@@ -769,12 +769,50 @@ void brcmf_set_mpc(struct brcmf_if *ifp, int mpc)
}
}
+static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg,
+ struct brcmf_scan_params_v2_le *params_le,
+ struct cfg80211_scan_request *request);
+
+static void brcmf_scan_params_v2_to_v1(struct brcmf_scan_params_v2_le *params_v2_le,
+ struct brcmf_scan_params_le *params_le)
+{
+ size_t params_size;
+ u32 ch;
+ int n_channels, n_ssids;
+
+ memcpy(¶ms_le->ssid_le, ¶ms_v2_le->ssid_le,
+ sizeof(params_le->ssid_le));
+ memcpy(¶ms_le->bssid, ¶ms_v2_le->bssid,
+ sizeof(params_le->bssid));
+
+ params_le->bss_type = params_v2_le->bss_type;
+ params_le->scan_type = params_v2_le->scan_type;
+ params_le->nprobes = params_v2_le->nprobes;
+ params_le->active_time = params_v2_le->active_time;
+ params_le->passive_time = params_v2_le->passive_time;
+ params_le->home_time = params_v2_le->home_time;
+ params_le->channel_num = params_v2_le->channel_num;
+
+ ch = le32_to_cpu(params_v2_le->channel_num);
+ n_channels = ch & BRCMF_SCAN_PARAMS_COUNT_MASK;
+ n_ssids = ch >> BRCMF_SCAN_PARAMS_NSSID_SHIFT;
+
+ params_size = sizeof(u16) * n_channels;
+ if (n_ssids > 0) {
+ params_size = roundup(params_size, sizeof(u32));
+ params_size += sizeof(struct brcmf_ssid_le) * n_ssids;
+ }
+
+ memcpy(¶ms_le->channel_list[0],
+ ¶ms_v2_le->channel_list[0], params_size);
+}
+
s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg,
struct brcmf_if *ifp, bool aborted,
bool fw_abort)
{
struct brcmf_pub *drvr = cfg->pub;
- struct brcmf_scan_params_le params_le;
+ struct brcmf_scan_params_v2_le params_v2_le;
struct cfg80211_scan_request *scan_request;
u64 reqid;
u32 bucket;
@@ -793,20 +831,23 @@ s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg,
if (fw_abort) {
/* Do a scan abort to stop the driver's scan engine */
brcmf_dbg(SCAN, "ABORT scan in firmware\n");
- memset(¶ms_le, 0, sizeof(params_le));
- eth_broadcast_addr(params_le.bssid);
- params_le.bss_type = DOT11_BSSTYPE_ANY;
- params_le.scan_type = 0;
- params_le.channel_num = cpu_to_le32(1);
- params_le.nprobes = cpu_to_le32(1);
- params_le.active_time = cpu_to_le32(-1);
- params_le.passive_time = cpu_to_le32(-1);
- params_le.home_time = cpu_to_le32(-1);
- /* Scan is aborted by setting channel_list[0] to -1 */
- params_le.channel_list[0] = cpu_to_le16(-1);
+
+ brcmf_escan_prep(cfg, ¶ms_v2_le, NULL);
+
/* E-Scan (or anyother type) can be aborted by SCAN */
- err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN,
- ¶ms_le, sizeof(params_le));
+ if (brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SCAN_V2)) {
+ err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN,
+ ¶ms_v2_le,
+ sizeof(params_v2_le));
+ } else {
+ struct brcmf_scan_params_le params_le;
+
+ brcmf_scan_params_v2_to_v1(¶ms_v2_le, ¶ms_le);
+ err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN,
+ ¶ms_le,
+ sizeof(params_le));
+ }
+
if (err)
bphy_err(drvr, "Scan abort failed\n");
}
@@ -1026,7 +1067,7 @@ brcmf_cfg80211_change_iface(struct wiphy *wiphy, struct net_device *ndev,
}
static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg,
- struct brcmf_scan_params_le *params_le,
+ struct brcmf_scan_params_v2_le *params_le,
struct cfg80211_scan_request *request)
{
u32 n_ssids;
@@ -1035,9 +1076,14 @@ static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg,
s32 offset;
u16 chanspec;
char *ptr;
+ int length;
struct brcmf_ssid_le ssid_le;
eth_broadcast_addr(params_le->bssid);
+
+ length = BRCMF_SCAN_PARAMS_V2_FIXED_SIZE;
+
+ params_le->version = BRCMF_SCAN_PARAMS_VERSION_V2;
params_le->bss_type = DOT11_BSSTYPE_ANY;
params_le->scan_type = BRCMF_SCANTYPE_ACTIVE;
params_le->channel_num = 0;
@@ -1047,6 +1093,15 @@ static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg,
params_le->home_time = cpu_to_le32(-1);
memset(¶ms_le->ssid_le, 0, sizeof(params_le->ssid_le));
+ /* Scan abort */
+ if (!request) {
+ length += sizeof(u16);
+ params_le->channel_num = cpu_to_le32(1);
+ params_le->channel_list[0] = cpu_to_le16(-1);
+ params_le->length = cpu_to_le16(length);
+ return;
+ }
+
n_ssids = request->n_ssids;
n_channels = request->n_channels;
@@ -1054,6 +1109,7 @@ static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg,
brcmf_dbg(SCAN, "### List of channelspecs to scan ### %d\n",
n_channels);
if (n_channels > 0) {
+ length += roundup(sizeof(u16) * n_channels, sizeof(u32));
for (i = 0; i < n_channels; i++) {
chanspec = channel_to_chanspec(&cfg->d11inf,
request->channels[i]);
@@ -1064,12 +1120,14 @@ static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg,
} else {
brcmf_dbg(SCAN, "Scanning all channels\n");
}
+
/* Copy ssid array if applicable */
brcmf_dbg(SCAN, "### List of SSIDs to scan ### %d\n", n_ssids);
if (n_ssids > 0) {
- offset = offsetof(struct brcmf_scan_params_le, channel_list) +
+ offset = offsetof(struct brcmf_scan_params_v2_le, channel_list) +
n_channels * sizeof(u16);
offset = roundup(offset, sizeof(u32));
+ length += sizeof(ssid_le) * n_ssids,
ptr = (char *)params_le + offset;
for (i = 0; i < n_ssids; i++) {
memset(&ssid_le, 0, sizeof(ssid_le));
@@ -1089,6 +1147,7 @@ static void brcmf_escan_prep(struct brcmf_cfg80211_info *cfg,
brcmf_dbg(SCAN, "Performing passive scan\n");
params_le->scan_type = BRCMF_SCANTYPE_PASSIVE;
}
+ params_le->length = cpu_to_le16(length);
/* Adding mask to channel numbers */
params_le->channel_num =
cpu_to_le32((n_ssids << BRCMF_SCAN_PARAMS_NSSID_SHIFT) |
@@ -1100,8 +1159,8 @@ brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp,
struct cfg80211_scan_request *request)
{
struct brcmf_pub *drvr = cfg->pub;
- s32 params_size = BRCMF_SCAN_PARAMS_FIXED_SIZE +
- offsetof(struct brcmf_escan_params_le, params_le);
+ s32 params_size = BRCMF_SCAN_PARAMS_V2_FIXED_SIZE +
+ offsetof(struct brcmf_escan_params_le, params_v2_le);
struct brcmf_escan_params_le *params;
s32 err = 0;
@@ -1121,8 +1180,22 @@ brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct brcmf_if *ifp,
goto exit;
}
BUG_ON(params_size + sizeof("escan") >= BRCMF_DCMD_MEDLEN);
- brcmf_escan_prep(cfg, ¶ms->params_le, request);
- params->version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION);
+ brcmf_escan_prep(cfg, ¶ms->params_v2_le, request);
+
+ params->version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION_V2);
+
+ if (!brcmf_feat_is_enabled(ifp, BRCMF_FEAT_SCAN_V2)) {
+ struct brcmf_escan_params_le *params_v1;
+
+ params_size -= BRCMF_SCAN_PARAMS_V2_FIXED_SIZE;
+ params_size += BRCMF_SCAN_PARAMS_FIXED_SIZE;
+ params_v1 = kzalloc(params_size, GFP_KERNEL);
+ params_v1->version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION);
+ brcmf_scan_params_v2_to_v1(¶ms->params_v2_le, ¶ms_v1->params_le);
+ kfree(params);
+ params = params_v1;
+ }
+
params->action = cpu_to_le16(WL_ESCAN_ACTION_START);
params->sync_id = cpu_to_le16(0x1234);
@@ -287,6 +287,7 @@ void brcmf_feat_attach(struct brcmf_pub *drvr)
ifp->drvr->feat_flags |= BIT(BRCMF_FEAT_SCAN_RANDOM_MAC);
brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_FWSUP, "sup_wpa");
+ brcmf_feat_iovar_int_get(ifp, BRCMF_FEAT_SCAN_V2, "scan_ver");
if (drvr->settings->feature_disable) {
brcmf_dbg(INFO, "Features: 0x%02x, disable: 0x%02x\n",
@@ -29,6 +29,7 @@
* DOT11H: firmware supports 802.11h
* SAE: simultaneous authentication of equals
* FWAUTH: Firmware authenticator
+ * SCAN_V2: Version 2 scan params
*/
#define BRCMF_FEAT_LIST \
BRCMF_FEAT_DEF(MBSS) \
@@ -51,7 +52,8 @@
BRCMF_FEAT_DEF(MONITOR_FMT_HW_RX_HDR) \
BRCMF_FEAT_DEF(DOT11H) \
BRCMF_FEAT_DEF(SAE) \
- BRCMF_FEAT_DEF(FWAUTH)
+ BRCMF_FEAT_DEF(FWAUTH) \
+ BRCMF_FEAT_DEF(SCAN_V2)
/*
* Quirks:
@@ -48,6 +48,10 @@
/* size of brcmf_scan_params not including variable length array */
#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64
+#define BRCMF_SCAN_PARAMS_V2_FIXED_SIZE 72
+
+/* version of brcmf_scan_params structure */
+#define BRCMF_SCAN_PARAMS_VERSION_V2 2
/* masks for channel and ssid count */
#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
@@ -67,6 +71,7 @@
#define BRCMF_PRIMARY_KEY (1 << 1)
#define DOT11_BSSTYPE_ANY 2
#define BRCMF_ESCAN_REQ_VERSION 1
+#define BRCMF_ESCAN_REQ_VERSION_V2 2
#define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */
@@ -386,6 +391,45 @@ struct brcmf_scan_params_le {
__le16 channel_list[1]; /* list of chanspecs */
};
+struct brcmf_scan_params_v2_le {
+ __le16 version; /* structure version */
+ __le16 length; /* structure length */
+ struct brcmf_ssid_le ssid_le; /* default: {0, ""} */
+ u8 bssid[ETH_ALEN]; /* default: bcast */
+ s8 bss_type; /* default: any,
+ * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
+ */
+ u8 pad;
+ __le32 scan_type; /* flags, 0 use default */
+ __le32 nprobes; /* -1 use default, number of probes per channel */
+ __le32 active_time; /* -1 use default, dwell time per channel for
+ * active scanning
+ */
+ __le32 passive_time; /* -1 use default, dwell time per channel
+ * for passive scanning
+ */
+ __le32 home_time; /* -1 use default, dwell time for the
+ * home channel between channel scans
+ */
+ __le32 channel_num; /* count of channels and ssids that follow
+ *
+ * low half is count of channels in
+ * channel_list, 0 means default (use all
+ * available channels)
+ *
+ * high half is entries in struct brcmf_ssid
+ * array that follows channel_list, aligned for
+ * s32 (4 bytes) meaning an odd channel count
+ * implies a 2-byte pad between end of
+ * channel_list and first ssid
+ *
+ * if ssid count is zero, single ssid in the
+ * fixed parameter portion is assumed, otherwise
+ * ssid in the fixed portion is ignored
+ */
+ __le16 channel_list[1]; /* list of chanspecs */
+};
+
struct brcmf_scan_results {
u32 buflen;
u32 version;
@@ -397,7 +441,10 @@ struct brcmf_escan_params_le {
__le32 version;
__le16 action;
__le16 sync_id;
- struct brcmf_scan_params_le params_le;
+ union {
+ struct brcmf_scan_params_le params_le;
+ struct brcmf_scan_params_v2_le params_v2_le;
+ };
};
struct brcmf_escan_result_le {
This new API version is required for at least the BCM4387 firmware. Add support for it, with a fallback to the v1 API. Signed-off-by: Hector Martin <marcan@marcan.st> --- .../broadcom/brcm80211/brcmfmac/cfg80211.c | 113 ++++++++++++++---- .../broadcom/brcm80211/brcmfmac/feature.c | 1 + .../broadcom/brcm80211/brcmfmac/feature.h | 4 +- .../broadcom/brcm80211/brcmfmac/fwil_types.h | 49 +++++++- 4 files changed, 145 insertions(+), 22 deletions(-)