@@ -529,6 +529,13 @@ static void mwifiex_pcie_reset_prepare(struct pci_dev *pdev)
mwifiex_shutdown_sw(adapter);
clear_bit(MWIFIEX_IFACE_WORK_DEVICE_DUMP, &card->work_flags);
clear_bit(MWIFIEX_IFACE_WORK_CARD_RESET, &card->work_flags);
+
+ /* For Surface gen4+ devices, we need to put wifi into D3cold right
+ * before performing FLR
+ */
+ if (card->quirks & QUIRK_FW_RST_D3COLD)
+ mwifiex_pcie_reset_d3cold_quirk(pdev);
+
mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);
}
@@ -21,7 +21,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 4"),
},
- .driver_data = 0,
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
},
{
.ident = "Surface Pro 5",
@@ -30,7 +30,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1796"),
},
- .driver_data = 0,
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
},
{
.ident = "Surface Pro 5 (LTE)",
@@ -39,7 +39,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "Surface_Pro_1807"),
},
- .driver_data = 0,
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
},
{
.ident = "Surface Pro 6",
@@ -47,7 +47,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Pro 6"),
},
- .driver_data = 0,
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
},
{
.ident = "Surface Book 1",
@@ -55,7 +55,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book"),
},
- .driver_data = 0,
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
},
{
.ident = "Surface Book 2",
@@ -63,7 +63,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Book 2"),
},
- .driver_data = 0,
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
},
{
.ident = "Surface Laptop 1",
@@ -71,7 +71,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop"),
},
- .driver_data = 0,
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
},
{
.ident = "Surface Laptop 2",
@@ -79,7 +79,7 @@ static const struct dmi_system_id mwifiex_quirk_table[] = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Surface Laptop 2"),
},
- .driver_data = 0,
+ .driver_data = (void *)QUIRK_FW_RST_D3COLD,
},
{
.ident = "Surface 3",
@@ -111,4 +111,61 @@ void mwifiex_initialize_quirks(struct pcie_service_card *card)
if (!card->quirks)
dev_info(&pdev->dev, "no quirks enabled\n");
+ if (card->quirks & QUIRK_FW_RST_D3COLD)
+ dev_info(&pdev->dev, "quirk reset_d3cold enabled\n");
+}
+
+static void mwifiex_pcie_set_power_d3cold(struct pci_dev *pdev)
+{
+ dev_info(&pdev->dev, "putting into D3cold...\n");
+
+ pci_save_state(pdev);
+ if (pci_is_enabled(pdev))
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3cold);
+}
+
+static int mwifiex_pcie_set_power_d0(struct pci_dev *pdev)
+{
+ int ret;
+
+ dev_info(&pdev->dev, "putting into D0...\n");
+
+ pci_set_power_state(pdev, PCI_D0);
+ ret = pci_enable_device(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "pci_enable_device failed\n");
+ return ret;
+ }
+ pci_restore_state(pdev);
+
+ return 0;
+}
+
+int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev)
+{
+ struct pci_dev *parent_pdev = pci_upstream_bridge(pdev);
+ int ret;
+
+ /* Power-cycle (put into D3cold then D0) */
+ dev_info(&pdev->dev, "Using reset_d3cold quirk to perform FW reset\n");
+
+ /* We need to perform power-cycle also for bridge of wifi because
+ * on some devices (e.g. Surface Book 1), the OS for some reasons
+ * can't know the real power state of the bridge.
+ * When tried to power-cycle only wifi, the reset failed with the
+ * following dmesg log:
+ * "Cannot transition to power state D0 for parent in D3hot".
+ */
+ mwifiex_pcie_set_power_d3cold(pdev);
+ mwifiex_pcie_set_power_d3cold(parent_pdev);
+
+ ret = mwifiex_pcie_set_power_d0(parent_pdev);
+ if (ret)
+ return ret;
+ ret = mwifiex_pcie_set_power_d0(pdev);
+ if (ret)
+ return ret;
+
+ return 0;
}
@@ -6,6 +6,7 @@
#include "pcie.h"
/* quirks */
-// quirk flags can be added here
+#define QUIRK_FW_RST_D3COLD BIT(0)
void mwifiex_initialize_quirks(struct pcie_service_card *card);
+int mwifiex_pcie_reset_d3cold_quirk(struct pci_dev *pdev);
To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it seems that putting the wifi device into D3cold is required according to errata.inf file on Windows installation (Windows/INF/errata.inf). This patch adds a function that performs power-cycle (put into D3cold then D0) and call the function at the end of reset_prepare(). Note: Need to also reset the parent device (bridge) of wifi on SB1; it might be because the bridge of wifi always reports it's in D3hot. When I tried to reset only the wifi device (not touching parent), it gave the following error and the reset failed: acpi device:4b: Cannot transition to power state D0 for parent in D3hot mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible) Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> --- Current issue: * After reset with this quirk, ASPM settings don't get restored. Below is the "sudo lspci -nnvvv" diff before/after fw reset on Surface Book 1: # # 03:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88W8897 [AVASTAR] 802.11ac Wireless [11ab:2b38] # @@ -574,9 +574,9 @@ Capabilities: [168 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=70us PortTPowerOnTime=10us - L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ - T_CommonMode=0us LTR1.2_Threshold=163840ns - L1SubCtl2: T_PwrOn=44us + L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- + T_CommonMode=0us LTR1.2_Threshold=0ns + L1SubCtl2: T_PwrOn=10us Kernel driver in use: mwifiex_pcie Kernel modules: mwifiex_pcie # # no changes on root port of wifi regarding ASPM # As you see, all of the L1 substates are disabled after fw reset. LTR value is also changed. drivers/net/wireless/marvell/mwifiex/pcie.c | 7 ++ .../wireless/marvell/mwifiex/pcie_quirks.c | 73 +++++++++++++++++-- .../wireless/marvell/mwifiex/pcie_quirks.h | 3 +- 3 files changed, 74 insertions(+), 9 deletions(-)