@@ -193,11 +193,11 @@ static void ath12k_dp_rxdesc_set_msdu_len(struct ath12k_base *ab,
ab->hw_params->hal_ops->rx_desc_set_msdu_len(desc, len);
}
-static bool ath12k_dp_rx_h_is_mcbc(struct ath12k_base *ab,
- struct hal_rx_desc *desc)
+static bool ath12k_dp_rx_h_is_da_mcbc(struct ath12k_base *ab,
+ struct hal_rx_desc *desc)
{
return (ath12k_dp_rx_h_first_msdu(ab, desc) &&
- ab->hw_params->hal_ops->rx_desc_is_mcbc(desc));
+ ab->hw_params->hal_ops->rx_desc_is_da_mcbc(desc));
}
static bool ath12k_dp_rxdesc_mac_addr2_valid(struct ath12k_base *ab,
@@ -2208,7 +2208,7 @@ static void ath12k_dp_rx_h_mpdu(struct ath12k *ar,
/* PN for multicast packets will be checked in mac80211 */
rxcb = ATH12K_SKB_RXCB(msdu);
- fill_crypto_hdr = ath12k_dp_rx_h_is_mcbc(ar->ab, rx_desc);
+ fill_crypto_hdr = ath12k_dp_rx_h_is_da_mcbc(ar->ab, rx_desc);
rxcb->is_mcbc = fill_crypto_hdr;
if (rxcb->is_mcbc)
@@ -447,10 +447,10 @@ static u8 *ath12k_hw_qcn9274_rx_desc_mpdu_start_addr2(struct hal_rx_desc *desc)
return desc->u.qcn9274.mpdu_start.addr2;
}
-static bool ath12k_hw_qcn9274_rx_desc_is_mcbc(struct hal_rx_desc *desc)
+static bool ath12k_hw_qcn9274_rx_desc_is_da_mcbc(struct hal_rx_desc *desc)
{
- return __le32_to_cpu(desc->u.qcn9274.mpdu_start.info6) &
- RX_MPDU_START_INFO6_MCAST_BCAST;
+ return __le16_to_cpu(desc->u.qcn9274.msdu_end.info5) &
+ RX_MSDU_END_INFO5_DA_IS_MCBC;
}
static void ath12k_hw_qcn9274_rx_desc_get_dot11_hdr(struct hal_rx_desc *desc,
@@ -708,7 +708,7 @@ const struct hal_ops hal_qcn9274_ops = {
.rx_desc_get_msdu_end_offset = ath12k_hw_qcn9274_rx_desc_get_msdu_end_offset,
.rx_desc_mac_addr2_valid = ath12k_hw_qcn9274_rx_desc_mac_addr2_valid,
.rx_desc_mpdu_start_addr2 = ath12k_hw_qcn9274_rx_desc_mpdu_start_addr2,
- .rx_desc_is_mcbc = ath12k_hw_qcn9274_rx_desc_is_mcbc,
+ .rx_desc_is_da_mcbc = ath12k_hw_qcn9274_rx_desc_is_da_mcbc,
.rx_desc_get_dot11_hdr = ath12k_hw_qcn9274_rx_desc_get_dot11_hdr,
.rx_desc_get_crypto_header = ath12k_hw_qcn9274_rx_desc_get_crypto_hdr,
.rx_desc_get_mpdu_frame_ctl = ath12k_hw_qcn9274_rx_desc_get_mpdu_frame_ctl,
@@ -887,10 +887,10 @@ static u8 *ath12k_hw_wcn7850_rx_desc_mpdu_start_addr2(struct hal_rx_desc *desc)
return desc->u.wcn7850.mpdu_start.addr2;
}
-static bool ath12k_hw_wcn7850_rx_desc_is_mcbc(struct hal_rx_desc *desc)
+static bool ath12k_hw_wcn7850_rx_desc_is_da_mcbc(struct hal_rx_desc *desc)
{
- return __le32_to_cpu(desc->u.wcn7850.mpdu_start.info6) &
- RX_MPDU_START_INFO6_MCAST_BCAST;
+ return __le16_to_cpu(desc->u.wcn7850.msdu_end.info5) &
+ RX_MSDU_END_INFO5_DA_IS_MCBC;
}
static void ath12k_hw_wcn7850_rx_desc_get_dot11_hdr(struct hal_rx_desc *desc,
@@ -1163,7 +1163,7 @@ const struct hal_ops hal_wcn7850_ops = {
.rx_desc_get_msdu_end_offset = ath12k_hw_wcn7850_rx_desc_get_msdu_end_offset,
.rx_desc_mac_addr2_valid = ath12k_hw_wcn7850_rx_desc_mac_addr2_valid,
.rx_desc_mpdu_start_addr2 = ath12k_hw_wcn7850_rx_desc_mpdu_start_addr2,
- .rx_desc_is_mcbc = ath12k_hw_wcn7850_rx_desc_is_mcbc,
+ .rx_desc_is_da_mcbc = ath12k_hw_wcn7850_rx_desc_is_da_mcbc,
.rx_desc_get_dot11_hdr = ath12k_hw_wcn7850_rx_desc_get_dot11_hdr,
.rx_desc_get_crypto_header = ath12k_hw_wcn7850_rx_desc_get_crypto_hdr,
.rx_desc_get_mpdu_frame_ctl = ath12k_hw_wcn7850_rx_desc_get_mpdu_frame_ctl,
@@ -1063,7 +1063,7 @@ struct hal_ops {
u32 (*rx_desc_get_msdu_end_offset)(void);
bool (*rx_desc_mac_addr2_valid)(struct hal_rx_desc *desc);
u8* (*rx_desc_mpdu_start_addr2)(struct hal_rx_desc *desc);
- bool (*rx_desc_is_mcbc)(struct hal_rx_desc *desc);
+ bool (*rx_desc_is_da_mcbc)(struct hal_rx_desc *desc);
void (*rx_desc_get_dot11_hdr)(struct hal_rx_desc *desc,
struct ieee80211_hdr *hdr);
u16 (*rx_desc_get_mpdu_frame_ctl)(struct hal_rx_desc *desc);
We are seeing a very low TCP throughput testing with some specific tools. This is because for sub-frames of an AMSDU, MCBC flag in mpdu_start may be not valid, and as a result those frames would be dropped by kernel. Add a new helper to get it from msdu_end. Also clean up original helper since it is not needed any more. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> --- v3: 1. remove original helper since it is not needed. v2: 1. add a new helper according to Vasanth's comment. 2. change to use __le16_to_cpu instead of __le32_to_cpu drivers/net/wireless/ath/ath12k/dp_rx.c | 8 ++++---- drivers/net/wireless/ath/ath12k/hal.c | 16 ++++++++-------- drivers/net/wireless/ath/ath12k/hal.h | 2 +- 3 files changed, 13 insertions(+), 13 deletions(-) base-commit: 4ab7f08db5310ded48a5c1f3ec3f2e177ba6b1c2