@@ -18,6 +18,7 @@ Contents:
qlogic/index
wan/index
wifi/index
+ wwan/index
.. only:: subproject and html
new file mode 100644
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+WWAN Device Drivers
+===================
+
+Contents:
+
+.. toctree::
+ :maxdepth: 2
+
+ iosm
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
new file mode 100755
@@ -0,0 +1,95 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+.. Copyright (C) 2020-21 Intel Corporation
+
+.. _iosm_driver_doc:
+
+===========================================
+IOSM Driver for Intel M.2 PCIe based Modems
+===========================================
+The IOSM (IPC over Shared Memory) driver is a WWAN PCIe host driver developed
+for linux or chrome platform for data exchange over PCIe interface between
+Host platform & Intel M.2 Modem. The driver exposes interface conforming to the
+MBIM protocol [1]. Any front end application ( eg: Modem Manager) could easily
+manage the MBIM interface to enable data communication towards WWAN.
+
+Basic usage
+===========
+MBIM functions are inactive when unmanaged. The IOSM driver only provides a
+userspace interface MBIM "WWAN PORT" representing MBIM control channel and does
+not play any role in managing the functionality. It is the job of a userspace
+application to detect port enumeration and enable MBIM functionality.
+
+Examples of few such userspace application are:
+- mbimcli (included with the libmbim [2] library), and
+- Modem Manager [3]
+
+Management Applications to carry out below required actions for establishing
+MBIM IP session:
+- open the MBIM control channel
+- configure network connection settings
+- connect to network
+- configure IP network interface
+
+Management application development
+==================================
+The driver and userspace interfaces are described below. The MBIM protocol is
+described in [1] Mobile Broadband Interface Model v1.0 Errata-1.
+
+MBIM control channel userspace ABI
+----------------------------------
+
+/dev/wwan0p3MBIM character device
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver exposes an MBIM interface to the MBIM function by implementing
+MBIM WWAN Port. The userspace end of the control channel pipe is a
+/dev/wwan0p3MBIM character device. Application shall use this interface for
+MBIM protocol communication.
+
+Fragmentation
+~~~~~~~~~~~~~
+The userspace application is responsible for all control message fragmentation
+and defragmentation as per MBIM specification.
+
+/dev/wwan0p3MBIM write()
+~~~~~~~~~~~~~~~~~~~~~
+The MBIM control messages from the management application must not exceed the
+negotiated control message size.
+
+/dev/wwan0p3MBIM read()
+~~~~~~~~~~~~~~~~~~~~
+The management application must accept control messages of up the negotiated
+control message size.
+
+MBIM data channel userspace ABI
+-------------------------------
+
+inmX network device
+~~~~~~~~~~~~~~~~~~~~
+The IOSM driver exposes IP link interface "inmX" of type "IOSM" for IP traffic.
+Iproute network utility is used for creating "inmX" network interface and for
+associating it with MBIM IP session. The Driver supports upto 8 IP sessions for
+simultaneous IP communication.
+
+The userspace management application is responsible for creating new IP link
+prior to establishing MBIM IP session where the SessionId is greater than 0.
+
+For example, creating new IP link for a MBIM IP session with SessionId 1:
+
+ ip link add link wwan0 name inm1 type IOSM if_id 1
+
+The driver will automatically map the "inm1" network device to MBIM IP session 1.
+
+References
+==========
+[1] "MBIM (Mobile Broadband Interface Model) Errata-1"
+ - https://www.usb.org/document-library/
+
+[2] libmbim - "a glib-based library for talking to WWAN modems and
+ devices which speak the Mobile Interface Broadband Model (MBIM)
+ protocol"
+ - http://www.freedesktop.org/wiki/Software/libmbim/
+
+[3] Modem Manager - "a DBus-activated daemon which controls mobile
+ broadband (2G/3G/4G) devices and connections"
+ - http://www.freedesktop.org/wiki/Software/ModemManager/
@@ -9443,6 +9443,13 @@ L: Dell.Client.Kernel@dell.com
S: Maintained
F: drivers/platform/x86/intel-wmi-thunderbolt.c
+INTEL WWAN IOSM DRIVER
+M: M Chetan Kumar <m.chetan.kumar@intel.com>
+M: Intel Corporation <linuxwwan@intel.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/wwan/iosm/
+
INTEL(R) TRACE HUB
M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
S: Supported
@@ -34,4 +34,16 @@ config MHI_WWAN_CTRL
To compile this driver as a module, choose M here: the module will be
called mhi_wwan_ctrl.
+config IOSM
+ tristate "IOSM Driver for Intel M.2 WWAN Device"
+ select WWAN_CORE
+ depends on INTEL_IOMMU
+ help
+ This driver enables Intel M.2 WWAN Device communication.
+
+ If you have one of those Intel M.2 WWAN Modules and wish to use it in
+ Linux say Y/M here.
+
+ If unsure, say N.
+
endif # WWAN
@@ -7,3 +7,4 @@ obj-$(CONFIG_WWAN_CORE) += wwan.o
wwan-objs += wwan_core.o
obj-$(CONFIG_MHI_WWAN_CTRL) += mhi_wwan_ctrl.o
+obj-$(CONFIG_IOSM) += iosm/
new file mode 100644
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: (GPL-2.0-only)
+#
+# Copyright (C) 2020-21 Intel Corporation.
+#
+
+iosm-y = \
+ iosm_ipc_task_queue.o \
+ iosm_ipc_imem.o \
+ iosm_ipc_imem_ops.o \
+ iosm_ipc_mmio.o \
+ iosm_ipc_port.o \
+ iosm_ipc_wwan.o \
+ iosm_ipc_uevent.o \
+ iosm_ipc_pm.o \
+ iosm_ipc_pcie.o \
+ iosm_ipc_irq.o \
+ iosm_ipc_chnl_cfg.o \
+ iosm_ipc_protocol.o \
+ iosm_ipc_protocol_ops.o \
+ iosm_ipc_mux.o \
+ iosm_ipc_mux_codec.o
+
+obj-$(CONFIG_IOSM) := iosm.o
+
+# compilation flags
+ccflags-y += -DDEBUG
@@ -1251,4 +1251,14 @@ struct ifla_rmnet_flags {
__u32 mask;
};
+/* IOSM Section */
+
+enum {
+ IFLA_IOSM_UNSPEC,
+ IFLA_IOSM_IF_ID,
+ __IFLA_IOSM_MAX,
+};
+
+#define IFLA_IOSM_MAX (__IFLA_IOSM_MAX - 1)
+
#endif /* _UAPI_LINUX_IF_LINK_H */
@@ -1046,4 +1046,14 @@ struct ifla_rmnet_flags {
__u32 mask;
};
+/* IOSM Section */
+
+enum {
+ IFLA_IOSM_UNSPEC,
+ IFLA_IOSM_IF_ID,
+ __IFLA_IOSM_MAX,
+};
+
+#define IFLA_IOSM_MAX (__IFLA_IOSM_MAX - 1)
+
#endif /* _UAPI_LINUX_IF_LINK_H */
1) Kconfig & Makefile changes for IOSM Driver compilation. 2) Add IOSM Driver documentation. 3) Modified if_link.h file to support link type iosm. 4) Modified MAINTAINER file for IOSM Driver addition. Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com> --- v3: * Clean-up driver/net Kconfig & Makefile (Changes available as part of wwan subsystem). * Removed NET dependency key word from iosm Kconfig. * Removed IOCTL section from documentation. v2: * Moved driver documentation to RsT file. * Modified if_link.h file to support link type iosm. --- .../networking/device_drivers/index.rst | 1 + .../networking/device_drivers/wwan/index.rst | 18 ++++ .../networking/device_drivers/wwan/iosm.rst | 95 +++++++++++++++++++ MAINTAINERS | 7 ++ drivers/net/wwan/Kconfig | 12 +++ drivers/net/wwan/Makefile | 1 + drivers/net/wwan/iosm/Makefile | 26 +++++ include/uapi/linux/if_link.h | 10 ++ tools/include/uapi/linux/if_link.h | 10 ++ 9 files changed, 180 insertions(+) create mode 100644 Documentation/networking/device_drivers/wwan/index.rst create mode 100755 Documentation/networking/device_drivers/wwan/iosm.rst create mode 100644 drivers/net/wwan/iosm/Makefile