diff mbox series

[v10,05/12] wifi: ath11k: update regulatory rules when connect to AP on 6 GHz band for station

Message ID 20231218085844.2658-6-quic_bqiang@quicinc.com (mailing list archive)
State Accepted
Commit 1329beb56297021042788223e666f6ccd2e11a0a
Delegated to: Kalle Valo
Headers show
Series wifi: ath11k: add support for 6 GHz station for various modes : LPI, SP and VLP | expand

Commit Message

Baochen Qiang Dec. 18, 2023, 8:58 a.m. UTC 
From: Wen Gong <quic_wgong@quicinc.com>

When station connect to AP on 6 GHz band, it needs switch the regulatory
rules according to the regulatory info sub field in HE operation element.
Switch to the power type which AP used for station interface.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
---
v10:
 no change.
v9:
 no change.
v8:
 no change.
v7:
 1. return -EINVAL for IEEE80211_REG_UNSET_AP.

 drivers/net/wireless/ath/ath11k/mac.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index c7e7fef7946f..8eed1be63a8a 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -7619,6 +7619,8 @@  ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 	struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
 	int ret;
 	struct peer_create_params param;
+	struct cur_regulatory_info *reg_info;
+	enum ieee80211_ap_reg_power power_type;
 
 	mutex_lock(&ar->conf_mutex);
 
@@ -7626,6 +7628,20 @@  ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 		   "chanctx assign ptr %p vdev_id %i\n",
 		   ctx, arvif->vdev_id);
 
+	if (ath11k_wmi_supports_6ghz_cc_ext(ar) &&
+	    ctx->def.chan->band == NL80211_BAND_6GHZ &&
+	    arvif->vdev_type == WMI_VDEV_TYPE_STA) {
+		reg_info = &ab->reg_info_store[ar->pdev_idx];
+		power_type = vif->bss_conf.power_type;
+		ath11k_dbg(ab, ATH11K_DBG_MAC, "mac chanctx power type %d\n",
+			   power_type);
+		if (power_type == IEEE80211_REG_UNSET_AP) {
+			ret = -EINVAL;
+			goto out;
+		}
+		ath11k_reg_handle_chan_list(ab, reg_info, power_type);
+	}
+
 	/* for QCA6390 bss peer must be created before vdev_start */
 	if (ab->hw_params.vdev_start_delay &&
 	    arvif->vdev_type != WMI_VDEV_TYPE_AP &&