diff mbox series

[RFC,v2,5/8] wifi: ath11k: do not dump SRNG statistics during resume

Message ID 20231127162022.518834-6-kvalo@kernel.org (mailing list archive)
State RFC
Delegated to: Kalle Valo
Headers show
Series wifi: ath11k: hibernation support | expand

Commit Message

Kalle Valo Nov. 27, 2023, 4:20 p.m. UTC
From: Baochen Qiang <quic_bqiang@quicinc.com>

Both the firmware reset feature and the power management
suspend/resume feature share common power-down and power-up
functionality. One aspect of the power-up functionality is
the handling of the ATH11K_QMI_EVENT_FW_INIT_DONE event.
When this event is received, a call is made to
ath11k_hal_dump_srng_stats(), with the purpose to collect
information that may be useful in debugging the cause of a
firmware reset.

Unfortunately, since this functionality is shared between
both the firmware reset path and the power management
resume path, the kernel log is flooded with messages during
resume. Since these messages are not useful during resume,
and in fact can be confusing and can increase the time it
takes to resume, update the logic to only call
ath11k_hal_dump_srng_stats() during firmware reset.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/qmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index c270dc46d506..97a74563d4a6 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -3249,7 +3249,8 @@  static void ath11k_qmi_driver_event_work(struct work_struct *work)
 		case ATH11K_QMI_EVENT_FW_INIT_DONE:
 			clear_bit(ATH11K_FLAG_QMI_FAIL, &ab->dev_flags);
 			if (test_bit(ATH11K_FLAG_REGISTERED, &ab->dev_flags)) {
-				ath11k_hal_dump_srng_stats(ab);
+				if (ab->is_reset)
+					ath11k_hal_dump_srng_stats(ab);
 				queue_work(ab->workqueue, &ab->restart_work);
 				break;
 			}