diff mbox series

[v3,05/12] wcn36xx: Add ipv6 address tracking

Message ID 20210319161520.3590510-6-bryan.odonoghue@linaro.org (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series wcn36xx: Enable downstream consistent Wake on Lan | expand

Commit Message

Bryan O'Donoghue March 19, 2021, 4:15 p.m. UTC
Taking code from iwlwifi this commit adds a standard callback for
ipv6_addr_change().

This callback allows wcn36xx to know the set of ipv6 addresses. Something
we need to know in order to get wowlan working with ipv6.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/hal.h     |  1 +
 drivers/net/wireless/ath/wcn36xx/main.c    | 32 ++++++++++++++++++++++
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h |  8 ++++++
 3 files changed, 41 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index b56c8292fa62..90333daed845 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -3466,6 +3466,7 @@  struct wcn36xx_hal_rem_bcn_filter_req {
 #define WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE             0x2
 #define WCN36XX_HAL_OFFLOAD_ARP_AND_BCAST_FILTER_ENABLE	\
 	(WCN36XX_HAL_OFFLOAD_ENABLE | WCN36XX_HAL_OFFLOAD_BCAST_FILTER_ENABLE)
+#define WCN36XX_HAL_IPV6_OFFLOAD_ADDR_MAX		0x02
 
 struct wcn36xx_hal_ns_offload_params {
 	u8 src_ipv6_addr[WCN36XX_HAL_IPV6_ADDR_LEN];
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 029c9952b4fb..93eff6563187 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -25,6 +25,7 @@ 
 #include <linux/rpmsg.h>
 #include <linux/soc/qcom/smem_state.h>
 #include <linux/soc/qcom/wcnss_ctrl.h>
+#include <net/ipv6.h>
 #include "wcn36xx.h"
 #include "testmode.h"
 
@@ -1216,6 +1217,34 @@  static int wcn36xx_ampdu_action(struct ieee80211_hw *hw,
 	return ret;
 }
 
+#if IS_ENABLED(CONFIG_IPV6)
+void wcn36xx_ipv6_addr_change(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
+			      struct inet6_dev *idev)
+{
+	struct wcn36xx_vif *vif_priv = wcn36xx_vif_to_priv(vif);
+	struct inet6_ifaddr *ifa;
+	int idx = 0;
+
+	memset(vif_priv->tentative_addrs, 0, sizeof(vif_priv->tentative_addrs));
+
+	read_lock_bh(&idev->lock);
+	list_for_each_entry(ifa, &idev->addr_list, if_list) {
+		vif_priv->target_ipv6_addrs[idx] = ifa->addr;
+		if (ifa->flags & IFA_F_TENTATIVE)
+			__set_bit(idx, vif_priv->tentative_addrs);
+		idx++;
+		if (idx >= WCN36XX_HAL_IPV6_OFFLOAD_ADDR_MAX)
+			break;
+		wcn36xx_dbg(WCN36XX_DBG_MAC, "%pI6 %s\n", &ifa->addr,
+			    (ifa->flags & IFA_F_TENTATIVE) ? "tentative" : NULL);
+	}
+	read_unlock_bh(&idev->lock);
+
+	vif_priv->num_target_ipv6_addrs = idx;
+}
+#endif
+
 static const struct ieee80211_ops wcn36xx_ops = {
 	.start			= wcn36xx_start,
 	.stop			= wcn36xx_stop,
@@ -1239,6 +1268,9 @@  static const struct ieee80211_ops wcn36xx_ops = {
 	.sta_add		= wcn36xx_sta_add,
 	.sta_remove		= wcn36xx_sta_remove,
 	.ampdu_action		= wcn36xx_ampdu_action,
+#if IS_ENABLED(CONFIG_IPV6)
+	.ipv6_addr_change	= wcn36xx_ipv6_addr_change,
+#endif
 
 	CFG80211_TESTMODE_CMD(wcn36xx_tm_cmd)
 };
diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 71fa9992b118..5a5114660b18 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -18,6 +18,7 @@ 
 #define _WCN36XX_H_
 
 #include <linux/completion.h>
+#include <linux/in6.h>
 #include <linux/printk.h>
 #include <linux/spinlock.h>
 #include <net/mac80211.h>
@@ -136,6 +137,13 @@  struct wcn36xx_vif {
 	u8 self_dpu_desc_index;
 	u8 self_ucast_dpu_sign;
 
+#if IS_ENABLED(CONFIG_IPV6)
+	/* IPv6 addresses for WoWLAN */
+	struct in6_addr target_ipv6_addrs[WCN36XX_HAL_IPV6_OFFLOAD_ADDR_MAX];
+	unsigned long tentative_addrs[BITS_TO_LONGS(WCN36XX_HAL_IPV6_OFFLOAD_ADDR_MAX)];
+	int num_target_ipv6_addrs;
+#endif
+
 	struct list_head sta_list;
 };