diff mbox series

[v3] wifi: mwifiex: configure BSSID consistently when starting AP

Message ID 20231215005118.17031-1-yu-hao.lin@nxp.com (mailing list archive)
State Accepted
Commit f0dd488e11e71ac095df7638d892209c629d9af2
Delegated to: Kalle Valo
Headers show
Series [v3] wifi: mwifiex: configure BSSID consistently when starting AP | expand

Commit Message

David Lin Dec. 15, 2023, 12:51 a.m. UTC
AP BSSID configuration is missing at AP start.
Without this fix, FW returns STA interface MAC address after first init.
When hostapd restarts, it gets MAC address from netdev before driver
sets STA MAC to netdev again. Now MAC address between hostapd and net
interface are different causes STA cannot connect to AP.
After that MAC address of uap0 mlan0 become the same. And issue
disappears after following hostapd restart (another issue is AP/STA MAC
address become the same).
This patch fixes the issue cleanly.

Signed-off-by: David Lin <yu-hao.lin@nxp.com>
Fixes: 12190c5d80bd ("mwifiex: add cfg80211 start_ap and stop_ap handlers")
Cc: stable@vger.kernel.org
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Rafael Beims <rafael.beims@toradex.com> # Verdin iMX8MP/SD8997 SD
Acked-by: Brian Norris <briannorris@chromium.org>

---

v3:
   - patch title change from "wifi: mwifiex: fix STA cannot connect to AP"
     to "wifi: mwifiex: configure BSSID consistently when starting AP".

v2:
   - v1 was a not finished patch that was send to the LKML by mistake.
---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 2 ++
 drivers/net/wireless/marvell/mwifiex/fw.h       | 1 +
 drivers/net/wireless/marvell/mwifiex/ioctl.h    | 1 +
 drivers/net/wireless/marvell/mwifiex/uap_cmd.c  | 8 ++++++++
 4 files changed, 12 insertions(+)


base-commit: 783004b6dbda2cfe9a552a4cc9c1d168a2068f6c

Comments

Kalle Valo Dec. 15, 2023, 1:25 p.m. UTC | #1
David Lin <yu-hao.lin@nxp.com> wrote:

> AP BSSID configuration is missing at AP start.  Without this fix, FW returns
> STA interface MAC address after first init.  When hostapd restarts, it gets MAC
> address from netdev before driver sets STA MAC to netdev again. Now MAC address
> between hostapd and net interface are different causes STA cannot connect to
> AP.  After that MAC address of uap0 mlan0 become the same. And issue disappears
> after following hostapd restart (another issue is AP/STA MAC address become the
> same).
> 
> This patch fixes the issue cleanly.
> 
> Signed-off-by: David Lin <yu-hao.lin@nxp.com>
> Fixes: 12190c5d80bd ("mwifiex: add cfg80211 start_ap and stop_ap handlers")
> Cc: stable@vger.kernel.org
> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
> Tested-by: Rafael Beims <rafael.beims@toradex.com> # Verdin iMX8MP/SD8997 SD
> Acked-by: Brian Norris <briannorris@chromium.org>

Patch applied to wireless-next.git, thanks.

f0dd488e11e7 wifi: mwifiex: configure BSSID consistently when starting AP
diff mbox series

Patch

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 7a15ea8072e6..3604abcbcff9 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -2047,6 +2047,8 @@  static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 
 	mwifiex_set_sys_config_invalid_data(bss_cfg);
 
+	memcpy(bss_cfg->mac_addr, priv->curr_addr, ETH_ALEN);
+
 	if (params->beacon_interval)
 		bss_cfg->beacon_period = params->beacon_interval;
 	if (params->dtim_period)
diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h
index 8e6db904e5b2..62f3c9a52a1d 100644
--- a/drivers/net/wireless/marvell/mwifiex/fw.h
+++ b/drivers/net/wireless/marvell/mwifiex/fw.h
@@ -165,6 +165,7 @@  enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define TLV_TYPE_STA_MAC_ADDR       (PROPRIETARY_TLV_BASE_ID + 32)
 #define TLV_TYPE_BSSID              (PROPRIETARY_TLV_BASE_ID + 35)
 #define TLV_TYPE_CHANNELBANDLIST    (PROPRIETARY_TLV_BASE_ID + 42)
+#define TLV_TYPE_UAP_MAC_ADDRESS    (PROPRIETARY_TLV_BASE_ID + 43)
 #define TLV_TYPE_UAP_BEACON_PERIOD  (PROPRIETARY_TLV_BASE_ID + 44)
 #define TLV_TYPE_UAP_DTIM_PERIOD    (PROPRIETARY_TLV_BASE_ID + 45)
 #define TLV_TYPE_UAP_BCAST_SSID     (PROPRIETARY_TLV_BASE_ID + 48)
diff --git a/drivers/net/wireless/marvell/mwifiex/ioctl.h b/drivers/net/wireless/marvell/mwifiex/ioctl.h
index 091e7ca79376..e8825f302de8 100644
--- a/drivers/net/wireless/marvell/mwifiex/ioctl.h
+++ b/drivers/net/wireless/marvell/mwifiex/ioctl.h
@@ -107,6 +107,7 @@  struct mwifiex_uap_bss_param {
 	u8 qos_info;
 	u8 power_constraint;
 	struct mwifiex_types_wmm_info wmm_info;
+	u8 mac_addr[ETH_ALEN];
 };
 
 enum {
diff --git a/drivers/net/wireless/marvell/mwifiex/uap_cmd.c b/drivers/net/wireless/marvell/mwifiex/uap_cmd.c
index e78a201cd150..491e36611909 100644
--- a/drivers/net/wireless/marvell/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/marvell/mwifiex/uap_cmd.c
@@ -468,6 +468,7 @@  void mwifiex_config_uap_11d(struct mwifiex_private *priv,
 static int
 mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size)
 {
+	struct host_cmd_tlv_mac_addr *mac_tlv;
 	struct host_cmd_tlv_dtim_period *dtim_period;
 	struct host_cmd_tlv_beacon_period *beacon_period;
 	struct host_cmd_tlv_ssid *ssid;
@@ -487,6 +488,13 @@  mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size)
 	int i;
 	u16 cmd_size = *param_size;
 
+	mac_tlv = (struct host_cmd_tlv_mac_addr *)tlv;
+	mac_tlv->header.type = cpu_to_le16(TLV_TYPE_UAP_MAC_ADDRESS);
+	mac_tlv->header.len = cpu_to_le16(ETH_ALEN);
+	memcpy(mac_tlv->mac_addr, bss_cfg->mac_addr, ETH_ALEN);
+	cmd_size += sizeof(struct host_cmd_tlv_mac_addr);
+	tlv += sizeof(struct host_cmd_tlv_mac_addr);
+
 	if (bss_cfg->ssid.ssid_len) {
 		ssid = (struct host_cmd_tlv_ssid *)tlv;
 		ssid->header.type = cpu_to_le16(TLV_TYPE_UAP_SSID);