@@ -79,13 +79,12 @@ static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb)
{
struct sk_buff *nskb;
- nskb = skb_clone(skb, GFP_ATOMIC);
+ nskb = skb_clone_sk_optional(skb);
if (unlikely(!nskb)) {
kfree_skb(skb);
return NULL;
}
- can_skb_set_owner(nskb, skb->sk);
consume_skb(skb);
return nskb;
}
@@ -251,20 +251,20 @@ int can_send(struct sk_buff *skb, int loop)
* its own. Example: can_raw sockopt CAN_RAW_RECV_OWN_MSGS
* Therefore we have to ensure that skb->sk remains the
* reference to the originating sock by restoring skb->sk
- * after each skb_clone() or skb_orphan() usage.
+ * after each skb_clone() or skb_orphan() usage -
+ * skb_clone_sk_optional() takes care of that.
*/
if (!(skb->dev->flags & IFF_ECHO)) {
/* If the interface is not capable to do loopback
* itself, we do it here.
*/
- newskb = skb_clone(skb, GFP_ATOMIC);
+ newskb = skb_clone_sk_optional(skb);
if (!newskb) {
kfree_skb(skb);
return -ENOMEM;
}
- can_skb_set_owner(newskb, skb->sk);
newskb->ip_summed = CHECKSUM_UNNECESSARY;
newskb->pkt_type = PACKET_BROADCAST;
}
@@ -47,12 +47,11 @@ static void j1939_can_recv(struct sk_buff *iskb, void *data)
* the header goes into sockaddr.
* j1939 may not touch the incoming skb in such way
*/
- skb = skb_clone(iskb, GFP_ATOMIC);
+ skb = skb_clone_sk_optional(iskb);
if (!skb)
return;
j1939_priv_get(priv);
- can_skb_set_owner(skb, iskb->sk);
/* get a pointer to the header of the skb
* the skb payload (pointer) is moved, so that the next skb_data
@@ -305,12 +305,11 @@ static void j1939_sk_recv_one(struct j1939_sock *jsk, struct sk_buff *oskb)
if (!j1939_sk_recv_match_one(jsk, oskcb))
return;
- skb = skb_clone(oskb, GFP_ATOMIC);
+ skb = skb_clone_sk_optional(oskb);
if (!skb) {
pr_warn("skb clone failed\n");
return;
}
- can_skb_set_owner(skb, oskb->sk);
skcb = j1939_skb_to_cb(skb);
skcb->msg_flags &= ~(MSG_DONTROUTE);
@@ -1014,12 +1014,10 @@ static int j1939_simple_txnext(struct j1939_session *session)
if (!se_skb)
return 0;
- skb = skb_clone(se_skb, GFP_ATOMIC);
+ skb = skb_clone_sk_optional(se_skb);
if (!skb)
return -ENOMEM;
- can_skb_set_owner(skb, se_skb->sk);
-
j1939_tp_set_rxtimeout(session, J1939_SIMPLE_ECHO_TIMEOUT_MS);
ret = j1939_send_one(priv, skb);
There are two ref count variables controlling the free()ing of a socket: - struct sock::sk_refcnt - which is changed by sock_hold()/sock_put() - struct sock::sk_wmem_alloc - which accounts the memory allocated by the skbs in the send path. If the socket is closed the struct sock::sk_refcnt will finally reach 0 and sk_free() is called. Which then calls refcount_dec_and_test(&sk->sk_wmem_alloc). If sk_wmem_alloc reaches 0 the socket is actually free()ed. In case there are still TX skbs on the fly and the socket() is closed, the struct sock::sk_refcnt reaches 0. In the TX-path the CAN stack clones an "echo" skb, calls sock_hold() on the original socket and references it. This produces the following back trace: | WARNING: CPU: 0 PID: 280 at lib/refcount.c:25 refcount_warn_saturate+0x114/0x134 | refcount_t: addition on 0; use-after-free. | Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E) imx_vdoa(E) | CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E 5.11.0-04577-gf8ff6603c617 #203 | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) | Backtrace: | [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24) r7:00000000 r6:600f0113 r5:00000000 r4:81441220 | [<80bb0260>] (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8) | [<80bb589c>] (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019 r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90 | [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8) r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019 r4:80f4a8c2 | [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>] (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000 r6:82b44000 r5:834e5600 r4:83f4d540 | [<80528e7c>] (refcount_warn_saturate) from [<8079a4c8>] (__refcount_add.constprop.0+0x4c/0x50) | [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>] (can_put_echo_skb+0xb0/0x13c) | [<8079a4cc>] (can_put_echo_skb) from [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610 r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600 | [<8079b8d4>] (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70) r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000 r4:82ab1f00 | [<80969034>] (netdev_start_xmit) from [<809725a4>] (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00 r6:82b44000 r5:00000000 r4:834e5600 | [<80972408>] (dev_hard_start_xmit) from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600 r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600 r4:83f27400 | [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>] (__qdisc_run+0x4f0/0x534) To fix this problem, we have to take into account, that the socket technically still there but should not used (by any new skbs) any more. The function skb_clone_sk_optional() (introduced in the previous patch) takes care of this. It will only clone the skb, if the sk is set and the refcount has not reached 0. Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Fixes: 0ae89beb283a ("can: add destructor for self generated skbs") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- include/linux/can/skb.h | 3 +-- net/can/af_can.c | 6 +++--- net/can/j1939/main.c | 3 +-- net/can/j1939/socket.c | 3 +-- net/can/j1939/transport.c | 4 +--- 5 files changed, 7 insertions(+), 12 deletions(-)