new file mode 100644
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/* Copyright (C) 2022-2024 Texas Instruments Inc.*/
+
+#include "cc33xx.h"
+#include "debug.h"
+#include "io.h"
+#include "tx.h"
+
+bool cc33xx_set_block_size(struct cc33xx *cc)
+{
+ if (cc->if_ops->set_block_size) {
+ cc->if_ops->set_block_size(cc->dev, CC33XX_BUS_BLOCK_SIZE);
+ cc33xx_debug(DEBUG_CC33xx,
+ "Set BLKsize to %d", CC33XX_BUS_BLOCK_SIZE);
+ return true;
+ }
+
+ cc33xx_debug(DEBUG_CC33xx, "Could not set BLKsize");
+ return false;
+}
+
+void cc33xx_disable_interrupts_nosync(struct cc33xx *cc)
+{
+ cc->if_ops->disable_irq(cc->dev);
+}
+
+void cc33xx_irq(void *cookie);
+void cc33xx_enable_interrupts(struct cc33xx *cc)
+{
+ cc->if_ops->enable_irq(cc->dev);
+
+ cc33xx_debug(DEBUG_CC33xx, "IBI_WA: Read core status");
+ cc33xx_irq(cc);
+ cc33xx_debug(DEBUG_CC33xx, "IBI_WA: Core status processed");
+}
+
+void cc33xx_io_reset(struct cc33xx *cc)
+{
+ if (cc->if_ops->reset)
+ cc->if_ops->reset(cc->dev);
+}
+
+void cc33xx_io_init(struct cc33xx *cc)
+{
+ if (cc->if_ops->init)
+ cc->if_ops->init(cc->dev);
+}
+
+/* Raw target IO, address is not translated */
+static int __must_check cc33xx_raw_write(struct cc33xx *cc, int addr,
+ void *buf, size_t len, bool fixed)
+{
+ int ret;
+
+ if (test_bit(CC33XX_FLAG_IO_FAILED, &cc->flags) ||
+ WARN_ON((test_bit(CC33XX_FLAG_IN_ELP, &cc->flags) &&
+ addr != HW_ACCESS_ELP_CTRL_REG)))
+ return -EIO;
+
+ ret = cc->if_ops->write(cc->dev, addr, buf, len, fixed);
+ if (ret && cc->state != CC33XX_STATE_OFF)
+ set_bit(CC33XX_FLAG_IO_FAILED, &cc->flags);
+
+ return ret;
+}
+
+int __must_check cc33xx_raw_read(struct cc33xx *cc, int addr,
+ void *buf, size_t len, bool fixed)
+{
+ int ret;
+
+ if (test_bit(CC33XX_FLAG_IO_FAILED, &cc->flags) ||
+ WARN_ON((test_bit(CC33XX_FLAG_IN_ELP, &cc->flags) &&
+ addr != HW_ACCESS_ELP_CTRL_REG)))
+ return -EIO;
+
+ ret = cc->if_ops->read(cc->dev, addr, buf, len, fixed);
+ if (ret && cc->state != CC33XX_STATE_OFF)
+ set_bit(CC33XX_FLAG_IO_FAILED, &cc->flags);
+
+ return ret;
+}
+
+int __must_check cc33xx_write(struct cc33xx *cc, int addr,
+ void *buf, size_t len, bool fixed)
+{
+ return cc33xx_raw_write(cc, addr, buf, len, fixed);
+}
+
+void claim_core_status_lock(struct cc33xx *cc)
+{
+ /* When accessing core-status data (read or write) the transport lock
+ * should be held.
+ */
+ cc->if_ops->interface_claim(cc->dev);
+}
+
+void release_core_status_lock(struct cc33xx *cc)
+{
+ /* After accessing core-status data (read or write) the transport lock
+ * should be released.
+ */
+ cc->if_ops->interface_release(cc->dev);
+}
+
+void cc33xx_power_off(struct cc33xx *cc)
+{
+ int ret = 0;
+
+ if (!test_bit(CC33XX_FLAG_GPIO_POWER, &cc->flags))
+ return;
+
+ if (cc->if_ops->power)
+ ret = cc->if_ops->power(cc->dev, false);
+ if (!ret)
+ clear_bit(CC33XX_FLAG_GPIO_POWER, &cc->flags);
+}
+
+int cc33xx_power_on(struct cc33xx *cc)
+{
+ int ret = 0;
+
+ if (cc->if_ops->power)
+ ret = cc->if_ops->power(cc->dev, true);
+ if (ret == 0)
+ set_bit(CC33XX_FLAG_GPIO_POWER, &cc->flags);
+
+ return ret;
+}
new file mode 100644
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/* Copyright (C) 2022-2024 Texas Instruments Inc.*/
+
+#ifndef __IO_H__
+#define __IO_H__
+
+struct cc33xx;
+
+void cc33xx_disable_interrupts_nosync(struct cc33xx *cc);
+void cc33xx_enable_interrupts(struct cc33xx *cc);
+void cc33xx_io_reset(struct cc33xx *cc);
+void cc33xx_io_init(struct cc33xx *cc);
+int __must_check cc33xx_raw_read(struct cc33xx *cc, int addr,
+ void *buf, size_t len, bool fixed);
+int __must_check cc33xx_write(struct cc33xx *cc, int addr,
+ void *buf, size_t len, bool fixed);
+void claim_core_status_lock(struct cc33xx *cc);
+void release_core_status_lock(struct cc33xx *cc);
+void cc33xx_power_off(struct cc33xx *cc);
+int cc33xx_power_on(struct cc33xx *cc);
+int cc33xx_translate_addr(struct cc33xx *cc, int addr);
+bool cc33xx_set_block_size(struct cc33xx *cc);
+
+#endif /* __IO_H__ */
new file mode 100644
@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/* Copyright (C) 2022-2024 Texas Instruments Inc.*/
+
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/host.h>
+#include <linux/gpio.h>
+#include <linux/pm_runtime.h>
+#include <linux/of_irq.h>
+
+#include "cc33xx.h"
+#include "io.h"
+
+#ifndef SDIO_VENDOR_ID_TI
+#define SDIO_VENDOR_ID_TI 0x0097
+#endif
+
+#define SDIO_DEVICE_ID_CC33XX_NO_EFUSE 0x4076
+#define SDIO_DEVICE_ID_TI_CC33XX 0x4077
+
+static bool dump;
+
+struct cc33xx_sdio_glue {
+ struct device *dev;
+ struct platform_device *core;
+};
+
+static const struct sdio_device_id cc33xx_devices[] = {
+ { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_CC33XX) },
+ { SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_CC33XX_NO_EFUSE) },
+ {}
+};
+MODULE_DEVICE_TABLE(sdio, cc33xx_devices);
+
+static void cc33xx_sdio_claim(struct device *child)
+{
+ struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent);
+ struct sdio_func *func = dev_to_sdio_func(glue->dev);
+
+ sdio_claim_host(func);
+}
+
+static void cc33xx_sdio_release(struct device *child)
+{
+ struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent);
+ struct sdio_func *func = dev_to_sdio_func(glue->dev);
+
+ sdio_release_host(func);
+}
+
+static void cc33xx_sdio_set_block_size(struct device *child,
+ unsigned int blksz)
+{
+ struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent);
+ struct sdio_func *func = dev_to_sdio_func(glue->dev);
+
+ sdio_claim_host(func);
+ sdio_set_block_size(func, blksz);
+ sdio_release_host(func);
+}
+
+static int __must_check cc33xx_sdio_raw_read(struct device *child, int addr,
+ void *buf, size_t len, bool fixed)
+{
+ int ret;
+ struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent);
+ struct sdio_func *func = dev_to_sdio_func(glue->dev);
+
+ sdio_claim_host(func);
+
+ if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) {
+ ((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
+ dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n",
+ addr, ((u8 *)buf)[0]);
+ } else {
+ if (fixed)
+ ret = sdio_readsb(func, buf, addr, len);
+ else
+ ret = sdio_memcpy_fromio(func, buf, addr, len);
+
+ dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n",
+ addr, len);
+ }
+
+ sdio_release_host(func);
+
+ if (WARN_ON(ret))
+ dev_err(child->parent, "sdio read failed (%d)\n", ret);
+
+ if (unlikely(dump)) {
+ dev_dbg(glue->dev, "cc33xx_sdio: READ from 0x%04x\n", addr);
+ print_hex_dump(KERN_DEBUG, "cc33xx_sdio: READ ",
+ DUMP_PREFIX_OFFSET, 16, 1, buf, len, false);
+ }
+
+ return ret;
+}
+
+static int __must_check cc33xx_sdio_raw_write(struct device *child, int addr,
+ void *buf, size_t len, bool fixed)
+{
+ int ret;
+ struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent);
+ struct sdio_func *func = dev_to_sdio_func(glue->dev);
+
+ sdio_claim_host(func);
+
+ if (unlikely(dump)) {
+ dev_dbg(child->parent, "cc33xx_sdio: WRITE to 0x%04x length 0x%x (first 64 Bytes):\n",
+ addr, len);
+ print_hex_dump(KERN_DEBUG, "cc33xx_sdio: WRITE ",
+ DUMP_PREFIX_OFFSET, 16, 1, buf,
+ min(len, (size_t)64), false);
+ }
+
+ if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) {
+ sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret);
+ dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n",
+ addr, ((u8 *)buf)[0]);
+ } else {
+ dev_dbg(child->parent, "sdio write 53 addr 0x%x, %zu bytes\n",
+ addr, len);
+
+ if (fixed)
+ ret = sdio_writesb(func, addr, buf, len);
+ else
+ ret = sdio_memcpy_toio(func, addr, buf, len);
+ }
+
+ sdio_release_host(func);
+
+ if (WARN_ON(ret))
+ dev_err(child->parent, "sdio write failed (%d)\n", ret);
+
+ return ret;
+}
+
+static int cc33xx_sdio_power_on(struct cc33xx_sdio_glue *glue)
+{
+ int ret;
+ struct sdio_func *func = dev_to_sdio_func(glue->dev);
+ struct mmc_card *card = func->card;
+
+ ret = pm_runtime_get_sync(&card->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(&card->dev);
+ dev_err(glue->dev, "%s: failed to get_sync(%d)\n",
+ __func__, ret);
+
+ return ret;
+ }
+
+ sdio_claim_host(func);
+ sdio_enable_func(func);
+ sdio_release_host(func);
+
+ return 0;
+}
+
+static int cc33xx_sdio_power_off(struct cc33xx_sdio_glue *glue)
+{
+ struct sdio_func *func = dev_to_sdio_func(glue->dev);
+ struct mmc_card *card = func->card;
+
+ sdio_claim_host(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+
+ /* Let runtime PM know the card is powered off */
+ pm_runtime_put(&card->dev);
+ return 0;
+}
+
+static int cc33xx_sdio_set_power(struct device *child, bool enable)
+{
+ struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent);
+
+ if (enable)
+ return cc33xx_sdio_power_on(glue);
+ else
+ return cc33xx_sdio_power_off(glue);
+}
+
+/**
+ * inband_irq_handler - Called from the MMC subsystem when the
+ * function's IRQ is signaled.
+ * @func: an SDIO function of the card
+ *
+ * Note that the host is already claimed when handler is invoked.
+ */
+static void inband_irq_handler(struct sdio_func *func)
+{
+ struct cc33xx_sdio_glue *glue = sdio_get_drvdata(func);
+ struct platform_device *pdev = glue->core;
+ struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
+
+ dev_dbg(glue->dev, "Inband SDIO IRQ");
+
+ if (WARN_ON(!pdev_data->irq_handler))
+ return;
+
+ pdev_data->irq_handler(pdev);
+}
+
+static void cc33xx_enable_async_interrupt(struct sdio_func *func)
+{
+ u8 reg_val;
+ const int CCCR_REG_16_ADDR = 0x16;
+ const int ENABLE_ASYNC_IRQ_BIT = BIT(1);
+
+ reg_val = sdio_f0_readb(func, CCCR_REG_16_ADDR, NULL);
+ reg_val |= ENABLE_ASYNC_IRQ_BIT;
+ sdio_f0_writeb(func, reg_val, CCCR_REG_16_ADDR, NULL);
+}
+
+static void cc33xx_sdio_enable_irq(struct device *child)
+{
+ struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent);
+ struct sdio_func *func = dev_to_sdio_func(glue->dev);
+
+ sdio_claim_host(func);
+ cc33xx_enable_async_interrupt(func);
+ sdio_claim_irq(func, inband_irq_handler);
+ sdio_release_host(func);
+}
+
+static void cc33xx_sdio_disable_irq(struct device *child)
+{
+ struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent);
+ struct sdio_func *func = dev_to_sdio_func(glue->dev);
+
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_release_host(func);
+}
+
+static void cc33xx_enable_line_irq(struct device *child)
+{
+ struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent);
+ struct platform_device *pdev = glue->core;
+ struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
+
+ enable_irq(pdev_data->gpio_irq_num);
+}
+
+static void cc33xx_disable_line_irq(struct device *child)
+{
+ struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent);
+ struct platform_device *pdev = glue->core;
+ struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
+
+ disable_irq_nosync(pdev_data->gpio_irq_num);
+}
+
+static void cc33xx_set_irq_handler(struct device *child, void *handler)
+{
+ struct cc33xx_sdio_glue *glue = dev_get_drvdata(child->parent);
+ struct platform_device *pdev = glue->core;
+ struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
+
+ pdev_data->irq_handler = handler;
+}
+
+static struct cc33xx_if_operations sdio_ops_gpio_irq = {
+ .interface_claim = cc33xx_sdio_claim,
+ .interface_release = cc33xx_sdio_release,
+ .read = cc33xx_sdio_raw_read,
+ .write = cc33xx_sdio_raw_write,
+ .power = cc33xx_sdio_set_power,
+ .set_block_size = cc33xx_sdio_set_block_size,
+ .set_irq_handler = cc33xx_set_irq_handler,
+ .disable_irq = cc33xx_disable_line_irq,
+ .enable_irq = cc33xx_enable_line_irq,
+};
+
+static struct cc33xx_if_operations sdio_ops_inband_irq = {
+ .interface_claim = cc33xx_sdio_claim,
+ .interface_release = cc33xx_sdio_release,
+ .read = cc33xx_sdio_raw_read,
+ .write = cc33xx_sdio_raw_write,
+ .power = cc33xx_sdio_set_power,
+ .set_block_size = cc33xx_sdio_set_block_size,
+ .set_irq_handler = cc33xx_set_irq_handler,
+ .disable_irq = cc33xx_sdio_disable_irq,
+ .enable_irq = cc33xx_sdio_enable_irq,
+};
+
+#ifdef CONFIG_OF
+static const struct cc33xx_family_data cc33xx_data = {
+ .name = "cc33xx",
+ .cfg_name = "ti-connectivity/cc33xx-conf.bin",
+ .nvs_name = "ti-connectivity/cc33xx-nvs.bin",
+};
+
+static const struct of_device_id cc33xx_sdio_of_match_table[] = {
+ { .compatible = "ti,cc33xx", .data = &cc33xx_data },
+ { }
+};
+
+static int cc33xx_probe_of(struct device *dev, int *irq, int *wakeirq,
+ struct cc33xx_platdev_data *pdev_data)
+{
+ struct device_node *np = dev->of_node;
+ const struct of_device_id *of_id;
+
+ of_id = of_match_node(cc33xx_sdio_of_match_table, np);
+ if (!of_id)
+ return -ENODEV;
+
+ pdev_data->family = of_id->data;
+
+ *irq = irq_of_parse_and_map(np, 0);
+
+ *wakeirq = irq_of_parse_and_map(np, 1);
+
+ return 0;
+}
+#else
+static int cc33xx_probe_of(struct device *dev, int *irq, int *wakeirq,
+ struct cc33xx_platdev_data *pdev_data)
+{
+ return -ENODATA;
+}
+#endif /* CONFIG_OF */
+
+static irqreturn_t gpio_irq_hard_handler(int irq, void *cookie)
+{
+ return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t gpio_irq_thread_handler(int irq, void *cookie)
+{
+ struct sdio_func *func = cookie;
+ struct cc33xx_sdio_glue *glue = sdio_get_drvdata(func);
+ struct platform_device *pdev = glue->core;
+ struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
+
+ if (WARN_ON(!pdev_data->irq_handler))
+ return IRQ_HANDLED;
+
+ pdev_data->irq_handler(pdev);
+
+ return IRQ_HANDLED;
+}
+
+static int sdio_cc33xx_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ struct cc33xx_platdev_data *pdev_data;
+ struct cc33xx_sdio_glue *glue;
+ struct resource res[1];
+ mmc_pm_flag_t mmcflags;
+ int ret = -ENOMEM;
+ int gpio_irq, wakeirq, irq_flags;
+ const char *chip_family;
+
+ /* We are only able to handle the wlan function */
+ if (func->num != 0x02)
+ return -ENODEV;
+
+ pdev_data = devm_kzalloc(&func->dev, sizeof(*pdev_data), GFP_KERNEL);
+ if (!pdev_data)
+ return -ENOMEM;
+
+ glue = devm_kzalloc(&func->dev, sizeof(*glue), GFP_KERNEL);
+ if (!glue)
+ return -ENOMEM;
+
+ glue->dev = &func->dev;
+
+ /* Grab access to FN0 for ELP reg. */
+ func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+
+ /* Use block mode for transferring over one block size of data */
+ func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+
+ ret = cc33xx_probe_of(&func->dev, &gpio_irq, &wakeirq, pdev_data);
+ if (ret)
+ goto out;
+
+ /* if sdio can keep power while host is suspended, enable wow */
+ mmcflags = sdio_get_host_pm_caps(func);
+ dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags);
+
+ sdio_set_drvdata(func, glue);
+
+ /* Tell PM core that we don't need the card to be powered now */
+ pm_runtime_put_noidle(&func->dev);
+
+ chip_family = "cc33xx";
+
+ glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO);
+ if (!glue->core) {
+ dev_err(glue->dev, "can't allocate platform_device");
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ glue->core->dev.parent = &func->dev;
+
+ if (gpio_irq) {
+ dev_info(glue->dev, "Using GPIO as IRQ\n");
+
+ irq_flags = irqd_get_trigger_type(irq_get_irq_data(gpio_irq));
+
+ irq_set_status_flags(gpio_irq, IRQ_NOAUTOEN);
+
+ if (irq_flags & (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW))
+ irq_flags |= IRQF_ONESHOT;
+
+ ret = request_threaded_irq(gpio_irq, gpio_irq_hard_handler,
+ gpio_irq_thread_handler,
+ irq_flags, glue->core->name, func);
+ if (ret) {
+ dev_err(glue->dev, "can't register GPIO IRQ handler\n");
+ goto out_dev_put;
+ }
+
+ pdev_data->gpio_irq_num = gpio_irq;
+
+ if ((mmcflags & MMC_PM_KEEP_POWER) &&
+ (enable_irq_wake(gpio_irq) == 0))
+ pdev_data->pwr_in_suspend = true;
+
+ pdev_data->if_ops = &sdio_ops_gpio_irq;
+ } else {
+ dev_info(glue->dev, "Using SDIO in-band IRQ\n");
+
+ pdev_data->if_ops = &sdio_ops_inband_irq;
+ }
+
+ if (wakeirq > 0) {
+ res[0].start = wakeirq;
+ res[0].flags = IORESOURCE_IRQ |
+ irqd_get_trigger_type(irq_get_irq_data(wakeirq));
+ res[0].name = "wakeirq";
+
+ ret = platform_device_add_resources(glue->core, res, 1);
+ if (ret) {
+ dev_err(glue->dev, "can't add resources\n");
+ goto out_dev_put;
+ }
+ }
+
+ ret = platform_device_add_data(glue->core, pdev_data,
+ sizeof(*pdev_data));
+ if (ret) {
+ dev_err(glue->dev, "can't add platform data\n");
+ goto out_dev_put;
+ }
+
+ ret = platform_device_add(glue->core);
+ if (ret) {
+ dev_err(glue->dev, "can't add platform device\n");
+ goto out_dev_put;
+ }
+ return 0;
+
+out_dev_put:
+ platform_device_put(glue->core);
+
+out:
+ return ret;
+}
+
+static void sdio_cc33xx_remove(struct sdio_func *func)
+{
+ struct cc33xx_sdio_glue *glue = sdio_get_drvdata(func);
+ struct platform_device *pdev = glue->core;
+ struct cc33xx_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
+
+ /* Undo decrement done above in sdio_cc33xx_probe */
+ pm_runtime_get_noresume(&func->dev);
+
+ platform_device_unregister(glue->core);
+
+ if (pdev_data->gpio_irq_num) {
+ free_irq(pdev_data->gpio_irq_num, func);
+ if (pdev_data->pwr_in_suspend)
+ disable_irq_wake(pdev_data->gpio_irq_num);
+ } else {
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_release_host(func);
+ }
+}
+
+#ifdef CONFIG_PM
+static int cc33xx_suspend(struct device *dev)
+{
+ /* Tell MMC/SDIO core it's OK to power down the card
+ * (if it isn't already), but not to remove it completely
+ */
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ struct cc33xx_sdio_glue *glue = sdio_get_drvdata(func);
+ struct cc33xx *cc = platform_get_drvdata(glue->core);
+ mmc_pm_flag_t sdio_flags;
+ int ret = 0;
+
+ if (!cc) {
+ dev_err(dev, "no wilink module was probed\n");
+ goto out;
+ }
+
+ dev_dbg(dev, "cc33xx suspend. keep_device_power: %d\n",
+ cc->keep_device_power);
+
+ if (cc->keep_device_power) {
+ sdio_flags = sdio_get_host_pm_caps(func);
+
+ if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
+ dev_err(dev, "can't keep power while host is suspended\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* keep power while host suspended */
+ ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+ if (ret) {
+ dev_err(dev, "error while trying to keep power\n");
+ goto out;
+ }
+ }
+out:
+ return ret;
+}
+
+static int cc33xx_resume(struct device *dev)
+{
+ dev_dbg(dev, "cc33xx resume\n");
+
+ return 0;
+}
+
+static const struct dev_pm_ops cc33xx_sdio_pm_ops = {
+ .suspend = cc33xx_suspend,
+ .resume = cc33xx_resume,
+};
+
+static struct sdio_driver cc33xx_sdio_driver = {
+ .name = "cc33xx_sdio",
+ .id_table = cc33xx_devices,
+ .probe = sdio_cc33xx_probe,
+ .remove = sdio_cc33xx_remove,
+ .drv = {
+ .pm = &cc33xx_sdio_pm_ops,
+ },
+};
+#else
+static struct sdio_driver cc33xx_sdio_driver = {
+ .name = "cc33xx_sdio",
+ .id_table = cc33xx_devices,
+ .probe = sdio_cc33xx_probe,
+ .remove = sdio_cc33xx_remove,
+};
+#endif /* CONFIG_PM */
+
+static int __init sdio_cc33xx_init(void)
+{
+ return sdio_register_driver(&cc33xx_sdio_driver);
+}
+
+static void __exit sdio_cc33xx_exit(void)
+{
+ sdio_unregister_driver(&cc33xx_sdio_driver);
+}
+
+module_init(sdio_cc33xx_init);
+module_exit(sdio_cc33xx_exit);
+
+module_param(dump, bool, 0600);
+MODULE_PARM_DESC(dump, "Enable sdio read/write dumps.");
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Michael Nemanov <michael.nemanov@ti.com>");
+MODULE_AUTHOR("Sabeeh Khan <sabeeh-khan@ti.com>");