@@ -90,7 +90,7 @@ il3945_get_prev_ieee_rate(u8 rate_idx)
#define IL_EVT_DISABLE (0)
#define IL_EVT_DISABLE_SIZE (1532/32)
-/**
+/*
* il3945_disable_events - Disable selected events in uCode event log
*
* Disable an event by writing "1"s into "disable"
@@ -261,7 +261,7 @@ il3945_rs_next_rate(struct il_priv *il, int rate)
return next_rate;
}
-/**
+/*
* il3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
*
* When FW advances 'R' idx, all entries between old and new 'R' idx
@@ -291,7 +291,7 @@ il3945_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx)
il_wake_queue(il, txq);
}
-/**
+/*
* il3945_hdl_tx - Handle Tx response
*/
static void
@@ -627,7 +627,7 @@ il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
return 0;
}
-/**
+/*
* il3945_hw_txq_free_tfd - Free one TFD, those at idx [txq->q.read_ptr]
*
* Does NOT advance any idxes
@@ -675,7 +675,7 @@ il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
}
}
-/**
+/*
* il3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
*
*/
@@ -828,7 +828,7 @@ il3945_tx_reset(struct il_priv *il)
return 0;
}
-/**
+/*
* il3945_txq_ctx_reset - Reset TX queue context
*
* Destroys all DMA structures and initialize them again
@@ -993,7 +993,7 @@ il3945_hw_nic_init(struct il_priv *il)
return 0;
}
-/**
+/*
* il3945_hw_txq_ctx_free - Free TXQ Context
*
* Destroy all TX DMA queues and structures
@@ -1035,7 +1035,7 @@ il3945_hw_txq_ctx_stop(struct il_priv *il)
}
}
-/**
+/*
* il3945_hw_reg_adjust_power_by_temp
* return idx delta into power gain settings table
*/
@@ -1045,7 +1045,7 @@ il3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
return (new_reading - old_reading) * (-11) / 100;
}
-/**
+/*
* il3945_hw_reg_temp_out_of_range - Keep temperature in sane range
*/
static inline int
@@ -1060,7 +1060,7 @@ il3945_hw_get_temperature(struct il_priv *il)
return _il_rd(il, CSR_UCODE_DRV_GP2);
}
-/**
+/*
* il3945_hw_reg_txpower_get_temperature
* get the current temperature by reading from NIC
*/
@@ -1096,7 +1096,7 @@ il3945_hw_reg_txpower_get_temperature(struct il_priv *il)
* Both are lower than older versions' 9 degrees */
#define IL_TEMPERATURE_LIMIT_TIMER 6
-/**
+/*
* il3945_is_temp_calib_needed - determines if new calibration is needed
*
* records new temperature in tx_mgr->temperature.
@@ -1315,7 +1315,7 @@ il3945_hw_reg_fix_power_idx(int idx)
/* Kick off thermal recalibration check every 60 seconds */
#define REG_RECALIB_PERIOD (60)
-/**
+/*
* il3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
*
* Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
@@ -1372,7 +1372,7 @@ il3945_hw_reg_set_scan_power(struct il_priv *il, u32 scan_tbl_idx, s32 rate_idx,
power_gain_table[band_idx][power_idx].dsp_atten;
}
-/**
+/*
* il3945_send_tx_power - fill in Tx Power command with gain settings
*
* Configures power settings for all rates for the current channel,
@@ -1439,7 +1439,7 @@ il3945_send_tx_power(struct il_priv *il)
}
-/**
+/*
* il3945_hw_reg_set_new_power - Configures power tables at new levels
* @ch_info: Channel to update. Uses power_info.requested_power.
*
@@ -1510,7 +1510,7 @@ il3945_hw_reg_set_new_power(struct il_priv *il, struct il_channel_info *ch_info)
return 0;
}
-/**
+/*
* il3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
*
* NOTE: Returned power limit may be less (but not more) than requested,
@@ -1537,7 +1537,7 @@ il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info *ch_info)
return min(max_power, ch_info->max_power_avg);
}
-/**
+/*
* il3945_hw_reg_comp_txpower_temp - Compensate for temperature
*
* Compensate txpower settings of *all* channels for temperature.
@@ -1699,7 +1699,7 @@ il3945_send_rxon_assoc(struct il_priv *il)
return rc;
}
-/**
+/*
* il3945_commit_rxon - commit staging_rxon to hardware
*
* The RXON command in staging_rxon is committed to the hardware and
@@ -1830,7 +1830,7 @@ il3945_commit_rxon(struct il_priv *il)
return 0;
}
-/**
+/*
* il3945_reg_txpower_periodic - called when time to check our temperature.
*
* -- reset periodic timer
@@ -1873,7 +1873,7 @@ il3945_bg_reg_txpower_periodic(struct work_struct *work)
mutex_unlock(&il->mutex);
}
-/**
+/*
* il3945_hw_reg_get_ch_grp_idx - find the channel-group idx (0-4) for channel.
*
* This function is used when initializing channel-info structs.
@@ -1912,7 +1912,7 @@ il3945_hw_reg_get_ch_grp_idx(struct il_priv *il,
return group_idx;
}
-/**
+/*
* il3945_hw_reg_get_matched_power_idx - Interpolate to get nominal idx
*
* Interpolate to get nominal (i.e. at factory calibration temperature) idx
@@ -2035,7 +2035,7 @@ il3945_hw_reg_init_channel_groups(struct il_priv *il)
}
}
-/**
+/*
* il3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
*
* Second pass (during init) to set up il->channel_info
@@ -2305,7 +2305,7 @@ il3945_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif,
vif->bss_conf.bssid);
}
-/**
+/*
* il3945_init_hw_rate_table - Initialize the hardware rate fallback table
*/
int
@@ -2520,7 +2520,7 @@ il3945_eeprom_release_semaphore(struct il_priv *il)
return;
}
- /**
+ /*
* il3945_load_bsm - Load bootstrap instructions
*
* BSM operation:
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/intel/iwlegacy/3945.c:104: warning: Function parameter or member 'il' not described in 'il3945_disable_events' drivers/net/wireless/intel/iwlegacy/3945.c:273: warning: Function parameter or member 'il' not described in 'il3945_tx_queue_reclaim' drivers/net/wireless/intel/iwlegacy/3945.c:273: warning: Function parameter or member 'txq_id' not described in 'il3945_tx_queue_reclaim' drivers/net/wireless/intel/iwlegacy/3945.c:273: warning: Function parameter or member 'idx' not described in 'il3945_tx_queue_reclaim' drivers/net/wireless/intel/iwlegacy/3945.c:299: warning: Function parameter or member 'il' not described in 'il3945_hdl_tx' drivers/net/wireless/intel/iwlegacy/3945.c:299: warning: Function parameter or member 'rxb' not described in 'il3945_hdl_tx' drivers/net/wireless/intel/iwlegacy/3945.c:637: warning: Function parameter or member 'il' not described in 'il3945_hw_txq_free_tfd' drivers/net/wireless/intel/iwlegacy/3945.c:637: warning: Function parameter or member 'txq' not described in 'il3945_hw_txq_free_tfd' drivers/net/wireless/intel/iwlegacy/3945.c:686: warning: Function parameter or member 'il' not described in 'il3945_hw_build_tx_cmd_rate' drivers/net/wireless/intel/iwlegacy/3945.c:686: warning: Function parameter or member 'cmd' not described in 'il3945_hw_build_tx_cmd_rate' drivers/net/wireless/intel/iwlegacy/3945.c:686: warning: Function parameter or member 'info' not described in 'il3945_hw_build_tx_cmd_rate' drivers/net/wireless/intel/iwlegacy/3945.c:686: warning: Function parameter or member 'hdr' not described in 'il3945_hw_build_tx_cmd_rate' drivers/net/wireless/intel/iwlegacy/3945.c:686: warning: Function parameter or member 'sta_id' not described in 'il3945_hw_build_tx_cmd_rate' drivers/net/wireless/intel/iwlegacy/3945.c:838: warning: Function parameter or member 'il' not described in 'il3945_txq_ctx_reset' drivers/net/wireless/intel/iwlegacy/3945.c:1003: warning: Function parameter or member 'il' not described in 'il3945_hw_txq_ctx_free' drivers/net/wireless/intel/iwlegacy/3945.c:1044: warning: Function parameter or member 'new_reading' not described in 'il3945_hw_reg_adjust_power_by_temp' drivers/net/wireless/intel/iwlegacy/3945.c:1044: warning: Function parameter or member 'old_reading' not described in 'il3945_hw_reg_adjust_power_by_temp' drivers/net/wireless/intel/iwlegacy/3945.c:1053: warning: Function parameter or member 'temperature' not described in 'il3945_hw_reg_temp_out_of_range' drivers/net/wireless/intel/iwlegacy/3945.c:1069: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_txpower_get_temperature' drivers/net/wireless/intel/iwlegacy/3945.c:1107: warning: Function parameter or member 'il' not described in 'il3945_is_temp_calib_needed' drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_set_scan_power' drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'scan_tbl_idx' not described in 'il3945_hw_reg_set_scan_power' drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'rate_idx' not described in 'il3945_hw_reg_set_scan_power' drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'clip_pwrs' not described in 'il3945_hw_reg_set_scan_power' drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'ch_info' not described in 'il3945_hw_reg_set_scan_power' drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'band_idx' not described in 'il3945_hw_reg_set_scan_power' drivers/net/wireless/intel/iwlegacy/3945.c:1383: warning: Function parameter or member 'il' not described in 'il3945_send_tx_power' drivers/net/wireless/intel/iwlegacy/3945.c:1460: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_set_new_power' drivers/net/wireless/intel/iwlegacy/3945.c:1522: warning: Function parameter or member 'ch_info' not described in 'il3945_hw_reg_get_ch_txpower_limit' drivers/net/wireless/intel/iwlegacy/3945.c:1552: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_comp_txpower_temp' drivers/net/wireless/intel/iwlegacy/3945.c:1712: warning: Function parameter or member 'il' not described in 'il3945_commit_rxon' drivers/net/wireless/intel/iwlegacy/3945.c:1845: warning: Function parameter or member 'il' not described in 'il3945_reg_txpower_periodic' drivers/net/wireless/intel/iwlegacy/3945.c:1889: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_get_ch_grp_idx' drivers/net/wireless/intel/iwlegacy/3945.c:1889: warning: Function parameter or member 'ch_info' not described in 'il3945_hw_reg_get_ch_grp_idx' drivers/net/wireless/intel/iwlegacy/3945.c:1924: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_get_matched_power_idx' drivers/net/wireless/intel/iwlegacy/3945.c:1924: warning: Function parameter or member 'requested_power' not described in 'il3945_hw_reg_get_matched_power_idx' drivers/net/wireless/intel/iwlegacy/3945.c:1924: warning: Function parameter or member 'setting_idx' not described in 'il3945_hw_reg_get_matched_power_idx' drivers/net/wireless/intel/iwlegacy/3945.c:1924: warning: Function parameter or member 'new_idx' not described in 'il3945_hw_reg_get_matched_power_idx' drivers/net/wireless/intel/iwlegacy/3945.c:2055: warning: Function parameter or member 'il' not described in 'il3945_txpower_set_from_eeprom' drivers/net/wireless/intel/iwlegacy/3945.c:2313: warning: Function parameter or member 'il' not described in 'il3945_init_hw_rate_table' Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Linux Wireless <ilw@linux.intel.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/net/wireless/intel/iwlegacy/3945.c | 46 +++++++++++----------- 1 file changed, 23 insertions(+), 23 deletions(-)