diff mbox series

[v3,8/9] rtw88: fill zeros to words 0x06 and 0x07 of security cam entry

Message ID 20200512102621.5148-9-yhchuang@realtek.com (mailing list archive)
State Accepted
Commit 504e2b288258e8e28d46f3e314be7cb460bdd655
Delegated to: Kalle Valo
Headers show
Series rtw88: 8723d: Add RF calibration and coex | expand

Commit Message

Tony Chuang May 12, 2020, 10:26 a.m. UTC 
From: Ping-Ke Shih <pkshih@realtek.com>

8723D adds some experimental features to word 0x06 of cam entry, so fill
zeros to initialize them to off state. For existing chips, these two words
are reserved and always zeros, so this change is harmless for them.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/sec.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw88/sec.c b/drivers/net/wireless/realtek/rtw88/sec.c
index d0d7fbb10d58..ce46e5b4a60a 100644
--- a/drivers/net/wireless/realtek/rtw88/sec.c
+++ b/drivers/net/wireless/realtek/rtw88/sec.c
@@ -44,7 +44,7 @@  void rtw_sec_write_cam(struct rtw_dev *rtwdev,
 
 	write_cmd = RTW_SEC_CMD_WRITE_ENABLE | RTW_SEC_CMD_POLLING;
 	addr = hw_key_idx << RTW_SEC_CAM_ENTRY_SHIFT;
-	for (i = 5; i >= 0; i--) {
+	for (i = 7; i >= 0; i--) {
 		switch (i) {
 		case 0:
 			content = ((key->keyidx & 0x3))		|
@@ -60,6 +60,10 @@  void rtw_sec_write_cam(struct rtw_dev *rtwdev,
 				  (cam->addr[4]		<< 16)	|
 				  (cam->addr[5]		<< 24);
 			break;
+		case 6:
+		case 7:
+			content = 0;
+			break;
 		default:
 			j = (i - 2) << 2;
 			content = (key->key[j])			|