diff mbox series

[v6,12/17] wilc1000: add wlan.h

Message ID 20200327063302.20511-13-ajay.kathat@microchip.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series wilc1000: move out of staging | expand

Commit Message

Ajay Singh March 27, 2020, 6:33 a.m. UTC
From: Ajay Singh <ajay.kathat@microchip.com>

Moved 'drivers/staging/wilc1000/wlan.h' to
'drivers/net/wireless/microchip/wilc1000/wlan.h'.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
---
 .../net/wireless/microchip/wilc1000/wlan.h    | 397 ++++++++++++++++++
 1 file changed, 397 insertions(+)
 create mode 100644 drivers/net/wireless/microchip/wilc1000/wlan.h
diff mbox series

Patch

diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
new file mode 100644
index 000000000000..7689569cd82f
--- /dev/null
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -0,0 +1,397 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2012 - 2018 Microchip Technology Inc., and its subsidiaries.
+ * All rights reserved.
+ */
+
+#ifndef WILC_WLAN_H
+#define WILC_WLAN_H
+
+#include <linux/types.h>
+#include <linux/bitfield.h>
+
+/********************************************
+ *
+ *      Mac eth header length
+ *
+ ********************************************/
+#define MAX_MAC_HDR_LEN			26 /* QOS_MAC_HDR_LEN */
+#define SUB_MSDU_HEADER_LENGTH		14
+#define SNAP_HDR_LEN			8
+#define ETHERNET_HDR_LEN		14
+#define WORD_ALIGNMENT_PAD		0
+
+#define ETH_ETHERNET_HDR_OFFSET		(MAX_MAC_HDR_LEN + \
+					 SUB_MSDU_HEADER_LENGTH + \
+					 SNAP_HDR_LEN - \
+					 ETHERNET_HDR_LEN + \
+					 WORD_ALIGNMENT_PAD)
+
+#define HOST_HDR_OFFSET			4
+#define ETHERNET_HDR_LEN		14
+#define IP_HDR_LEN			20
+#define IP_HDR_OFFSET			ETHERNET_HDR_LEN
+#define UDP_HDR_OFFSET			(IP_HDR_LEN + IP_HDR_OFFSET)
+#define UDP_HDR_LEN			8
+#define UDP_DATA_OFFSET			(UDP_HDR_OFFSET + UDP_HDR_LEN)
+#define ETH_CONFIG_PKT_HDR_LEN		UDP_DATA_OFFSET
+
+#define ETH_CONFIG_PKT_HDR_OFFSET	(ETH_ETHERNET_HDR_OFFSET + \
+					 ETH_CONFIG_PKT_HDR_LEN)
+
+/********************************************
+ *
+ *      Register Defines
+ *
+ ********************************************/
+#define WILC_PERIPH_REG_BASE		0x1000
+#define WILC_CHANGING_VIR_IF		0x108c
+#define WILC_CHIPID			WILC_PERIPH_REG_BASE
+#define WILC_GLB_RESET_0		(WILC_PERIPH_REG_BASE + 0x400)
+#define WILC_PIN_MUX_0			(WILC_PERIPH_REG_BASE + 0x408)
+#define WILC_HOST_TX_CTRL		(WILC_PERIPH_REG_BASE + 0x6c)
+#define WILC_HOST_RX_CTRL_0		(WILC_PERIPH_REG_BASE + 0x70)
+#define WILC_HOST_RX_CTRL_1		(WILC_PERIPH_REG_BASE + 0x74)
+#define WILC_HOST_VMM_CTL		(WILC_PERIPH_REG_BASE + 0x78)
+#define WILC_HOST_RX_CTRL		(WILC_PERIPH_REG_BASE + 0x80)
+#define WILC_HOST_RX_EXTRA_SIZE		(WILC_PERIPH_REG_BASE + 0x84)
+#define WILC_HOST_TX_CTRL_1		(WILC_PERIPH_REG_BASE + 0x88)
+#define WILC_MISC			(WILC_PERIPH_REG_BASE + 0x428)
+#define WILC_INTR_REG_BASE		(WILC_PERIPH_REG_BASE + 0xa00)
+#define WILC_INTR_ENABLE		WILC_INTR_REG_BASE
+#define WILC_INTR2_ENABLE		(WILC_INTR_REG_BASE + 4)
+
+#define WILC_INTR_POLARITY		(WILC_INTR_REG_BASE + 0x10)
+#define WILC_INTR_TYPE			(WILC_INTR_REG_BASE + 0x20)
+#define WILC_INTR_CLEAR			(WILC_INTR_REG_BASE + 0x30)
+#define WILC_INTR_STATUS		(WILC_INTR_REG_BASE + 0x40)
+
+#define WILC_RF_REVISION_ID		0x13f4
+
+#define WILC_VMM_TBL_SIZE		64
+#define WILC_VMM_TX_TBL_BASE		0x150400
+#define WILC_VMM_RX_TBL_BASE		0x150500
+
+#define WILC_VMM_BASE			0x150000
+#define WILC_VMM_CORE_CTL		WILC_VMM_BASE
+#define WILC_VMM_TBL_CTL		(WILC_VMM_BASE + 0x4)
+#define WILC_VMM_TBL_ENTRY		(WILC_VMM_BASE + 0x8)
+#define WILC_VMM_TBL0_SIZE		(WILC_VMM_BASE + 0xc)
+#define WILC_VMM_TO_HOST_SIZE		(WILC_VMM_BASE + 0x10)
+#define WILC_VMM_CORE_CFG		(WILC_VMM_BASE + 0x14)
+#define WILC_VMM_TBL_ACTIVE		(WILC_VMM_BASE + 040)
+#define WILC_VMM_TBL_STATUS		(WILC_VMM_BASE + 0x44)
+
+#define WILC_SPI_REG_BASE		0xe800
+#define WILC_SPI_CTL			WILC_SPI_REG_BASE
+#define WILC_SPI_MASTER_DMA_ADDR	(WILC_SPI_REG_BASE + 0x4)
+#define WILC_SPI_MASTER_DMA_COUNT	(WILC_SPI_REG_BASE + 0x8)
+#define WILC_SPI_SLAVE_DMA_ADDR		(WILC_SPI_REG_BASE + 0xc)
+#define WILC_SPI_SLAVE_DMA_COUNT	(WILC_SPI_REG_BASE + 0x10)
+#define WILC_SPI_TX_MODE		(WILC_SPI_REG_BASE + 0x20)
+#define WILC_SPI_PROTOCOL_CONFIG	(WILC_SPI_REG_BASE + 0x24)
+#define WILC_SPI_INTR_CTL		(WILC_SPI_REG_BASE + 0x2c)
+#define WILC_SPI_INT_STATUS		(WILC_SPI_REG_BASE + 0x40)
+#define WILC_SPI_INT_CLEAR		(WILC_SPI_REG_BASE + 0x44)
+
+#define WILC_SPI_WAKEUP_REG		0x1
+#define WILC_SPI_WAKEUP_BIT		BIT(1)
+
+#define WILC_SPI_PROTOCOL_OFFSET	(WILC_SPI_PROTOCOL_CONFIG - \
+					 WILC_SPI_REG_BASE)
+
+#define WILC_SPI_CLOCKLESS_ADDR_LIMIT	0x30
+
+/* Functions IO enables bits */
+#define WILC_SDIO_CCCR_IO_EN_FUNC1	BIT(1)
+
+/* Function/Interrupt enables bits */
+#define WILC_SDIO_CCCR_IEN_MASTER	BIT(0)
+#define WILC_SDIO_CCCR_IEN_FUNC1	BIT(1)
+
+/* Abort CCCR register bits */
+#define WILC_SDIO_CCCR_ABORT_RESET	BIT(3)
+
+/* Vendor specific CCCR registers */
+#define WILC_SDIO_WAKEUP_REG		0xf0
+#define WILC_SDIO_WAKEUP_BIT		BIT(0)
+
+#define WILC_SDIO_CLK_STATUS_REG	0xf1
+#define WILC_SDIO_CLK_STATUS_BIT	BIT(0)
+
+#define WILC_SDIO_INTERRUPT_DATA_SZ_REG	0xf2 /* Read size (2 bytes) */
+
+#define WILC_SDIO_VMM_TBL_CTRL_REG	0xf6
+#define WILC_SDIO_IRQ_FLAG_REG		0xf7
+#define WILC_SDIO_IRQ_CLEAR_FLAG_REG	0xf8
+
+#define WILC_SDIO_HOST_TO_FW_REG	0xfa
+#define WILC_SDIO_HOST_TO_FW_BIT	BIT(0)
+
+#define WILC_SDIO_FW_TO_HOST_REG	0xfc
+#define WILC_SDIO_FW_TO_HOST_BIT	BIT(0)
+
+/* Function 1 specific FBR register */
+#define WILC_SDIO_FBR_CSA_REG		0x10C /* CSA pointer (3 bytes) */
+#define WILC_SDIO_FBR_DATA_REG		0x10F
+
+#define WILC_SDIO_F1_DATA_REG		0x0
+#define WILC_SDIO_EXT_IRQ_FLAG_REG	0x4
+
+#define WILC_AHB_DATA_MEM_BASE		0x30000
+#define WILC_AHB_SHARE_MEM_BASE		0xd0000
+
+#define WILC_VMM_TBL_RX_SHADOW_BASE	WILC_AHB_SHARE_MEM_BASE
+#define WILC_VMM_TBL_RX_SHADOW_SIZE	256
+
+#define WILC_FW_HOST_COMM		0x13c0
+#define WILC_GP_REG_0			0x149c
+#define WILC_GP_REG_1			0x14a0
+
+#define WILC_HAVE_SDIO_IRQ_GPIO		BIT(0)
+#define WILC_HAVE_USE_PMU		BIT(1)
+#define WILC_HAVE_SLEEP_CLK_SRC_RTC	BIT(2)
+#define WILC_HAVE_SLEEP_CLK_SRC_XO	BIT(3)
+#define WILC_HAVE_EXT_PA_INV_TX_RX	BIT(4)
+#define WILC_HAVE_LEGACY_RF_SETTINGS	BIT(5)
+#define WILC_HAVE_XTAL_24		BIT(6)
+#define WILC_HAVE_DISABLE_WILC_UART	BIT(7)
+#define WILC_HAVE_USE_IRQ_AS_HOST_WAKE	BIT(8)
+
+#define WILC_CORTUS_INTERRUPT_BASE	0x10A8
+#define WILC_CORTUS_INTERRUPT_1		(WILC_CORTUS_INTERRUPT_BASE + 0x4)
+#define WILC_CORTUS_INTERRUPT_2		(WILC_CORTUS_INTERRUPT_BASE + 0x8)
+
+/* tx control register 1 to 4 for RX */
+#define WILC_REG_4_TO_1_RX		0x1e1c
+
+/* tx control register 1 to 4 for TX Bank_0 */
+#define WILC_REG_4_TO_1_TX_BANK0	0x1e9c
+
+#define WILC_CORTUS_RESET_MUX_SEL	0x1118
+#define WILC_CORTUS_BOOT_REGISTER	0xc0000
+
+#define WILC_CORTUS_BOOT_FROM_IRAM	0x71
+
+#define WILC_1000_BASE_ID		0x100000
+
+#define WILC_1000_BASE_ID_2A		0x1002A0
+#define WILC_1000_BASE_ID_2A_REV1	(WILC_1000_BASE_ID_2A + 1)
+
+#define WILC_1000_BASE_ID_2B		0x1002B0
+#define WILC_1000_BASE_ID_2B_REV1	(WILC_1000_BASE_ID_2B + 1)
+#define WILC_1000_BASE_ID_2B_REV2	(WILC_1000_BASE_ID_2B + 2)
+
+#define WILC_CHIP_REV_FIELD		GENMASK(11, 0)
+
+/********************************************
+ *
+ *      Wlan Defines
+ *
+ ********************************************/
+#define WILC_CFG_PKT		1
+#define WILC_NET_PKT		0
+#define WILC_MGMT_PKT		2
+
+#define WILC_CFG_SET		1
+#define WILC_CFG_QUERY		0
+
+#define WILC_CFG_RSP		1
+#define WILC_CFG_RSP_STATUS	2
+#define WILC_CFG_RSP_SCAN	3
+
+#define WILC_ABORT_REQ_BIT		BIT(31)
+
+#define WILC_RX_BUFF_SIZE	(96 * 1024)
+#define WILC_TX_BUFF_SIZE	(64 * 1024)
+
+#define MODALIAS		"WILC_SPI"
+
+#define WILC_PKT_HDR_CONFIG_FIELD	BIT(31)
+#define WILC_PKT_HDR_OFFSET_FIELD	GENMASK(30, 22)
+#define WILC_PKT_HDR_TOTAL_LEN_FIELD	GENMASK(21, 11)
+#define WILC_PKT_HDR_LEN_FIELD		GENMASK(10, 0)
+
+#define WILC_INTERRUPT_DATA_SIZE	GENMASK(14, 0)
+
+#define WILC_VMM_BUFFER_SIZE		GENMASK(9, 0)
+
+#define WILC_VMM_HDR_TYPE		BIT(31)
+#define WILC_VMM_HDR_MGMT_FIELD		BIT(30)
+#define WILC_VMM_HDR_PKT_SIZE		GENMASK(29, 15)
+#define WILC_VMM_HDR_BUFF_SIZE		GENMASK(14, 0)
+
+#define WILC_VMM_ENTRY_COUNT		GENMASK(8, 3)
+#define WILC_VMM_ENTRY_AVAILABLE	BIT(2)
+/*******************************************/
+/*        E0 and later Interrupt flags.    */
+/*******************************************/
+/*******************************************/
+/*        E0 and later Interrupt flags.    */
+/*           IRQ Status word               */
+/* 15:0 = DMA count in words.              */
+/* 16: INT0 flag                           */
+/* 17: INT1 flag                           */
+/* 18: INT2 flag                           */
+/* 19: INT3 flag                           */
+/* 20: INT4 flag                           */
+/* 21: INT5 flag                           */
+/*******************************************/
+#define IRG_FLAGS_OFFSET	16
+#define IRQ_DMA_WD_CNT_MASK	GENMASK(IRG_FLAGS_OFFSET - 1, 0)
+#define INT_0			BIT(IRG_FLAGS_OFFSET)
+#define INT_1			BIT(IRG_FLAGS_OFFSET + 1)
+#define INT_2			BIT(IRG_FLAGS_OFFSET + 2)
+#define INT_3			BIT(IRG_FLAGS_OFFSET + 3)
+#define INT_4			BIT(IRG_FLAGS_OFFSET + 4)
+#define INT_5			BIT(IRG_FLAGS_OFFSET + 5)
+#define MAX_NUM_INT		5
+#define IRG_FLAGS_MASK		GENMASK(IRG_FLAGS_OFFSET + MAX_NUM_INT, \
+					IRG_FLAGS_OFFSET)
+
+/*******************************************/
+/*        E0 and later Interrupt flags.    */
+/*           IRQ Clear word                */
+/* 0: Clear INT0                           */
+/* 1: Clear INT1                           */
+/* 2: Clear INT2                           */
+/* 3: Clear INT3                           */
+/* 4: Clear INT4                           */
+/* 5: Clear INT5                           */
+/* 6: Select VMM table 1                   */
+/* 7: Select VMM table 2                   */
+/* 8: Enable VMM                           */
+/*******************************************/
+#define CLR_INT0		BIT(0)
+#define CLR_INT1		BIT(1)
+#define CLR_INT2		BIT(2)
+#define CLR_INT3		BIT(3)
+#define CLR_INT4		BIT(4)
+#define CLR_INT5		BIT(5)
+#define SEL_VMM_TBL0		BIT(6)
+#define SEL_VMM_TBL1		BIT(7)
+#define EN_VMM			BIT(8)
+
+#define DATA_INT_EXT		INT_0
+#define ALL_INT_EXT		DATA_INT_EXT
+#define NUM_INT_EXT		1
+#define UNHANDLED_IRQ_MASK	GENMASK(MAX_NUM_INT - 1, NUM_INT_EXT)
+
+#define DATA_INT_CLR		CLR_INT0
+
+#define ENABLE_RX_VMM		(SEL_VMM_TBL1 | EN_VMM)
+#define ENABLE_TX_VMM		(SEL_VMM_TBL0 | EN_VMM)
+/* time for expiring the completion of cfg packets */
+#define WILC_CFG_PKTS_TIMEOUT	msecs_to_jiffies(2000)
+
+#define IS_MANAGMEMENT		0x100
+#define IS_MANAGMEMENT_CALLBACK	0x080
+#define IS_MGMT_STATUS_SUCCES	0x040
+
+#define WILC_WID_TYPE		GENMASK(15, 12)
+#define WILC_VMM_ENTRY_FULL_RETRY	1
+/********************************************
+ *
+ *      Tx/Rx Queue Structure
+ *
+ ********************************************/
+
+struct txq_entry_t {
+	struct list_head list;
+	int type;
+	int ack_idx;
+	u8 *buffer;
+	int buffer_size;
+	void *priv;
+	int status;
+	struct wilc_vif *vif;
+	void (*tx_complete_func)(void *priv, int status);
+};
+
+struct rxq_entry_t {
+	struct list_head list;
+	u8 *buffer;
+	int buffer_size;
+};
+
+/********************************************
+ *
+ *      Host IF Structure
+ *
+ ********************************************/
+struct wilc;
+struct wilc_hif_func {
+	int (*hif_init)(struct wilc *wilc, bool resume);
+	int (*hif_deinit)(struct wilc *wilc);
+	int (*hif_read_reg)(struct wilc *wilc, u32 addr, u32 *data);
+	int (*hif_write_reg)(struct wilc *wilc, u32 addr, u32 data);
+	int (*hif_block_rx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_block_tx)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_read_int)(struct wilc *wilc, u32 *int_status);
+	int (*hif_clear_int_ext)(struct wilc *wilc, u32 val);
+	int (*hif_read_size)(struct wilc *wilc, u32 *size);
+	int (*hif_block_tx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_block_rx_ext)(struct wilc *wilc, u32 addr, u8 *buf, u32 size);
+	int (*hif_sync_ext)(struct wilc *wilc, int nint);
+	int (*enable_interrupt)(struct wilc *nic);
+	void (*disable_interrupt)(struct wilc *nic);
+};
+
+#define WILC_MAX_CFG_FRAME_SIZE		1468
+
+struct tx_complete_data {
+	int size;
+	void *buff;
+	struct sk_buff *skb;
+};
+
+struct wilc_cfg_cmd_hdr {
+	u8 cmd_type;
+	u8 seq_no;
+	__le16 total_len;
+	__le32 driver_handler;
+};
+
+struct wilc_cfg_frame {
+	struct wilc_cfg_cmd_hdr hdr;
+	u8 frame[WILC_MAX_CFG_FRAME_SIZE];
+};
+
+struct wilc_cfg_rsp {
+	u8 type;
+	u8 seq_no;
+};
+
+struct wilc;
+struct wilc_vif;
+
+int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
+				u32 buffer_size);
+int wilc_wlan_start(struct wilc *wilc);
+int wilc_wlan_stop(struct wilc *wilc, struct wilc_vif *vif);
+int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
+			      u32 buffer_size,
+			      void (*tx_complete_fn)(void *, int));
+int wilc_wlan_handle_txq(struct wilc *wl, u32 *txq_count);
+void wilc_handle_isr(struct wilc *wilc);
+void wilc_wlan_cleanup(struct net_device *dev);
+int wilc_wlan_cfg_set(struct wilc_vif *vif, int start, u16 wid, u8 *buffer,
+		      u32 buffer_size, int commit, u32 drv_handler);
+int wilc_wlan_cfg_get(struct wilc_vif *vif, int start, u16 wid, int commit,
+		      u32 drv_handler);
+int wilc_wlan_txq_add_mgmt_pkt(struct net_device *dev, void *priv, u8 *buffer,
+			       u32 buffer_size, void (*func)(void *, int));
+void wilc_enable_tcp_ack_filter(struct wilc_vif *vif, bool value);
+int wilc_wlan_get_num_conn_ifcs(struct wilc *wilc);
+netdev_tx_t wilc_mac_xmit(struct sk_buff *skb, struct net_device *dev);
+
+void wilc_wfi_p2p_rx(struct wilc_vif *vif, u8 *buff, u32 size);
+void host_wakeup_notify(struct wilc *wilc);
+void host_sleep_notify(struct wilc *wilc);
+void chip_allow_sleep(struct wilc *wilc);
+void chip_wakeup(struct wilc *wilc);
+int wilc_send_config_pkt(struct wilc_vif *vif, u8 mode, struct wid *wids,
+			 u32 count);
+int wilc_wlan_init(struct net_device *dev);
+u32 wilc_get_chipid(struct wilc *wilc, bool update);
+#endif