[v2,2/4] brcmfmac: fix firmware trap while dumping obss stats

Commit Message

Ian Lin Sept. 28, 2022, 9:22 a.m. UTC

From: Wright Feng <[e-mail]>

When doing dump_survey, host will call "dump_obss" iovar to firmware
side. Host need to make sure the HW clock in dongle is on, or there is
high probability that firmware gets trap because register or shared
memory access failed. To fix this, we disable mpc when doing dump obss
and set it back after that.

[28350.512799] brcmfmac: brcmf_dump_obss: dump_obss error (-52)
[28743.402314] ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or
crashed
[28745.869430] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
[28745.877546] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle

Signed-off-by: Wright Feng <[e-mail]>
Signed-off-by: Chi-hsien Lin <[e-mail]>
Signed-off-by: Ian Lin <[e-mail]>
---
 .../broadcom/brcm80211/brcmfmac/cfg80211.c    | 38 +++++++++----------
 1 file changed, 17 insertions(+), 21 deletions(-)

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index f16dad462eb2..9f2f2a990f20 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -7659,16 +7659,15 @@  brcmf_dump_obss(struct brcmf_if *ifp, struct cca_msrmnt_query req,
 	int err;
 
 	buf = kzalloc(sizeof(char) * BRCMF_DCMD_MEDLEN, GFP_KERNEL);
-	if (unlikely(!buf)) {
-		brcmf_err("%s: buf alloc failed\n", __func__);
+	if (!buf)
 		return -ENOMEM;
-	}
 
 	memcpy(buf, &req, sizeof(struct cca_msrmnt_query));
 	err = brcmf_fil_iovar_data_get(ifp, "dump_obss",
 				       buf, BRCMF_DCMD_MEDLEN);
-	if (err < 0) {
+	if (err) {
 		brcmf_err("dump_obss error (%d)\n", err);
+		err = -EINVAL;
 		goto exit;
 	}
 	results = (struct cca_stats_n_flags *)(buf);
@@ -7676,11 +7675,9 @@  brcmf_dump_obss(struct brcmf_if *ifp, struct cca_msrmnt_query req,
 	if (req.msrmnt_query)
 		brcmf_parse_dump_obss(results->buf, survey);
 
-	kfree(buf);
-	return 0;
 exit:
 	kfree(buf);
-	return -EINVAL;
+	return err;
 }
 
 static s32
@@ -7719,7 +7716,7 @@  brcmf_cfg80211_dump_survey(struct wiphy *wiphy, struct net_device *ndev,
 	struct ieee80211_supported_band *band;
 	struct ieee80211_channel *chan;
 	struct cca_msrmnt_query req;
-	u32 val, noise;
+	u32 noise;
 	int err;
 
 	brcmf_dbg(TRACE, "Enter: channel idx=%d\n", idx);
@@ -7745,23 +7742,20 @@  brcmf_cfg80211_dump_survey(struct wiphy *wiphy, struct net_device *ndev,
 		return 0;
 	}
 
-	if (!idx) {
-		/* Disable mpc */
-		val = 0;
-		brcmf_set_mpc(ifp, val);
-		/* Set interface up, explicitly. */
-		val = 1;
-		err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, val);
-		if (err) {
-			brcmf_err("BRCMF_C_UP error (%d)\n", err);
-			return -EIO;
-		}
+	/* Disable mpc */
+	brcmf_set_mpc(ifp, 0);
+
+	/* Set interface up, explicitly. */
+	err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 1);
+	if (err) {
+		brcmf_err("set interface up failed, err = %d\n", err);
+		goto exit;
 	}
 
 	/* Get noise value */
 	err = brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_PHY_NOISE, &noise);
 	if (err) {
-		brcmf_err("Get Phy Noise failed, error = %d\n", err);
+		brcmf_err("Get Phy Noise failed, use dummy value\n");
 		noise = CHAN_NOISE_DUMMY;
 	}
 
@@ -7778,7 +7772,7 @@  brcmf_cfg80211_dump_survey(struct wiphy *wiphy, struct net_device *ndev,
 	/* Issue IOVAR to collect measurement results */
 	req.msrmnt_query = 1;
 	err = brcmf_dump_obss(ifp, req, &survey);
-	if (err < 0)
+	if (err)
 		goto exit;
 
 	info->channel = chan;
@@ -7799,6 +7793,8 @@  brcmf_cfg80211_dump_survey(struct wiphy *wiphy, struct net_device *ndev,
 		  info->noise, info->time_busy, info->time_rx, info->time_tx);
 
 exit:
+	if (!brcmf_is_apmode(ifp->vif))
+		brcmf_set_mpc(ifp, 1);
 	return err;
 }