diff mbox series

[v5,2/7] wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params()

Message ID 20200910150552.2178882-3-bryan.odonoghue@linaro.org (mailing list archive)
State Accepted
Commit 21ba284ca9f07e9d523829ccdfb6027fd0d8e46d
Delegated to: Kalle Valo
Headers show
Series wcn36xx: Add a set of helpers to enable VHT parameter passing | expand

Commit Message

Bryan O'Donoghue Sept. 10, 2020, 3:05 p.m. UTC 
This commit adds support for setting default VHT parameters, which are
exposed by the extended version 1 STA parameter type.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/smd.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index d5ca9907af86..bf584ac382cb 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -190,6 +190,24 @@  static void wcn36xx_smd_set_sta_default_ht_params(
 	sta_params->dsss_cck_mode_40mhz = 1;
 }
 
+void wcn36xx_smd_set_sta_default_vht_params(struct wcn36xx *wcn,
+		struct wcn36xx_hal_config_sta_params_v1 *sta_params);
+void wcn36xx_smd_set_sta_default_vht_params(struct wcn36xx *wcn,
+		struct wcn36xx_hal_config_sta_params_v1 *sta_params)
+{
+	if (wcn->rf_id == RF_IRIS_WCN3680) {
+		sta_params->vht_capable = 1;
+		sta_params->vht_tx_mu_beamformee_capable = 1;
+	} else {
+		sta_params->vht_capable = 0;
+		sta_params->vht_tx_mu_beamformee_capable = 0;
+	}
+
+	sta_params->vht_ldpc_enabled = 0;
+	sta_params->vht_tx_channel_width_set = 0;
+	sta_params->vht_tx_bf_enabled = 0;
+}
+
 static void wcn36xx_smd_set_sta_params(struct wcn36xx *wcn,
 		struct ieee80211_vif *vif,
 		struct ieee80211_sta *sta,