diff mbox series

[v3,2/2] rtl8xxxu: fill up txrate info for gen1 chips

Message ID 20220325035735.4745-3-chris.chiu@canonical.com (mailing list archive)
State Accepted
Commit bd917b3d28c9815e2c55b9ff16680fdc2ba28d68
Delegated to: Kalle Valo
Headers show
Series rtl8xxxu: Fill up more TX information | expand

Commit Message

Chris Chiu March 25, 2022, 3:57 a.m. UTC 
RTL8188CUS/RTL8192CU(gen1) don't support rate adatptive report hence
no real txrate info can be retrieved. The vendor driver reports the
highest rate in HT capabilities from the IEs to avoid empty txrate.
This commit initiates the txrate information with the highest supported
rate negotiated with AP. The gen2 chip keeps update the txrate from
the rate adaptive reports, and gen1 chips at least have non-NULL txrate
after associated.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
---

Changelog:
  v3:
   - Move the rtl8xxxu_legacy_ratetable[] and rtl8xxxu_desc_to_mcsrate()
     to the proper place instead of adding them
     
  v2:
   - Use the 'static const' for rtl8xxxu_legacy_ratetable[]


 .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 88 +++++++++++++------
 1 file changed, 59 insertions(+), 29 deletions(-)

Comments

Kalle Valo April 6, 2022, 11:28 a.m. UTC | #1 
Chris Chiu <chris.chiu@canonical.com> wrote:

> RTL8188CUS/RTL8192CU(gen1) don't support rate adaptive report hence
> no real txrate info can be retrieved. The vendor driver reports the
> highest rate in HT capabilities from the IEs to avoid empty txrate.
> This commit initiates the txrate information with the highest supported
> rate negotiated with AP. The gen2 chip keeps update the txrate from
> the rate adaptive reports, and gen1 chips at least have non-NULL txrate
> after associated.
> 
> Signed-off-by: Chris Chiu <chris.chiu@canonical.com>

You ignored Reto's comment in v2 about misspelling of adaptive, but I'll fix
that during commit.
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index d225a1257530..6d9b5cf01b11 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4473,6 +4473,35 @@  void rtl8xxxu_gen1_init_aggregation(struct rtl8xxxu_priv *priv)
 	priv->rx_buf_aggregation = 1;
 }
 
+static const struct ieee80211_rate rtl8xxxu_legacy_ratetable[] = {
+	{.bitrate = 10, .hw_value = 0x00,},
+	{.bitrate = 20, .hw_value = 0x01,},
+	{.bitrate = 55, .hw_value = 0x02,},
+	{.bitrate = 110, .hw_value = 0x03,},
+	{.bitrate = 60, .hw_value = 0x04,},
+	{.bitrate = 90, .hw_value = 0x05,},
+	{.bitrate = 120, .hw_value = 0x06,},
+	{.bitrate = 180, .hw_value = 0x07,},
+	{.bitrate = 240, .hw_value = 0x08,},
+	{.bitrate = 360, .hw_value = 0x09,},
+	{.bitrate = 480, .hw_value = 0x0a,},
+	{.bitrate = 540, .hw_value = 0x0b,},
+};
+
+static void rtl8xxxu_desc_to_mcsrate(u16 rate, u8 *mcs, u8 *nss)
+{
+	if (rate <= DESC_RATE_54M)
+		return;
+
+	if (rate >= DESC_RATE_MCS0 && rate <= DESC_RATE_MCS15) {
+		if (rate < DESC_RATE_MCS8)
+			*nss = 1;
+		else
+			*nss = 2;
+		*mcs = rate - DESC_RATE_MCS0;
+	}
+}
+
 static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg)
 {
 	struct ieee80211_hw *hw = priv->hw;
@@ -4534,9 +4563,12 @@  rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	struct rtl8xxxu_priv *priv = hw->priv;
 	struct device *dev = &priv->udev->dev;
 	struct ieee80211_sta *sta;
+	struct rtl8xxxu_ra_report *rarpt;
 	u32 val32;
 	u8 val8;
 
+	rarpt = &priv->ra_report;
+
 	if (changed & BSS_CHANGED_ASSOC) {
 		dev_dbg(dev, "Changed ASSOC: %i!\n", bss_conf->assoc);
 
@@ -4545,6 +4577,10 @@  rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		if (bss_conf->assoc) {
 			u32 ramask;
 			int sgi = 0;
+			u8 highest_rate;
+			u8 mcs = 0, nss = 0;
+			u32 bit_rate;
+
 
 			rcu_read_lock();
 			sta = ieee80211_find_sta(vif, bss_conf->bssid);
@@ -4569,6 +4605,29 @@  rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 				sgi = 1;
 			rcu_read_unlock();
 
+			highest_rate = fls(ramask) - 1;
+			if (highest_rate < DESC_RATE_MCS0) {
+				rarpt->txrate.legacy =
+				rtl8xxxu_legacy_ratetable[highest_rate].bitrate;
+			} else {
+				rtl8xxxu_desc_to_mcsrate(highest_rate,
+							 &mcs, &nss);
+				rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
+
+				rarpt->txrate.mcs = mcs;
+				rarpt->txrate.nss = nss;
+
+				if (sgi) {
+					rarpt->txrate.flags |=
+						RATE_INFO_FLAGS_SHORT_GI;
+				}
+
+				rarpt->txrate.bw |= RATE_INFO_BW_20;
+			}
+			bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
+			rarpt->bit_rate = bit_rate;
+			rarpt->desc_rate = highest_rate;
+
 			priv->vif = vif;
 			priv->rssi_level = RTL8XXXU_RATR_STA_INIT;
 
@@ -5419,35 +5478,6 @@  void rtl8723bu_handle_bt_info(struct rtl8xxxu_priv *priv)
 	}
 }
 
-static struct ieee80211_rate rtl8xxxu_legacy_ratetable[] = {
-	{.bitrate = 10, .hw_value = 0x00,},
-	{.bitrate = 20, .hw_value = 0x01,},
-	{.bitrate = 55, .hw_value = 0x02,},
-	{.bitrate = 110, .hw_value = 0x03,},
-	{.bitrate = 60, .hw_value = 0x04,},
-	{.bitrate = 90, .hw_value = 0x05,},
-	{.bitrate = 120, .hw_value = 0x06,},
-	{.bitrate = 180, .hw_value = 0x07,},
-	{.bitrate = 240, .hw_value = 0x08,},
-	{.bitrate = 360, .hw_value = 0x09,},
-	{.bitrate = 480, .hw_value = 0x0a,},
-	{.bitrate = 540, .hw_value = 0x0b,},
-};
-
-static void rtl8xxxu_desc_to_mcsrate(u16 rate, u8 *mcs, u8 *nss)
-{
-	if (rate <= DESC_RATE_54M)
-		return;
-
-	if (rate >= DESC_RATE_MCS0 && rate <= DESC_RATE_MCS15) {
-		if (rate < DESC_RATE_MCS8)
-			*nss = 1;
-		else
-			*nss = 2;
-		*mcs = rate - DESC_RATE_MCS0;
-	}
-}
-
 static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 {
 	struct rtl8xxxu_priv *priv;