diff mbox series

[V6,08/10] wifi: ath12k: clean up 80P80 support

Message ID 20240515181327.12855-9-quic_pradeepc@quicinc.com (mailing list archive)
State Superseded
Delegated to: Kalle Valo
Headers show
Series wifi: ath12k: add MU-MIMO and 160 MHz bandwidth support | expand

Commit Message

Pradeep Kumar Chitrapu May 15, 2024, 6:13 p.m. UTC
Clean up unused 80P80 references as hardware does not support
it. This is applicable to both QCN9274 and WCN7850.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/mac.c | 51 ++++++---------------------
 drivers/net/wireless/ath/ath12k/wmi.c |  5 +--
 drivers/net/wireless/ath/ath12k/wmi.h |  1 -
 3 files changed, 11 insertions(+), 46 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 97161c430a08..25a03f4946b5 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -199,7 +199,7 @@  ath12k_phymodes[NUM_NL80211_BANDS][ATH12K_CHAN_WIDTH_NUM] = {
 			[NL80211_CHAN_WIDTH_40] = MODE_11BE_EHT40,
 			[NL80211_CHAN_WIDTH_80] = MODE_11BE_EHT80,
 			[NL80211_CHAN_WIDTH_160] = MODE_11BE_EHT160,
-			[NL80211_CHAN_WIDTH_80P80] = MODE_11BE_EHT80_80,
+			[NL80211_CHAN_WIDTH_80P80] = MODE_UNKNOWN,
 			[NL80211_CHAN_WIDTH_320] = MODE_11BE_EHT320,
 	},
 	[NL80211_BAND_6GHZ] = {
@@ -210,7 +210,7 @@  ath12k_phymodes[NUM_NL80211_BANDS][ATH12K_CHAN_WIDTH_NUM] = {
 			[NL80211_CHAN_WIDTH_40] = MODE_11BE_EHT40,
 			[NL80211_CHAN_WIDTH_80] = MODE_11BE_EHT80,
 			[NL80211_CHAN_WIDTH_160] = MODE_11BE_EHT160,
-			[NL80211_CHAN_WIDTH_80P80] = MODE_11BE_EHT80_80,
+			[NL80211_CHAN_WIDTH_80P80] = MODE_UNKNOWN,
 			[NL80211_CHAN_WIDTH_320] = MODE_11BE_EHT320,
 	},
 
@@ -2138,17 +2138,6 @@  static void ath12k_peer_assoc_h_he(struct ath12k *ar,
 
 	switch (sta->deflink.bandwidth) {
 	case IEEE80211_STA_RX_BW_160:
-		if (he_cap->he_cap_elem.phy_cap_info[0] &
-		    IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G) {
-			v = ath12k_peer_assoc_h_he_limit(v, he_mcs_mask);
-			arg->peer_he_rx_mcs_set[WMI_HECAP_TXRX_MCS_NSS_IDX_80_80] = v;
-
-			v = le16_to_cpu(he_cap->he_mcs_nss_supp.tx_mcs_80p80);
-			arg->peer_he_tx_mcs_set[WMI_HECAP_TXRX_MCS_NSS_IDX_80_80] = v;
-
-			arg->peer_he_mcs_count++;
-			he_tx_mcs = v;
-		}
 		v = le16_to_cpu(he_cap->he_mcs_nss_supp.rx_mcs_160);
 		arg->peer_he_rx_mcs_set[WMI_HECAP_TXRX_MCS_NSS_IDX_160] = v;
 
@@ -2335,16 +2324,11 @@  static enum wmi_phy_mode ath12k_mac_get_phymode_vht(struct ath12k *ar,
 						    struct ieee80211_sta *sta)
 {
 	if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_160) {
-		switch (sta->deflink.vht_cap.cap &
-			IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
-		case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
-			return MODE_11AC_VHT160;
-		case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ:
-			return MODE_11AC_VHT80_80;
-		default:
-			/* not sure if this is a valid case? */
+		if (sta->deflink.vht_cap.cap &
+		    IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ)
 			return MODE_11AC_VHT160;
-		}
+
+		return MODE_UNKNOWN;
 	}
 
 	if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_80)
@@ -2366,11 +2350,8 @@  static enum wmi_phy_mode ath12k_mac_get_phymode_he(struct ath12k *ar,
 		if (sta->deflink.he_cap.he_cap_elem.phy_cap_info[0] &
 		     IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)
 			return MODE_11AX_HE160;
-		else if (sta->deflink.he_cap.he_cap_elem.phy_cap_info[0] &
-		     IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)
-			return MODE_11AX_HE80_80;
-		/* not sure if this is a valid case? */
-		return MODE_11AX_HE160;
+
+		return MODE_UNKNOWN;
 	}
 
 	if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_80)
@@ -2398,14 +2379,7 @@  static enum wmi_phy_mode ath12k_mac_get_phymode_eht(struct ath12k *ar,
 		    IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)
 			return MODE_11BE_EHT160;
 
-		if (sta->deflink.he_cap.he_cap_elem.phy_cap_info[0] &
-			 IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)
-			return MODE_11BE_EHT80_80;
-
-		ath12k_warn(ar->ab, "invalid EHT PHY capability info for 160 Mhz: %d\n",
-			    sta->deflink.he_cap.he_cap_elem.phy_cap_info[0]);
-
-		return MODE_11BE_EHT160;
+		return MODE_UNKNOWN;
 	}
 
 	if (sta->deflink.bandwidth == IEEE80211_STA_RX_BW_80)
@@ -5449,8 +5423,6 @@  static void ath12k_mac_set_hemcsmap(struct ath12k *ar,
 	mcs_nss->tx_mcs_80 = cpu_to_le16(txmcs_map & 0xffff);
 	mcs_nss->rx_mcs_160 = cpu_to_le16(rxmcs_map & 0xffff);
 	mcs_nss->tx_mcs_160 = cpu_to_le16(txmcs_map & 0xffff);
-	mcs_nss->rx_mcs_80p80 = cpu_to_le16(rxmcs_map & 0xffff);
-	mcs_nss->tx_mcs_80p80 = cpu_to_le16(txmcs_map & 0xffff);
 }
 
 static void ath12k_mac_copy_he_cap(struct ath12k *ar,
@@ -5472,6 +5444,7 @@  static void ath12k_mac_copy_he_cap(struct ath12k *ar,
 		IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G |
 		IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
 		IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G;
+	/* 80PLUS80 is not supported */
 	he_cap_elem->phy_cap_info[0] &=
 		~IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G;
 	he_cap_elem->phy_cap_info[5] &=
@@ -7988,10 +7961,6 @@  ath12k_mac_has_single_legacy_rate(struct ath12k *ar,
 static __le16
 ath12k_mac_get_tx_mcs_map(const struct ieee80211_sta_he_cap *he_cap)
 {
-	if (he_cap->he_cap_elem.phy_cap_info[0] &
-	    IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)
-		return he_cap->he_mcs_nss_supp.tx_mcs_80p80;
-
 	if (he_cap->he_cap_elem.phy_cap_info[0] &
 	    IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)
 		return he_cap->he_mcs_nss_supp.tx_mcs_160;
diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index 7bf01cca327a..7c958de83d03 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -978,10 +978,7 @@  static void ath12k_wmi_put_wmi_channel(struct ath12k_wmi_channel_params *chan,
 
 	chan->mhz = cpu_to_le32(arg->freq);
 	chan->band_center_freq1 = cpu_to_le32(arg->band_center_freq1);
-	if (arg->mode == MODE_11AC_VHT80_80)
-		chan->band_center_freq2 = cpu_to_le32(arg->band_center_freq2);
-	else
-		chan->band_center_freq2 = 0;
+	chan->band_center_freq2 = 0;
 
 	chan->info |= le32_encode_bits(arg->mode, WMI_CHAN_INFO_MODE);
 	if (arg->passive)
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 6627e2ceb6a9..49f485477d41 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -3590,7 +3590,6 @@  struct wmi_vdev_install_key_arg {
 #define WMI_HOST_MAX_HE_RATE_SET		3
 #define WMI_HECAP_TXRX_MCS_NSS_IDX_80		0
 #define WMI_HECAP_TXRX_MCS_NSS_IDX_160		1
-#define WMI_HECAP_TXRX_MCS_NSS_IDX_80_80	2
 
 struct wmi_rate_set_arg {
 	u32 num_rates;