diff mbox series

wilc1000: Support chip sleep over SPI

Message ID 20210224033317.1507603-1-davidm@egauge.net (mailing list archive)
State Accepted
Commit f135a1571a0579bebed625e3af0b1fcae6dff7c5
Delegated to: Kalle Valo
Headers show
Series wilc1000: Support chip sleep over SPI | expand

Commit Message

David Mosberger-Tang Feb. 24, 2021, 3:33 a.m. UTC
chip_allow_sleep() only supported wakeup via SDIO, which made the
driver unusable over SPI.  This code is a straight forward port from
the driver in the linux-at91 repository.

Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
---
 .../net/wireless/microchip/wilc1000/wlan.c    | 56 +++++++++++++++++--
 .../net/wireless/microchip/wilc1000/wlan.h    |  6 ++
 2 files changed, 58 insertions(+), 4 deletions(-)

Comments

Ajay Singh Feb. 24, 2021, 9:51 a.m. UTC | #1
On 24/02/21 9:03 am, David Mosberger-Tang wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> chip_allow_sleep() only supported wakeup via SDIO, which made the
> driver unusable over SPI.  This code is a straight forward port from
> the driver in the linux-at91 repository.
> 

Thanks David. The patch looks good to me.

Acked-by: Ajay Singh <ajay.kathat@microchip.com>

I will work on the wakeup sequence patch and try to submit it soon.

> Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
> ---
>  .../net/wireless/microchip/wilc1000/wlan.c    | 56 +++++++++++++++++--
>  .../net/wireless/microchip/wilc1000/wlan.h    |  6 ++
>  2 files changed, 58 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
> index 31d51385ba93..d4a90c490084 100644
> --- a/drivers/net/wireless/microchip/wilc1000/wlan.c
> +++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
> @@ -552,12 +552,60 @@ static struct rxq_entry_t *wilc_wlan_rxq_remove(struct wilc *wilc)
>  void chip_allow_sleep(struct wilc *wilc)
>  {
>         u32 reg = 0;
> +       const struct wilc_hif_func *hif_func = wilc->hif_func;
> +       u32 wakeup_reg, wakeup_bit;
> +       u32 to_host_from_fw_reg, to_host_from_fw_bit;
> +       u32 from_host_to_fw_reg, from_host_to_fw_bit;
> +       u32 trials = 100;
> +       int ret;
> +
> +       if (wilc->io_type == WILC_HIF_SDIO) {
> +               wakeup_reg = WILC_SDIO_WAKEUP_REG;
> +               wakeup_bit = WILC_SDIO_WAKEUP_BIT;
> +               from_host_to_fw_reg = WILC_SDIO_HOST_TO_FW_REG;
> +               from_host_to_fw_bit = WILC_SDIO_HOST_TO_FW_BIT;
> +               to_host_from_fw_reg = WILC_SDIO_FW_TO_HOST_REG;
> +               to_host_from_fw_bit = WILC_SDIO_FW_TO_HOST_BIT;
> +       } else {
> +               wakeup_reg = WILC_SPI_WAKEUP_REG;
> +               wakeup_bit = WILC_SPI_WAKEUP_BIT;
> +               from_host_to_fw_reg = WILC_SPI_HOST_TO_FW_REG;
> +               from_host_to_fw_bit = WILC_SPI_HOST_TO_FW_BIT;
> +               to_host_from_fw_reg = WILC_SPI_FW_TO_HOST_REG;
> +               to_host_from_fw_bit = WILC_SPI_FW_TO_HOST_BIT;
> +       }
> +
> +       while (trials--) {
> +               ret = hif_func->hif_read_reg(wilc, to_host_from_fw_reg, &reg);
> +               if (ret)
> +                       return;
> +               if ((reg & to_host_from_fw_bit) == 0)
> +                       break;
> +       }
> +       if (!trials)
> +               pr_warn("FW not responding\n");
> 
> -       wilc->hif_func->hif_read_reg(wilc, WILC_SDIO_WAKEUP_REG, &reg);
> +       /* Clear bit 1 */
> +       ret = hif_func->hif_read_reg(wilc, wakeup_reg, &reg);
> +       if (ret)
> +               return;
> +       if (reg & wakeup_bit) {
> +               reg &= ~wakeup_bit;
> +               ret = hif_func->hif_write_reg(wilc, wakeup_reg, reg);
> +               if (ret)
> +                       return;
> +       }
> 
> -       wilc->hif_func->hif_write_reg(wilc, WILC_SDIO_WAKEUP_REG,
> -                                     reg & ~WILC_SDIO_WAKEUP_BIT);
> -       wilc->hif_func->hif_write_reg(wilc, WILC_SDIO_HOST_TO_FW_REG, 0);
> +       ret = hif_func->hif_read_reg(wilc, from_host_to_fw_reg, &reg);
> +       if (ret)
> +               return;
> +       if (reg & from_host_to_fw_bit) {
> +               reg &= ~from_host_to_fw_bit;
> +               ret = hif_func->hif_write_reg(wilc, from_host_to_fw_reg, reg);
> +               if (ret)
> +                       return;
> +
> +       }
>  }
>  EXPORT_SYMBOL_GPL(chip_allow_sleep);
> 
> diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
> index d55eb6b3a12a..6479acc12b95 100644
> --- a/drivers/net/wireless/microchip/wilc1000/wlan.h
> +++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
> @@ -97,6 +97,12 @@
>  #define WILC_SPI_WAKEUP_REG            0x1
>  #define WILC_SPI_WAKEUP_BIT            BIT(1)
> 
> +#define WILC_SPI_HOST_TO_FW_REG                0x0b
> +#define WILC_SPI_HOST_TO_FW_BIT                BIT(0)
> +
> +#define WILC_SPI_FW_TO_HOST_REG                0x10
> +#define WILC_SPI_FW_TO_HOST_BIT                BIT(0)
> +
>  #define WILC_SPI_PROTOCOL_OFFSET       (WILC_SPI_PROTOCOL_CONFIG - \
>                                          WILC_SPI_REG_BASE)
> 
> --
> 2.25.1
>
Kalle Valo March 15, 2021, 8:24 a.m. UTC | #2
David Mosberger-Tang <davidm@egauge.net> wrote:

> chip_allow_sleep() only supported wakeup via SDIO, which made the
> driver unusable over SPI.  This code is a straight forward port from
> the driver in the linux-at91 repository.
> 
> Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
> Acked-by: Ajay Singh <ajay.kathat@microchip.com>

Patch applied to wireless-drivers-next.git, thanks.

f135a1571a05 wilc1000: Support chip sleep over SPI
diff mbox series

Patch

diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 31d51385ba93..d4a90c490084 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -552,12 +552,60 @@  static struct rxq_entry_t *wilc_wlan_rxq_remove(struct wilc *wilc)
 void chip_allow_sleep(struct wilc *wilc)
 {
 	u32 reg = 0;
+	const struct wilc_hif_func *hif_func = wilc->hif_func;
+	u32 wakeup_reg, wakeup_bit;
+	u32 to_host_from_fw_reg, to_host_from_fw_bit;
+	u32 from_host_to_fw_reg, from_host_to_fw_bit;
+	u32 trials = 100;
+	int ret;
+
+	if (wilc->io_type == WILC_HIF_SDIO) {
+		wakeup_reg = WILC_SDIO_WAKEUP_REG;
+		wakeup_bit = WILC_SDIO_WAKEUP_BIT;
+		from_host_to_fw_reg = WILC_SDIO_HOST_TO_FW_REG;
+		from_host_to_fw_bit = WILC_SDIO_HOST_TO_FW_BIT;
+		to_host_from_fw_reg = WILC_SDIO_FW_TO_HOST_REG;
+		to_host_from_fw_bit = WILC_SDIO_FW_TO_HOST_BIT;
+	} else {
+		wakeup_reg = WILC_SPI_WAKEUP_REG;
+		wakeup_bit = WILC_SPI_WAKEUP_BIT;
+		from_host_to_fw_reg = WILC_SPI_HOST_TO_FW_REG;
+		from_host_to_fw_bit = WILC_SPI_HOST_TO_FW_BIT;
+		to_host_from_fw_reg = WILC_SPI_FW_TO_HOST_REG;
+		to_host_from_fw_bit = WILC_SPI_FW_TO_HOST_BIT;
+	}
+
+	while (trials--) {
+		ret = hif_func->hif_read_reg(wilc, to_host_from_fw_reg, &reg);
+		if (ret)
+			return;
+		if ((reg & to_host_from_fw_bit) == 0)
+			break;
+	}
+	if (!trials)
+		pr_warn("FW not responding\n");
 
-	wilc->hif_func->hif_read_reg(wilc, WILC_SDIO_WAKEUP_REG, &reg);
+	/* Clear bit 1 */
+	ret = hif_func->hif_read_reg(wilc, wakeup_reg, &reg);
+	if (ret)
+		return;
+	if (reg & wakeup_bit) {
+		reg &= ~wakeup_bit;
+		ret = hif_func->hif_write_reg(wilc, wakeup_reg, reg);
+		if (ret)
+			return;
+	}
 
-	wilc->hif_func->hif_write_reg(wilc, WILC_SDIO_WAKEUP_REG,
-				      reg & ~WILC_SDIO_WAKEUP_BIT);
-	wilc->hif_func->hif_write_reg(wilc, WILC_SDIO_HOST_TO_FW_REG, 0);
+	ret = hif_func->hif_read_reg(wilc, from_host_to_fw_reg, &reg);
+	if (ret)
+		return;
+	if (reg & from_host_to_fw_bit) {
+		reg &= ~from_host_to_fw_bit;
+		ret = hif_func->hif_write_reg(wilc, from_host_to_fw_reg, reg);
+		if (ret)
+			return;
+
+	}
 }
 EXPORT_SYMBOL_GPL(chip_allow_sleep);
 
diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h
index d55eb6b3a12a..6479acc12b95 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.h
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.h
@@ -97,6 +97,12 @@ 
 #define WILC_SPI_WAKEUP_REG		0x1
 #define WILC_SPI_WAKEUP_BIT		BIT(1)
 
+#define WILC_SPI_HOST_TO_FW_REG		0x0b
+#define WILC_SPI_HOST_TO_FW_BIT		BIT(0)
+
+#define WILC_SPI_FW_TO_HOST_REG		0x10
+#define WILC_SPI_FW_TO_HOST_BIT		BIT(0)
+
 #define WILC_SPI_PROTOCOL_OFFSET	(WILC_SPI_PROTOCOL_CONFIG - \
 					 WILC_SPI_REG_BASE)