode 100644 drivers/staging/wilc1000/microchip,wilc1000,spi.yaml
 create mode 100644 drivers/staging/wilc1000/microchip,wilc1000.yaml
diff mbox series

Patch

diff --git a/drivers/staging/wilc1000/microchip,wilc1000,sdio.yaml b/drivers/staging/wilc1000/microchip,wilc1000,sdio.yaml
deleted file mode 100644
index b338f569f7e2..000000000000
--- a/drivers/staging/wilc1000/microchip,wilc1000,sdio.yaml
+++ /dev/null
@@ -1,68 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000,sdio.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Microchip WILC wireless SDIO devicetree bindings
-
-maintainers:
-  - Adham Abozaeid <adham.abozaeid@microchip.com>
-  - Ajay Singh <ajay.kathat@microchip.com>
-
-description:
-  The wilc1000 chips can be connected via SDIO. The node is used to
-  specify child node to the SDIO controller that connects the device
-  to the system.
-
-properties:
-  compatible:
-    const: microchip,wilc1000-sdio
-
-  irq-gpios:
-    description: The GPIO phandle connect to a host IRQ.
-    maxItems: 1
-
-  reg:
-    description: Slot ID used in the controller.
-    maxItems: 1
-
-  clocks:
-    description: phandle to the clock connected on rtc clock line.
-    maxItems: 1
-
-  bus-width:
-    description: The number of data lines wired up the slot.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 4, 8]
-      - default: 1
-
-required:
-  - compatible
-  - irq-gpios
-  - reg
-
-examples:
-  - |
-    mmc1: mmc@fc000000 {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      pinctrl-names = "default";
-      pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
-      non-removable;
-      vmmc-supply = <&vcc_mmc1_reg>;
-      vqmmc-supply = <&vcc_3v3_reg>;
-      status = "okay";
-      wilc_sdio@0 {
-        compatible = "microchip,wilc1000-sdio";
-          irq-gpios = <&pioC 27 0>;
-          reg = <0>;
-          clocks = <&pck1>;
-          clock-names = "rtc_clk";
-          assigned-clocks = <&pck1>;
-          assigned-clock-rates = <32768>;
-          status = "okay";
-          bus-width = <4>;
-        };
-    };
diff --git a/drivers/staging/wilc1000/microchip,wilc1000,spi.yaml b/drivers/staging/wilc1000/microchip,wilc1000,spi.yaml
deleted file mode 100644
index cc8ed64ce627..000000000000
--- a/drivers/staging/wilc1000/microchip,wilc1000,spi.yaml
+++ /dev/null
@@ -1,61 +0,0 @@ 
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000,spi.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Microchip WILC wireless SPI devicetree bindings
-
-maintainers:
-  - Adham Abozaeid <adham.abozaeid@microchip.com>
-  - Ajay Singh <ajay.kathat@microchip.com>
-
-description:
-  The wilc1000 chips can be connected via SPI. This document describes
-  the binding for the SPI connected module.
-
-properties:
-  compatible:
-    const: microchip,wilc1000-spi
-
-  spi-max-frequency:
-    description: Maximum SPI clocking speed of device in Hz.
-    maxItems: 1
-
-  reg:
-    description: Chip select address of device.
-    maxItems: 1
-
-  irq-gpios:
-    description: The GPIO phandle connect to a host IRQ.
-    maxItems: 1
-
-  clocks:
-    description: phandle to the clock connected on rtc clock line.
-    maxItems: 1
-
-required:
-  - compatible
-  - spi-max-frequency
-  - reg
-  - irq-gpios
-
-examples:
-  - |
-    spi1: spi@fc018000 {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      cs-gpios = <&pioB 21 0>;
-      status = "okay";
-      wilc_spi@0 {
-        compatible = "microchip,wilc1000-spi";
-        spi-max-frequency = <48000000>;
-        reg = <0>;
-        irq-gpios = <&pioC 27 0>;
-        clocks = <&pck1>;
-        clock-names = "rtc_clk";
-        assigned-clocks = <&pck1>;
-        assigned-clock-rates = <32768>;
-        status = "okay";
-      };
-    };
diff --git a/drivers/staging/wilc1000/microchip,wilc1000.yaml b/drivers/staging/wilc1000/microchip,wilc1000.yaml
new file mode 100644
index 000000000000..bc6cc5d3f347
--- /dev/null
+++ b/drivers/staging/wilc1000/microchip,wilc1000.yaml
@@ -0,0 +1,72 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip WILC wireless devicetree bindings
+
+maintainers:
+  - Adham Abozaeid <adham.abozaeid@microchip.com>
+  - Ajay Singh <ajay.kathat@microchip.com>
+
+description:
+  The wilc1000 chips can be connected via SPI or SDIO. This document
+  describes the binding to connect wilc devices.
+
+properties:
+  compatible:
+    const: microchip,wilc1000
+
+  spi-max-frequency: true
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: phandle to the clock connected on rtc clock line.
+    maxItems: 1
+
+  clock-names:
+    const: rtc
+
+required:
+  - compatible
+  - interrupts
+
+examples:
+  - |
+    spi1: spi@fc018000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      cs-gpios = <&pioB 21 0>;
+      wifi@0 {
+        compatible = "microchip,wilc1000";
+        spi-max-frequency = <48000000>;
+        reg = <0>;
+        interrupt-parent = <&pioC>;
+        interrupts = <27 0>;
+        clocks = <&pck1>;
+        clock-names = "rtc";
+      };
+    };
+
+  - |
+    mmc1: mmc@fc000000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+      non-removable;
+      vmmc-supply = <&vcc_mmc1_reg>;
+      vqmmc-supply = <&vcc_3v3_reg>;
+      bus-width = <4>;
+      wifi@0 {
+        compatible = "microchip,wilc1000";
+        reg = <0>;
+        interrupt-parent = <&pioC>;
+        interrupts = <27 0>;
+        clocks = <&pck1>;
+        clock-names = "rtc";
+      };
+    };