diff mbox series

[v2] wifi: ath12k: fix potential wmi_mgmt_tx_queue race condition

Message ID 20230419095758.19998-1-quic_rgnanase@quicinc.com (mailing list archive)
State Accepted
Commit e995f3f602a3fd9c8e0f97f59b37002d4ab5ec83
Delegated to: Kalle Valo
Headers show
Series [v2] wifi: ath12k: fix potential wmi_mgmt_tx_queue race condition | expand

Commit Message

Ramya Gnanasekar April 19, 2023, 9:57 a.m. UTC
From: Karthik M <quic_karm@quicinc.com>

During stress test with maximum VAPs and peer connected, below warning
is seen:

[ 1079.110967] ath12k_pci 0004:01:00.0: mgmt tx queue is full
[ 1079.117708] ath12k_pci 0004:01:00.0: failed to queue management frame -28
[ 1079.123191] ath12k_pci 0004:01:00.0: mgmt tx queue is full
[ 1079.129960] ath12k_pci 0004:01:00.0: failed to queue management frame -28
[ 1079.135641] ath12k_pci 0004:01:00.0: mgmt tx queue is full

This is caused by potential race condition while accessing skb_queue_len().
When ath12k_mgmt_over_wmi_tx_work() and ath12k_mac_mgmt_tx() is called concurrently,
then skb_queue_len() might fetch list length which is modified by skb_queue_tail()
or skb_dequeue().

Replace skb_queue_len() with skb_queue_len_lockless() which will
prevent concurrent modified access using READ_ONCE(). And also use '>=',
in case we queue a few SKBs simultaneously.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthik M <quic_karm@quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
---
v2:
    - Corrected patch format
---
 drivers/net/wireless/ath/ath12k/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Kalle Valo May 5, 2023, 12:58 p.m. UTC | #1
Ramya Gnanasekar <quic_rgnanase@quicinc.com> wrote:

> During stress test with maximum VAPs and peer connected, below warning
> is seen:
> 
> [ 1079.110967] ath12k_pci 0004:01:00.0: mgmt tx queue is full
> [ 1079.117708] ath12k_pci 0004:01:00.0: failed to queue management frame -28
> [ 1079.123191] ath12k_pci 0004:01:00.0: mgmt tx queue is full
> [ 1079.129960] ath12k_pci 0004:01:00.0: failed to queue management frame -28
> [ 1079.135641] ath12k_pci 0004:01:00.0: mgmt tx queue is full
> 
> This is caused by potential race condition while accessing skb_queue_len().
> When ath12k_mgmt_over_wmi_tx_work() and ath12k_mac_mgmt_tx() is called concurrently,
> then skb_queue_len() might fetch list length which is modified by skb_queue_tail()
> or skb_dequeue().
> 
> Replace skb_queue_len() with skb_queue_len_lockless() which will
> prevent concurrent modified access using READ_ONCE(). And also use '>=',
> in case we queue a few SKBs simultaneously.
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Karthik M <quic_karm@quicinc.com>
> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>

Patch applied to ath-next branch of ath.git, thanks.

e995f3f602a3 wifi: ath12k: fix potential wmi_mgmt_tx_queue race condition
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 0e5cc477ba56..cc458fed5e78 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -4489,7 +4489,7 @@  static int ath12k_mac_mgmt_tx(struct ath12k *ar, struct sk_buff *skb,
 		return -ENOSPC;
 	}
 
-	if (skb_queue_len(q) == ATH12K_TX_MGMT_NUM_PENDING_MAX) {
+	if (skb_queue_len_lockless(q) >= ATH12K_TX_MGMT_NUM_PENDING_MAX) {
 		ath12k_warn(ar->ab, "mgmt tx queue is full\n");
 		return -ENOSPC;
 	}