| Message ID | 20221208160137.3855-1-shayne.chen@mediatek.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Felix Fietkau |
| Headers | show |
| Series | wifi: mt76: mt7915: add chip id condition in mt7915_check_eeprom() | expand |
Hi Shayne, On Fri, Dec 9, 2022 at 3:06 AM Shayne Chen <shayne.chen@mediatek.com> wrote: > > When flash mode is enabled, and the eeprom data in the flash is not for > the current chipset, it'll still be checked valid, and the default > eeprom bin won't be loaded. > (e.g., mt7915 NIC inserted with mt7916 eeprom data in the flash.) > > Fix this kind of case by adding chip id into consideration in > mt7915_check_eeprom(). > > Reported-by: Cheng-Ji Li <cheng-ji.li@mediatek.com> > Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> > --- > drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c | 12 +++++------- > 1 file changed, 5 insertions(+), 7 deletions(-) > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c > index 59069fb86414..e21aa03c85b1 100644 > --- a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c > +++ b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c > @@ -33,14 +33,12 @@ static int mt7915_check_eeprom(struct mt7915_dev *dev) > u8 *eeprom = dev->mt76.eeprom.data; > u16 val = get_unaligned_le16(eeprom); > > - switch (val) { > - case 0x7915: > - case 0x7916: > - case 0x7986: > + if ((is_mt7915(&dev->mt76) && val == 0x7915) || > + (is_mt7916(&dev->mt76) && val == 0x7916) || > + (is_mt7986(&dev->mt76) && val == 0x7986)) > return 0; > - default: > - return -EINVAL; > - } > + > + return -EINVAL; If this returned a bool, you could write this as: switch (val) { case 0x7915: return is_mt7915(&dev->mt76); } Thanks,
On Fri, 2022-12-09 at 10:14 +1100, Julian Calaby wrote: > Hi Shayne, > > On Fri, Dec 9, 2022 at 3:06 AM Shayne Chen <shayne.chen@mediatek.com> > wrote: > > > > When flash mode is enabled, and the eeprom data in the flash is not > > for > > the current chipset, it'll still be checked valid, and the default > > eeprom bin won't be loaded. > > (e.g., mt7915 NIC inserted with mt7916 eeprom data in the flash.) > > > > Fix this kind of case by adding chip id into consideration in > > mt7915_check_eeprom(). > > > > Reported-by: Cheng-Ji Li <cheng-ji.li@mediatek.com> > > Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> > > --- > > drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c | 12 +++++----- > > -- > > 1 file changed, 5 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c > > b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c > > index 59069fb86414..e21aa03c85b1 100644 > > --- a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c > > +++ b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c > > @@ -33,14 +33,12 @@ static int mt7915_check_eeprom(struct > > mt7915_dev *dev) > > u8 *eeprom = dev->mt76.eeprom.data; > > u16 val = get_unaligned_le16(eeprom); > > > > - switch (val) { > > - case 0x7915: > > - case 0x7916: > > - case 0x7986: > > + if ((is_mt7915(&dev->mt76) && val == 0x7915) || > > + (is_mt7916(&dev->mt76) && val == 0x7916) || > > + (is_mt7986(&dev->mt76) && val == 0x7986)) > > return 0; > > - default: > > - return -EINVAL; > > - } > > + > > + return -EINVAL; > > If this returned a bool, you could write this as: > > switch (val) { > case 0x7915: > return is_mt7915(&dev->mt76); > } > > Thanks, > Hi Julian, Thanks for your comment. This function returns 0 on success and -EINVAL on fail, so I'll add a macro to convert the return value in v2. Regards, Shayne
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c index 59069fb86414..e21aa03c85b1 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c +++ b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c @@ -33,14 +33,12 @@ static int mt7915_check_eeprom(struct mt7915_dev *dev) u8 *eeprom = dev->mt76.eeprom.data; u16 val = get_unaligned_le16(eeprom); - switch (val) { - case 0x7915: - case 0x7916: - case 0x7986: + if ((is_mt7915(&dev->mt76) && val == 0x7915) || + (is_mt7916(&dev->mt76) && val == 0x7916) || + (is_mt7986(&dev->mt76) && val == 0x7986)) return 0; - default: - return -EINVAL; - } + + return -EINVAL; } static char *mt7915_eeprom_name(struct mt7915_dev *dev)
When flash mode is enabled, and the eeprom data in the flash is not for the current chipset, it'll still be checked valid, and the default eeprom bin won't be loaded. (e.g., mt7915 NIC inserted with mt7916 eeprom data in the flash.) Fix this kind of case by adding chip id into consideration in mt7915_check_eeprom(). Reported-by: Cheng-Ji Li <cheng-ji.li@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> --- drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)