@@ -1158,6 +1158,7 @@ static int wcn36xx_resume(struct ieee80211_hw *hw)
if (!vif_priv->sta_assoc)
goto out;
+ wcn36xx_smd_host_resume(wcn);
wcn36xx_smd_set_power_params(wcn, false);
wcn36xx_smd_gtk_offload_get_info(wcn, vif);
wcn36xx_smd_gtk_offload(wcn, vif, false);
@@ -2989,6 +2989,40 @@ int wcn36xx_smd_wlan_host_suspend_ind(struct wcn36xx *wcn)
return ret;
}
+int wcn36xx_smd_host_resume(struct wcn36xx *wcn)
+{
+ struct wcn36xx_hal_wlan_host_resume_req_msg msg_body;
+ struct wcn36xx_hal_host_resume_rsp_msg *rsp;
+ int ret;
+
+ mutex_lock(&wcn->hal_mutex);
+
+ INIT_HAL_MSG(msg_body, WCN36XX_HAL_HOST_RESUME_REQ);
+ msg_body.configured_mcst_bcst_filter_setting = 0;
+
+ PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
+
+ ret = wcn36xx_smd_send_and_wait(wcn, msg_body.header.len);
+ if (ret) {
+ wcn36xx_err("Sending wlan_host_resume failed\n");
+ goto out;
+ }
+ ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len);
+ if (ret) {
+ wcn36xx_err("wlan_host_resume err=%d\n", ret);
+ goto out;
+ }
+
+ rsp = (struct wcn36xx_hal_host_resume_rsp_msg *)wcn->hal_buf;
+ if (rsp->status)
+ wcn36xx_warn("wlan_host_resume status=%d\n", rsp->status);
+
+out:
+ mutex_unlock(&wcn->hal_mutex);
+
+ return ret;
+}
+
int wcn36xx_smd_rsp_process(struct rpmsg_device *rpdev,
void *buf, int len, void *priv, u32 addr)
{
@@ -3040,6 +3074,7 @@ int wcn36xx_smd_rsp_process(struct rpmsg_device *rpdev,
case WCN36XX_HAL_HOST_OFFLOAD_RSP:
case WCN36XX_HAL_GTK_OFFLOAD_RSP:
case WCN36XX_HAL_GTK_OFFLOAD_GETINFO_RSP:
+ case WCN36XX_HAL_HOST_RESUME_RSP:
memcpy(wcn->hal_buf, buf, len);
wcn->hal_rsp_len = len;
complete(&wcn->hal_rsp_compl);
@@ -163,4 +163,6 @@ bool wcn36xx_smd_is_scanning(struct wcn36xx *wcn);
int wcn36xx_smd_wlan_host_suspend_ind(struct wcn36xx *wcn);
+int wcn36xx_smd_host_resume(struct wcn36xx *wcn);
+
#endif /* _SMD_H_ */
This commit is the corresponding resume() path request to the firmware when resuming. Unlike the suspend() version which is a unidirectional indication, the resume version is a standard request/response. Once the resume() request completes ipv4 ARP, ipv6 NS and GTK rekey offload stop working and can subsequently be rolled back. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- drivers/net/wireless/ath/wcn36xx/main.c | 1 + drivers/net/wireless/ath/wcn36xx/smd.c | 35 +++++++++++++++++++++++++ drivers/net/wireless/ath/wcn36xx/smd.h | 2 ++ 3 files changed, 38 insertions(+)