diff mbox series

[27/30] wireless: broadcom: brcm80211: phy_lcn: Remove a bunch of unused variables

Message ID 20200826093401.1458456-28-lee.jones@linaro.org (mailing list archive)
State Accepted
Commit 38c95e0258a067812311e84d2a170fd56f05431d
Delegated to: Kalle Valo
Headers show
Series Set 3: Rid W=1 warnings in Wireless | expand

Commit Message

Lee Jones Aug. 26, 2020, 9:33 a.m. UTC
Fixes the following W=1 kernel build warning(s):

 In file included from drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:11:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_rx_iq_cal’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1366:29: warning: variable ‘RFOverride0_old’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_radio_2064_channel_tune_4313’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:21: warning: variable ‘qFvco’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:14: warning: variable ‘qFref’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:6: warning: variable ‘qFxtal’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_idle_tssi_est’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:2856:6: warning: variable ‘idleTssi’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_tx_iqlo_soft_cal_full’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:53: warning: variable ‘locc4’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:46: warning: variable ‘locc3’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:39: warning: variable ‘locc2’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:32: warning: variable ‘iqcc0’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_periodic_cal’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4196:6: warning: variable ‘rx_iqcomp_sz’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4195:33: warning: variable ‘rx_iqcomp’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4194:16: warning: variable ‘full_cal’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_phy_txpwr_srom_read_lcnphy’:
 drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4919:7: warning: variable ‘opo’ set but not used [-Wunused-but-set-variable]

Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 .../broadcom/brcm80211/brcmsmac/phy/phy_lcn.c | 40 +++++--------------
 1 file changed, 11 insertions(+), 29 deletions(-)

Comments

Kalle Valo Sept. 1, 2020, 1:16 p.m. UTC | #1
Lee Jones <lee.jones@linaro.org> wrote:

> Fixes the following W=1 kernel build warning(s):
> 
>  In file included from drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:11:
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_rx_iq_cal’:
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1366:29: warning: variable ‘RFOverride0_old’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_radio_2064_channel_tune_4313’:
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:21: warning: variable ‘qFvco’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:14: warning: variable ‘qFref’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:6: warning: variable ‘qFxtal’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_idle_tssi_est’:
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:2856:6: warning: variable ‘idleTssi’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_tx_iqlo_soft_cal_full’:
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:53: warning: variable ‘locc4’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:46: warning: variable ‘locc3’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:39: warning: variable ‘locc2’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:32: warning: variable ‘iqcc0’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_periodic_cal’:
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4196:6: warning: variable ‘rx_iqcomp_sz’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4195:33: warning: variable ‘rx_iqcomp’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4194:16: warning: variable ‘full_cal’ set but not used [-Wunused-but-set-variable]
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_phy_txpwr_srom_read_lcnphy’:
>  drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4919:7: warning: variable ‘opo’ set but not used [-Wunused-but-set-variable]
> 
> Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
> Cc: Franky Lin <franky.lin@broadcom.com>
> Cc: Hante Meuleman <hante.meuleman@broadcom.com>
> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
> Cc: Wright Feng <wright.feng@cypress.com>
> Cc: Kalle Valo <kvalo@codeaurora.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: linux-wireless@vger.kernel.org
> Cc: brcm80211-dev-list.pdl@broadcom.com
> Cc: brcm80211-dev-list@cypress.com
> Cc: netdev@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

4 patches applied to wireless-drivers-next.git, thanks.

38c95e0258a0 brcmsmac: phy_lcn: Remove a bunch of unused variables
a36e4e4a898b brcmsmac: phy_n: Remove a bunch of unused variables
ebcfc66f56a4 brcmsmac: phytbl_lcn: Remove unused array 'dot11lcnphytbl_rx_gain_info_rev1'
e1920d6ae6bd brcmsmac: phytbl_n: Remove a few unused arrays
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
index 7ef36234a25dc..b8193c99e8642 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -1363,7 +1363,7 @@  wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
 	u16 tx_pwr_ctrl;
 	u8 tx_gain_index_old = 0;
 	bool result = false, tx_gain_override_old = false;
-	u16 i, Core1TxControl_old, RFOverride0_old,
+	u16 i, Core1TxControl_old,
 	    RFOverrideVal0_old, rfoverride2_old, rfoverride2val_old,
 	    rfoverride3_old, rfoverride3val_old, rfoverride4_old,
 	    rfoverride4val_old, afectrlovr_old, afectrlovrval_old;
@@ -1404,7 +1404,7 @@  wlc_lcnphy_rx_iq_cal(struct brcms_phy *pi,
 
 	or_phy_reg(pi, 0x631, 0x0015);
 
-	RFOverride0_old = read_phy_reg(pi, 0x44c);
+	read_phy_reg(pi, 0x44c); /* RFOverride0_old */
 	RFOverrideVal0_old = read_phy_reg(pi, 0x44d);
 	rfoverride2_old = read_phy_reg(pi, 0x4b0);
 	rfoverride2val_old = read_phy_reg(pi, 0x4b1);
@@ -1664,7 +1664,7 @@  wlc_lcnphy_radio_2064_channel_tune_4313(struct brcms_phy *pi, u8 channel)
 	const struct chan_info_2064_lcnphy *ci;
 	u8 rfpll_doubler = 0;
 	u8 pll_pwrup, pll_pwrup_ovr;
-	s32 qFxtal, qFref, qFvco, qFcal;
+	s32 qFcal;
 	u8 d15, d16, f16, e44, e45;
 	u32 div_int, div_frac, fvco3, fpfd, fref3, fcal_div;
 	u16 loop_bw, d30, setCount;
@@ -1738,10 +1738,7 @@  wlc_lcnphy_radio_2064_channel_tune_4313(struct brcms_phy *pi, u8 channel)
 	fvco3 = (ci->freq * 3);
 	fref3 = 2 * fpfd;
 
-	qFxtal = wlc_lcnphy_qdiv_roundup(pi->xtalfreq, PLL_2064_MHZ, 16);
-	qFref = wlc_lcnphy_qdiv_roundup(fpfd, PLL_2064_MHZ, 16);
 	qFcal = pi->xtalfreq * fcal_div / PLL_2064_MHZ;
-	qFvco = wlc_lcnphy_qdiv_roundup(fvco3, 2, 16);
 
 	write_radio_reg(pi, RADIO_2064_REG04F, 0x02);
 
@@ -2853,7 +2850,7 @@  static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi)
 	bool suspend, tx_gain_override_old;
 	struct lcnphy_txgains old_gains;
 	struct brcms_phy *pi = container_of(ppi, struct brcms_phy, pubpi_ro);
-	u16 idleTssi, idleTssi0_2C, idleTssi0_OB, idleTssi0_regvalue_OB,
+	u16 idleTssi0_2C, idleTssi0_OB, idleTssi0_regvalue_OB,
 	    idleTssi0_regvalue_2C;
 	u16 SAVE_txpwrctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
 	u16 SAVE_lpfgain = read_radio_reg(pi, RADIO_2064_REG112);
@@ -2863,7 +2860,7 @@  static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi)
 	u16 SAVE_iqadc_aux_en = read_radio_reg(pi, RADIO_2064_REG11F) & 4;
 	u8 SAVE_bbmult = wlc_lcnphy_get_bbmult(pi);
 
-	idleTssi = read_phy_reg(pi, 0x4ab);
+	read_phy_reg(pi, 0x4ab); /* idleTssi */
 	suspend = (0 == (bcma_read32(pi->d11core, D11REGOFFS(maccontrol)) &
 			 MCTL_EN_MAC));
 	if (!suspend)
@@ -2887,8 +2884,7 @@  static void wlc_lcnphy_idle_tssi_est(struct brcms_phy_pub *ppi)
 	wlc_lcnphy_set_bbmult(pi, 0x0);
 
 	wlc_phy_do_dummy_tx(pi, true, OFF);
-	idleTssi = ((read_phy_reg(pi, 0x4ab) & (0x1ff << 0))
-		    >> 0);
+	read_phy_reg(pi, 0x4ab); /* idleTssi */
 
 	idleTssi0_2C = ((read_phy_reg(pi, 0x63e) & (0x1ff << 0))
 			>> 0);
@@ -3858,8 +3854,6 @@  void wlc_lcnphy_get_tx_iqcc(struct brcms_phy *pi, u16 *a, u16 *b)
 
 static void wlc_lcnphy_tx_iqlo_soft_cal_full(struct brcms_phy *pi)
 {
-	struct lcnphy_unsign16_struct iqcc0, locc2, locc3, locc4;
-
 	wlc_lcnphy_set_cc(pi, 0, 0, 0);
 	wlc_lcnphy_set_cc(pi, 2, 0, 0);
 	wlc_lcnphy_set_cc(pi, 3, 0, 0);
@@ -3872,10 +3866,10 @@  static void wlc_lcnphy_tx_iqlo_soft_cal_full(struct brcms_phy *pi)
 	wlc_lcnphy_a1(pi, 2, 2, 1);
 	wlc_lcnphy_a1(pi, 0, 4, 3);
 
-	iqcc0 = wlc_lcnphy_get_cc(pi, 0);
-	locc2 = wlc_lcnphy_get_cc(pi, 2);
-	locc3 = wlc_lcnphy_get_cc(pi, 3);
-	locc4 = wlc_lcnphy_get_cc(pi, 4);
+	wlc_lcnphy_get_cc(pi, 0);
+	wlc_lcnphy_get_cc(pi, 2);
+	wlc_lcnphy_get_cc(pi, 3);
+	wlc_lcnphy_get_cc(pi, 4);
 }
 
 u16 wlc_lcnphy_get_tx_locc(struct brcms_phy *pi)
@@ -4191,9 +4185,7 @@  static void wlc_lcnphy_glacial_timer_based_cal(struct brcms_phy *pi)
 
 static void wlc_lcnphy_periodic_cal(struct brcms_phy *pi)
 {
-	bool suspend, full_cal;
-	const struct lcnphy_rx_iqcomp *rx_iqcomp;
-	int rx_iqcomp_sz;
+	bool suspend;
 	u16 SAVE_pwrctrl = wlc_lcnphy_get_tx_pwr_ctrl(pi);
 	s8 index;
 	struct phytbl_info tab;
@@ -4203,9 +4195,6 @@  static void wlc_lcnphy_periodic_cal(struct brcms_phy *pi)
 
 	pi->phy_lastcal = pi->sh->now;
 	pi->phy_forcecal = false;
-	full_cal =
-		(pi_lcn->lcnphy_full_cal_channel !=
-		 CHSPEC_CHANNEL(pi->radio_chanspec));
 	pi_lcn->lcnphy_full_cal_channel = CHSPEC_CHANNEL(pi->radio_chanspec);
 	index = pi_lcn->lcnphy_current_index;
 
@@ -4220,9 +4209,6 @@  static void wlc_lcnphy_periodic_cal(struct brcms_phy *pi)
 
 	wlc_lcnphy_txpwrtbl_iqlo_cal(pi);
 
-	rx_iqcomp = lcnphy_rx_iqcomp_table_rev0;
-	rx_iqcomp_sz = ARRAY_SIZE(lcnphy_rx_iqcomp_table_rev0);
-
 	if (LCNREV_IS(pi->pubpi.phy_rev, 1))
 		wlc_lcnphy_rx_iq_cal(pi, NULL, 0, true, false, 1, 40);
 	else
@@ -4916,10 +4902,6 @@  static bool wlc_phy_txpwr_srom_read_lcnphy(struct brcms_phy *pi)
 				offset_ofdm >>= 4;
 			}
 		} else {
-			u8 opo = 0;
-
-			opo = sprom->opo;
-
 			for (i = TXP_FIRST_CCK; i <= TXP_LAST_CCK; i++)
 				pi->tx_srom_max_rate_2g[i] = txpwr;