diff mbox series

[3/4] wifi: ath12k: avoid firmware crash when reg set for WCN7850

Message ID 20230906082948.18452-4-quic_wgong@quicinc.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series wifi: ath12k: add 11d scan offload support and handle country code for WCN7850 | expand

Commit Message

Wen Gong Sept. 6, 2023, 8:29 a.m. UTC
For the NL80211_REGDOM_SET_BY_USER hint from cfg80211, it set the new
alpha2 code to ath12k, then ath12k send WMI_SET_INIT_COUNTRY_CMDID to
firmware for all chips currently. When test with WCN7850 chips,
this WMI CMD leads firmware crash.

For AP based chips(QCN92xx), WMI_SET_INIT_COUNTRY_CMDID is the correct
command use. However, for STATION based chips(WCN7850), it need to use
another WMI CMD, WMI_SET_CURRENT_COUNTRY_CMDID.

Add flag current_cc_support in hardware parameters. It is used to
distinguish AP/STA platform. After that, the firmware will work
normal and the regulatory feature works well for WCN7850.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/hw.c  |  3 +++
 drivers/net/wireless/ath/ath12k/hw.h  |  1 +
 drivers/net/wireless/ath/ath12k/reg.c | 29 ++++++++++++++++++---------
 3 files changed, 23 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index 5991cc91cd00..c9ed4c0e0da5 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -907,6 +907,7 @@  static const struct ath12k_hw_params ath12k_hw_params[] = {
 		.hal_ops = &hal_qcn9274_ops,
 
 		.qmi_cnss_feature_bitmap = BIT(CNSS_QDSS_CFG_MISS_V01),
+		.current_cc_support = false,
 	},
 	{
 		.name = "wcn7850 hw2.0",
@@ -964,6 +965,7 @@  static const struct ath12k_hw_params ath12k_hw_params[] = {
 
 		.qmi_cnss_feature_bitmap = BIT(CNSS_QDSS_CFG_MISS_V01) |
 					   BIT(CNSS_PCIE_PERST_NO_PULL_V01),
+		.current_cc_support = true,
 	},
 	{
 		.name = "qcn9274 hw2.0",
@@ -1019,6 +1021,7 @@  static const struct ath12k_hw_params ath12k_hw_params[] = {
 		.hal_ops = &hal_qcn9274_ops,
 
 		.qmi_cnss_feature_bitmap = BIT(CNSS_QDSS_CFG_MISS_V01),
+		.current_cc_support = false,
 	},
 };
 
diff --git a/drivers/net/wireless/ath/ath12k/hw.h b/drivers/net/wireless/ath/ath12k/hw.h
index e6c4223c283c..292c07bb1a8b 100644
--- a/drivers/net/wireless/ath/ath12k/hw.h
+++ b/drivers/net/wireless/ath/ath12k/hw.h
@@ -173,6 +173,7 @@  struct ath12k_hw_params {
 	bool tcl_ring_retry:1;
 	bool reoq_lut_support:1;
 	bool supports_shadow_regs:1;
+	bool current_cc_support:1;
 
 	u32 hal_desc_sz;
 	u32 num_tcl_banks;
diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c
index c2f2fcce9fb1..97c93a4901e6 100644
--- a/drivers/net/wireless/ath/ath12k/reg.c
+++ b/drivers/net/wireless/ath/ath12k/reg.c
@@ -48,6 +48,7 @@  ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
 {
 	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
 	struct ath12k_wmi_init_country_arg arg;
+	struct wmi_set_current_country_params set_current_param = {};
 	struct ath12k *ar = hw->priv;
 	int ret;
 
@@ -76,18 +77,26 @@  ath12k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
 		return;
 	}
 
-	/* Set the country code to the firmware and wait for
-	 * the WMI_REG_CHAN_LIST_CC EVENT for updating the
-	 * reg info
+	/* Set the country code to the firmware. ath12k will subsequently receive
+	 * the WMI_REG_CHAN_LIST_CC EVENT for updating the regulatory info.
 	 */
-	arg.flags = ALPHA_IS_SET;
-	memcpy(&arg.cc_info.alpha2, request->alpha2, 2);
-	arg.cc_info.alpha2[2] = 0;
+	if (ar->ab->hw_params->current_cc_support) {
+		memcpy(&set_current_param.alpha2, request->alpha2, 2);
 
-	ret = ath12k_wmi_send_init_country_cmd(ar, &arg);
-	if (ret)
-		ath12k_warn(ar->ab,
-			    "INIT Country code set to fw failed : %d\n", ret);
+		ret = ath12k_wmi_send_set_current_country_cmd(ar, &set_current_param);
+		if (ret)
+			ath12k_warn(ar->ab,
+				    "failed set current country code: %d\n", ret);
+	} else {
+		arg.flags = ALPHA_IS_SET;
+		memcpy(&arg.cc_info.alpha2, request->alpha2, 2);
+		arg.cc_info.alpha2[2] = 0;
+
+		ret = ath12k_wmi_send_init_country_cmd(ar, &arg);
+		if (ret)
+			ath12k_warn(ar->ab,
+				    "INIT Country code set to fw failed : %d\n", ret);
+	}
 
 	ath12k_mac_11d_scan_stop(ar);
 	ar->regdom_set_by_user = true;