diff mbox series

[2/6] wifi: ath12k: Correct 6 GHz frequency value in rx status

Message ID 20240325212304.28241-3-quic_pradeepc@quicinc.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series bug fixes and enhancements to 6 GHz band support | expand

Commit Message

Pradeep Kumar Chitrapu March 25, 2024, 9:23 p.m. UTC
The frequency in the rx status is currently being filled
incorrectly for the 6 GHz band. The channel number received is
invalid in this case, resulting in packet drops. Fix this
issue by correcting the frequency calculation.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/dp_rx.c |  9 ++++++---
 drivers/net/wireless/ath/ath12k/wmi.c   | 10 +++++++---
 2 files changed, 13 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c
index a593beecdd12..2382274dd857 100644
--- a/drivers/net/wireless/ath/ath12k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_rx.c
@@ -2397,8 +2397,10 @@  void ath12k_dp_rx_h_ppdu(struct ath12k *ar, struct hal_rx_desc *rx_desc,
 	channel_num = meta_data;
 	center_freq = meta_data >> 16;
 
-	if (center_freq >= 5935 && center_freq <= 7105) {
+	if (center_freq >= ATH12K_MIN_6G_FREQ &&
+	    center_freq <= ATH12K_MAX_6G_FREQ) {
 		rx_status->band = NL80211_BAND_6GHZ;
+		rx_status->freq = center_freq;
 	} else if (channel_num >= 1 && channel_num <= 14) {
 		rx_status->band = NL80211_BAND_2GHZ;
 	} else if (channel_num >= 36 && channel_num <= 173) {
@@ -2416,8 +2418,9 @@  void ath12k_dp_rx_h_ppdu(struct ath12k *ar, struct hal_rx_desc *rx_desc,
 				rx_desc, sizeof(*rx_desc));
 	}
 
-	rx_status->freq = ieee80211_channel_to_frequency(channel_num,
-							 rx_status->band);
+	if (rx_status->band != NL80211_BAND_6GHZ)
+		rx_status->freq = ieee80211_channel_to_frequency(channel_num,
+								 rx_status->band);
 
 	ath12k_dp_rx_h_rate(ar, rx_desc, rx_status);
 }
diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index 34de3d16efc0..2f0d82d88f20 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -5877,8 +5877,10 @@  static void ath12k_mgmt_rx_event(struct ath12k_base *ab, struct sk_buff *skb)
 	if (rx_ev.status & WMI_RX_STATUS_ERR_MIC)
 		status->flag |= RX_FLAG_MMIC_ERROR;
 
-	if (rx_ev.chan_freq >= ATH12K_MIN_6G_FREQ) {
+	if (rx_ev.chan_freq >= ATH12K_MIN_6G_FREQ &&
+	    rx_ev.chan_freq <= ATH12K_MAX_6G_FREQ) {
 		status->band = NL80211_BAND_6GHZ;
+		status->freq = rx_ev.chan_freq;
 	} else if (rx_ev.channel >= 1 && rx_ev.channel <= 14) {
 		status->band = NL80211_BAND_2GHZ;
 	} else if (rx_ev.channel >= 36 && rx_ev.channel <= ATH12K_MAX_5G_CHAN) {
@@ -5899,8 +5901,10 @@  static void ath12k_mgmt_rx_event(struct ath12k_base *ab, struct sk_buff *skb)
 
 	sband = &ar->mac.sbands[status->band];
 
-	status->freq = ieee80211_channel_to_frequency(rx_ev.channel,
-						      status->band);
+	if (status->band != NL80211_BAND_6GHZ)
+		status->freq = ieee80211_channel_to_frequency(rx_ev.channel,
+							      status->band);
+
 	status->signal = rx_ev.snr + ATH12K_DEFAULT_NOISE_FLOOR;
 	status->rate_idx = ath12k_mac_bitrate_to_idx(sband, rx_ev.rate / 100);