diff mbox series

[v3,3/7] rtw88: 8821c: add dig related settings

Message ID 20200603093804.19779-4-yhchuang@realtek.com (mailing list archive)
State Superseded
Delegated to: Kalle Valo
Headers show
Series rtw88: 8821c: add basic function routines | expand

Commit Message

Tony Chuang June 3, 2020, 9:38 a.m. UTC 
From: Tzu-En Huang <tehuang@realtek.com>

To improve user experience in field, we need DIG to adjust RX initial
gain depends on field situation.

Define the register addresses for 8821c.

Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/rtw8821c.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821c.c b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
index d5ce4ce568dd..dfce8f6cb5fc 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821c.c
@@ -579,6 +579,10 @@  static const struct rtw_rfe_def rtw8821c_rfe_defs[] = {
 	[0] = RTW_DEF_RFE(8821c, 0, 0),
 };
 
+static struct rtw_hw_reg rtw8821c_dig[] = {
+	[0] = { .addr = 0xc50, .mask = 0x7f },
+};
+
 static const struct rtw_ltecoex_addr rtw8821c_ltecoex_addr = {
 	.ctrl = LTECOEX_ACCESS_CTRL,
 	.wdata = LTECOEX_WRITE_DATA,
@@ -660,6 +664,7 @@  struct rtw_chip_info rtw8821c_hw_spec = {
 	.csi_buf_pg_num = 0,
 	.band = RTW_BAND_2G | RTW_BAND_5G,
 	.page_size = 128,
+	.dig_min = 0x1c,
 	.ht_supported = true,
 	.vht_supported = true,
 	.lps_deep_mode_supported = BIT(LPS_DEEP_MODE_LCLK),
@@ -670,6 +675,7 @@  struct rtw_chip_info rtw8821c_hw_spec = {
 	.rqpn_table = rqpn_table_8821c,
 	.prioq_addrs = &prioq_addrs_8821c,
 	.intf_table = &phy_para_table_8821c,
+	.dig = rtw8821c_dig,
 	.rf_base_addr = {0x2800, 0x2c00},
 	.rf_sipi_addr = {0xc90, 0xe90},
 	.ltecoex_addr = &rtw8821c_ltecoex_addr,