diff mbox series

[4/8] rtw89: ps: fine tune polling interval while changing low power mode

Message ID 20220503120001.79272-5-pkshih@realtek.com (mailing list archive)
State Accepted
Commit 39a7652103ff5f052b5eff944a1ed3d607f747f7
Delegated to: Kalle Valo
Headers show
Series rtw89: 8852c: add 8852ce to Makefile and Kconfig | expand

Commit Message

Ping-Ke Shih May 3, 2022, 11:59 a.m. UTC 
By experiments, it spends ~45/1090~2480us to enter/leave low power mode,
so the old polling interval 1000us can waste time. Use smaller polling
interval depends on experimental results to reduce the time to transition
state.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw89/mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw89/mac.c b/drivers/net/wireless/realtek/rtw89/mac.c
index 05b94842fe662..07f6634d56a01 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.c
+++ b/drivers/net/wireless/realtek/rtw89/mac.c
@@ -1050,6 +1050,7 @@  static int rtw89_mac_check_cpwm_state(struct rtw89_dev *rtwdev,
 void rtw89_mac_power_mode_change(struct rtw89_dev *rtwdev, bool enter)
 {
 	enum rtw89_rpwm_req_pwr_state state;
+	unsigned long delay = enter ? 10 : 150;
 	int ret;
 
 	if (enter)
@@ -1059,7 +1060,7 @@  void rtw89_mac_power_mode_change(struct rtw89_dev *rtwdev, bool enter)
 
 	rtw89_mac_send_rpwm(rtwdev, state, false);
 	ret = read_poll_timeout_atomic(rtw89_mac_check_cpwm_state, ret, !ret,
-				       1000, 15000, false, rtwdev, state);
+				       delay, 15000, false, rtwdev, state);
 	if (ret)
 		rtw89_err(rtwdev, "firmware failed to ack for %s ps mode\n",
 			  enter ? "entering" : "leaving");