diff mbox series

brcmfmac: reset SDIO bus on a firmware crash

Message ID 20200622144851.165248-1-chi-hsien.lin@cypress.com (mailing list archive)
State Accepted
Commit 7836102a750a92ddec19b7cd997a76f05c0a16ea
Delegated to: Kalle Valo
Headers show
Series brcmfmac: reset SDIO bus on a firmware crash | expand

Commit Message

Chi-Hsien Lin June 22, 2020, 2:48 p.m. UTC
commit 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash")
adds a reset function to recover firmware trap for PCIe bus. This commit
adds an implementation for SDIO bus.

Upon SDIO firmware trap, do below:
 - Remove the device
 - Reset hardware
 - Probe the device again

Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
 .../broadcom/brcm80211/brcmfmac/bcmsdh.c      |  4 +--
 .../broadcom/brcm80211/brcmfmac/sdio.c        | 34 ++++++++++++++++++-
 .../broadcom/brcm80211/brcmfmac/sdio.h        |  3 ++
 3 files changed, 38 insertions(+), 3 deletions(-)

Comments

Kalle Valo July 14, 2020, 9:49 a.m. UTC | #1
Chi-Hsien Lin <chi-hsien.lin@cypress.com> wrote:

> commit 4684997d9eea ("brcmfmac: reset PCIe bus on a firmware crash")
> adds a reset function to recover firmware trap for PCIe bus. This commit
> adds an implementation for SDIO bus.
> 
> Upon SDIO firmware trap, do below:
>  - Remove the device
>  - Reset hardware
>  - Probe the device again
> 
> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>

Patch applied to wireless-drivers-next.git, thanks.

7836102a750a brcmfmac: reset SDIO bus on a firmware crash
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 22a17ae09e94..15ac4636cae9 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -862,7 +862,7 @@  static void brcmf_sdiod_freezer_detach(struct brcmf_sdio_dev *sdiodev)
 }
 #endif /* CONFIG_PM_SLEEP */
 
-static int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
+int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev)
 {
 	sdiodev->state = BRCMF_SDIOD_DOWN;
 	if (sdiodev->bus) {
@@ -897,7 +897,7 @@  static void brcmf_sdiod_host_fixup(struct mmc_host *host)
 	host->caps |= MMC_CAP_NONREMOVABLE;
 }
 
-static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
+int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret = 0;
 	unsigned int f2_blksz = SDIO_FUNC2_BLOCKSIZE;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index ce6f15284277..f1f397fc3185 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -16,6 +16,7 @@ 
 #include <linux/mmc/sdio_ids.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/core.h>
 #include <linux/semaphore.h>
 #include <linux/firmware.h>
 #include <linux/module.h>
@@ -4096,6 +4097,36 @@  int brcmf_sdio_get_fwname(struct device *dev, const char *ext, u8 *fw_name)
 	return 0;
 }
 
+static int brcmf_sdio_bus_reset(struct device *dev)
+{
+	int ret = 0;
+	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
+	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+
+	brcmf_dbg(SDIO, "Enter\n");
+
+	/* start by unregistering irqs */
+	brcmf_sdiod_intr_unregister(sdiodev);
+
+	brcmf_sdiod_remove(sdiodev);
+
+	/* reset the adapter */
+	sdio_claim_host(sdiodev->func1);
+	mmc_hw_reset(sdiodev->func1->card->host);
+	sdio_release_host(sdiodev->func1);
+
+	brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_DOWN);
+
+	ret = brcmf_sdiod_probe(sdiodev);
+	if (ret) {
+		brcmf_err("Failed to probe after sdio device reset: ret %d\n",
+			  ret);
+		brcmf_sdiod_remove(sdiodev);
+	}
+
+	return ret;
+}
+
 static const struct brcmf_bus_ops brcmf_sdio_bus_ops = {
 	.stop = brcmf_sdio_bus_stop,
 	.preinit = brcmf_sdio_bus_preinit,
@@ -4107,7 +4138,8 @@  static const struct brcmf_bus_ops brcmf_sdio_bus_ops = {
 	.get_ramsize = brcmf_sdio_bus_get_ramsize,
 	.get_memdump = brcmf_sdio_bus_get_memdump,
 	.get_fwname = brcmf_sdio_get_fwname,
-	.debugfs_create = brcmf_sdio_debugfs_create
+	.debugfs_create = brcmf_sdio_debugfs_create,
+	.reset = brcmf_sdio_bus_reset
 };
 
 #define BRCMF_SDIO_FW_CODE	0
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index 163fd664780a..12108927fb50 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -367,6 +367,9 @@  static inline void brcmf_sdiod_freezer_uncount(struct brcmf_sdio_dev *sdiodev)
 }
 #endif /* CONFIG_PM_SLEEP */
 
+int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev);
+int brcmf_sdiod_remove(struct brcmf_sdio_dev *sdiodev);
+
 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
 void brcmf_sdio_remove(struct brcmf_sdio *bus);
 void brcmf_sdio_isr(struct brcmf_sdio *bus);