@@ -5638,7 +5638,8 @@ static int ath11k_mac_op_add_interface(struct ieee80211_hw *hw,
goto err_peer_del;
}
- ret = ath11k_wmi_pdev_set_ps_mode(ar, arvif->vdev_id, false);
+ ret = ath11k_wmi_pdev_set_ps_mode(ar, arvif->vdev_id,
+ WMI_STA_PS_MODE_DISABLED);
if (ret) {
ath11k_warn(ar->ab, "failed to disable vdev %d ps mode: %d\n",
arvif->vdev_id, ret);
@@ -1244,7 +1244,8 @@ int ath11k_wmi_pdev_set_param(struct ath11k *ar, u32 param_id,
return ret;
}
-int ath11k_wmi_pdev_set_ps_mode(struct ath11k *ar, int vdev_id, u32 enable)
+int ath11k_wmi_pdev_set_ps_mode(struct ath11k *ar, int vdev_id,
+ enum wmi_sta_ps_mode psmode)
{
struct ath11k_pdev_wmi *wmi = ar->wmi;
struct wmi_pdev_set_ps_mode_cmd *cmd;
@@ -1259,7 +1260,7 @@ int ath11k_wmi_pdev_set_ps_mode(struct ath11k *ar, int vdev_id, u32 enable)
cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_STA_POWERSAVE_MODE_CMD) |
FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
cmd->vdev_id = vdev_id;
- cmd->sta_ps_mode = enable;
+ cmd->sta_ps_mode = psmode;
ret = ath11k_wmi_cmd_send(wmi, skb, WMI_STA_POWERSAVE_MODE_CMDID);
if (ret) {
@@ -1269,7 +1270,7 @@ int ath11k_wmi_pdev_set_ps_mode(struct ath11k *ar, int vdev_id, u32 enable)
ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
"WMI vdev set psmode %d vdev id %d\n",
- enable, vdev_id);
+ psmode, vdev_id);
return ret;
}
@@ -5351,7 +5351,8 @@ int ath11k_wmi_set_peer_param(struct ath11k *ar, const u8 *peer_addr,
u32 vdev_id, u32 param_id, u32 param_val);
int ath11k_wmi_pdev_set_param(struct ath11k *ar, u32 param_id,
u32 param_value, u8 pdev_id);
-int ath11k_wmi_pdev_set_ps_mode(struct ath11k *ar, int vdev_id, u32 enable);
+int ath11k_wmi_pdev_set_ps_mode(struct ath11k *ar, int vdev_id,
+ enum wmi_sta_ps_mode psmode);
int ath11k_wmi_wait_for_unified_ready(struct ath11k_base *ab);
int ath11k_wmi_cmd_init(struct ath11k_base *ab);
int ath11k_wmi_wait_for_service_ready(struct ath11k_base *ab);
It's more descriptive to use the actual enum used by the firmware instead of a boolean so change ath11k_wmi_pdev_set_ps_mode() to use a boolean. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <kvalo@codeaurora.org> --- v2: * new patch drivers/net/wireless/ath/ath11k/mac.c | 3 ++- drivers/net/wireless/ath/ath11k/wmi.c | 7 ++++--- drivers/net/wireless/ath/ath11k/wmi.h | 3 ++- 3 files changed, 8 insertions(+), 5 deletions(-) base-commit: 042696e7d5cff4bf705caa191ea458352bcc07f3