| Message ID | 20240508002055.17705-7-quic_pradeepc@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | wifi: ath12k: add MU-MIMO and 160 MHz bandwidth support | expand |
On 5/7/2024 5:20 PM, Pradeep Kumar Chitrapu wrote: > Currently, the TX and RX MCS rate configurations per peer are > reversed when sent to the firmware. As a result, RX MCS rates > are configured for TX, and vice versa. This commit rectifies > the configuration to match what the firmware expects. > > Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 > > Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") > Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c index 7a52d2082b79..376d81c7550d 100644 --- a/drivers/net/wireless/ath/ath12k/wmi.c +++ b/drivers/net/wireless/ath/ath12k/wmi.c @@ -2112,8 +2112,8 @@ int ath12k_wmi_send_peer_assoc_cmd(struct ath12k *ar, he_mcs->tlv_header = ath12k_wmi_tlv_cmd_hdr(WMI_TAG_HE_RATE_SET, sizeof(*he_mcs)); - he_mcs->rx_mcs_set = cpu_to_le32(arg->peer_he_rx_mcs_set[i]); - he_mcs->tx_mcs_set = cpu_to_le32(arg->peer_he_tx_mcs_set[i]); + he_mcs->rx_mcs_set = cpu_to_le32(arg->peer_he_tx_mcs_set[i]); + he_mcs->tx_mcs_set = cpu_to_le32(arg->peer_he_rx_mcs_set[i]); ptr += sizeof(*he_mcs); } diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h index 161e0ab5efe8..97500195ca85 100644 --- a/drivers/net/wireless/ath/ath12k/wmi.h +++ b/drivers/net/wireless/ath/ath12k/wmi.h @@ -3886,7 +3886,9 @@ struct ath12k_wmi_vht_rate_set_params { struct ath12k_wmi_he_rate_set_params { __le32 tlv_header; + /* MCS at which the peer can receive */ __le32 rx_mcs_set; + /* MCS at which the peer can transmit */ __le32 tx_mcs_set; } __packed;
Currently, the TX and RX MCS rate configurations per peer are reversed when sent to the firmware. As a result, RX MCS rates are configured for TX, and vice versa. This commit rectifies the configuration to match what the firmware expects. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> --- drivers/net/wireless/ath/ath12k/wmi.c | 4 ++-- drivers/net/wireless/ath/ath12k/wmi.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-)