diff mbox series

[7/9] ath11k: Add 6G scan dwell time parameter in scan request command

Message ID 20200518164424.29497-8-pradeepc@codeaurora.org (mailing list archive)
State Superseded
Delegated to: Kalle Valo
Headers show
Series add 6GHz radio support in ath11k driver | expand

Commit Message

Pradeep Kumar Chitrapu May 18, 2020, 4:44 p.m. UTC
Add 6G scan active and passive dwell time parameter to scan request.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 4 ++++
 drivers/net/wireless/ath/ath11k/wmi.h | 5 +++++
 2 files changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index c2e3a4d6f07e..dfa4bd7b44ad 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1899,6 +1899,8 @@  void ath11k_wmi_start_scan_init(struct ath11k *ar,
 	arg->dwell_time_active = 50;
 	arg->dwell_time_active_2g = 0;
 	arg->dwell_time_passive = 150;
+	arg->dwell_time_active_6g = 40;
+	arg->dwell_time_passive_6g = 30;
 	arg->min_rest_time = 50;
 	arg->max_rest_time = 500;
 	arg->repeat_probe_time = 0;
@@ -2045,6 +2047,8 @@  int ath11k_wmi_send_scan_start_cmd(struct ath11k *ar,
 	cmd->dwell_time_active = params->dwell_time_active;
 	cmd->dwell_time_active_2g = params->dwell_time_active_2g;
 	cmd->dwell_time_passive = params->dwell_time_passive;
+	cmd->dwell_time_active_6g = params->dwell_time_active_6g;
+	cmd->dwell_time_passive_6g = params->dwell_time_passive_6g;
 	cmd->min_rest_time = params->min_rest_time;
 	cmd->max_rest_time = params->max_rest_time;
 	cmd->repeat_probe_time = params->repeat_probe_time;
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 76c2da2c5db7..4937d02839fc 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -3061,6 +3061,9 @@  struct  wmi_start_scan_cmd {
 	u32 num_vendor_oui;
 	u32 scan_ctrl_flags_ext;
 	u32 dwell_time_active_2g;
+	u32 dwell_time_active_6g;
+	u32 dwell_time_passive_6g;
+	u32 scan_start_offset;
 } __packed;
 
 #define WMI_SCAN_FLAG_PASSIVE        0x1
@@ -3127,6 +3130,8 @@  struct scan_req_params {
 	u32 dwell_time_active;
 	u32 dwell_time_active_2g;
 	u32 dwell_time_passive;
+	u32 dwell_time_active_6g;
+	u32 dwell_time_passive_6g;
 	u32 min_rest_time;
 	u32 max_rest_time;
 	u32 repeat_probe_time;