@@ -3059,6 +3059,7 @@ struct cfg80211_assoc_link {
* @CONNECT_REQ_MLO_SUPPORT: Userspace indicates support for handling MLD links.
* Drivers shall disable MLO features for the current association if this
* flag is not set.
+ * @ASSOC_REQ_SPP_AMSDU: SPP A-MSDUs will be used on this connection (if any)
*/
enum cfg80211_assoc_req_flags {
ASSOC_REQ_DISABLE_HT = BIT(0),
@@ -3068,6 +3069,7 @@ enum cfg80211_assoc_req_flags {
ASSOC_REQ_DISABLE_HE = BIT(4),
ASSOC_REQ_DISABLE_EHT = BIT(5),
CONNECT_REQ_MLO_SUPPORT = BIT(6),
+ ASSOC_REQ_SPP_AMSDU = BIT(7),
};
/**
@@ -2851,6 +2851,10 @@ enum nl80211_commands {
* mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
* in Draft P802.11be_D4.0.
*
+ * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with
+ * %NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs
+ * are used on this connection
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3394,6 +3398,8 @@ enum nl80211_attrs {
NL80211_ATTR_MLO_TTLM_DLINK,
NL80211_ATTR_MLO_TTLM_ULINK,
+ NL80211_ATTR_ASSOC_SPP_AMSDU,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -3534,6 +3540,7 @@ enum nl80211_iftype {
* @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
* that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
* previously added station into associated state
+ * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs
* @NL80211_STA_FLAG_MAX: highest station flag number currently defined
* @__NL80211_STA_FLAG_AFTER_LAST: internal use
*/
@@ -3546,6 +3553,7 @@ enum nl80211_sta_flags {
NL80211_STA_FLAG_AUTHENTICATED,
NL80211_STA_FLAG_TDLS_PEER,
NL80211_STA_FLAG_ASSOCIATED,
+ NL80211_STA_FLAG_SPP_AMSDU,
/* keep last */
__NL80211_STA_FLAG_AFTER_LAST,
@@ -6520,6 +6528,11 @@ enum nl80211_feature_flags {
* DFS master on the same channel as described in FCC-594280 D01
* (Section B.3). This, for example, allows P2P GO and P2P clients to
* operate on DFS channels as long as there's a concurrent BSS connection.
+ *
+ * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP
+ * (signaling and payload protected) A-MSDUs and this shall be advertised
+ * in the RSNXE.
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -6594,6 +6607,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_OWE_OFFLOAD,
NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
NL80211_EXT_FEATURE_DFS_CONCURRENT,
+ NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -821,6 +821,7 @@ static const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
[NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA] = { .type = NLA_FLAG },
[NL80211_ATTR_MLO_TTLM_DLINK] = NLA_POLICY_EXACT_LEN(sizeof(u16) * 8),
[NL80211_ATTR_MLO_TTLM_ULINK] = NLA_POLICY_EXACT_LEN(sizeof(u16) * 8),
+ [NL80211_ATTR_ASSOC_SPP_AMSDU] = { .type = NLA_FLAG },
};
/* policy for the key attributes */
@@ -6873,7 +6874,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
return -EINVAL;
/* When you run into this, adjust the code below for the new flag */
- BUILD_BUG_ON(NL80211_STA_FLAG_MAX != 7);
+ BUILD_BUG_ON(NL80211_STA_FLAG_MAX != 8);
switch (statype) {
case CFG80211_STA_MESH_PEER_KERNEL:
@@ -6933,6 +6934,8 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
params->link_sta_params.he_capa ||
params->link_sta_params.eht_capa)
return -EINVAL;
+ if (params->sta_flags_mask & BIT(NL80211_STA_FLAG_SPP_AMSDU))
+ return -EINVAL;
}
if (statype != CFG80211_STA_AP_CLIENT &&
@@ -6956,7 +6959,8 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
BIT(NL80211_STA_FLAG_ASSOCIATED) |
BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) |
BIT(NL80211_STA_FLAG_WME) |
- BIT(NL80211_STA_FLAG_MFP)))
+ BIT(NL80211_STA_FLAG_MFP) |
+ BIT(NL80211_STA_FLAG_SPP_AMSDU)))
return -EINVAL;
/* but authenticated/associated only if driver handles it */
@@ -7515,7 +7519,7 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
/* When you run into this, adjust the code below for the new flag */
- BUILD_BUG_ON(NL80211_STA_FLAG_MAX != 7);
+ BUILD_BUG_ON(NL80211_STA_FLAG_MAX != 8);
switch (dev->ieee80211_ptr->iftype) {
case NL80211_IFTYPE_AP:
@@ -7539,6 +7543,11 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
params.sta_flags_mask & auth_assoc)
return -EINVAL;
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT) &&
+ params.sta_flags_mask & BIT(NL80211_STA_FLAG_SPP_AMSDU))
+ return -EINVAL;
+
/* Older userspace, or userspace wanting to be compatible with
* !NL80211_FEATURE_FULL_AP_CLIENT_STATE, will not set the auth
* and assoc flags in the mask, but assumes the station will be
@@ -11101,6 +11110,15 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
sizeof(req.s1g_capa));
}
+ if (nla_get_flag(info->attrs[NL80211_ATTR_ASSOC_SPP_AMSDU])) {
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT)) {
+ GENL_SET_ERR_MSG(info, "SPP A-MSDUs not supported");
+ return -EINVAL;
+ }
+ req.flags |= ASSOC_REQ_SPP_AMSDU;
+ }
+
req.link_id = nl80211_link_id_or_invalid(info->attrs);
if (info->attrs[NL80211_ATTR_MLO_LINKS]) {