| Message ID | 20240801112853.85508-3-quic_lingbok@quicinc.com (mailing list archive) |
|---|---|
| State | Deferred |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | wifi: ath12k: report station mode stats | expand |
On 8/1/2024 4:28 AM, Lingbo Kong wrote: > Currently, the receive rate of EHT of "iw dev xxx station dump" command > always show an invalid value. > > This is because ath12k does not pass information about the rx_status of EHT > to mac80211. So, mac80211 not calculate the receive rate. > > To address this issue, add logic for handling rx_status of EHT to the > ath12k_dp_rx_h_rate() function. > > After that, "iw dev xxx station dump" show the correct receive rate. > Such as: > > Station 00:03:7f:12:03:03 (on wlo1) > inactive time: 48 ms > rx bytes: 59226 > rx packets: 320 > tx bytes: 26556 > tx packets: 191 > tx retries: 99 > tx failed: 0 > beacon loss: 0 > beacon rx: 79 > rx drop misc: 68 > signal: -95 dBm > beacon signal avg: -20 dBm > tx bitrate: 688.2 MBit/s 40MHz EHT-MCS 13 EHT-NSS 2 EHT-GI 0 > tx duration: 0 us > rx bitrate: 619.5 MBit/s 40MHz EHT-MCS 8 EHT-NSS 3 EHT-GI 0 > > This patch affects the station mode of WCN7850 and QCN9274. > > Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 > Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.2.1-00201-QCAHKSWPL_SILICONZ-1 > > Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c index 9ae579e50557..d69918ed813c 100644 --- a/drivers/net/wireless/ath/ath12k/dp_rx.c +++ b/drivers/net/wireless/ath/ath12k/dp_rx.c @@ -2341,6 +2341,23 @@ static void ath12k_dp_rx_h_rate(struct ath12k *ar, struct hal_rx_desc *rx_desc, rx_status->he_gi = ath12k_he_gi_to_nl80211_he_gi(sgi); rx_status->bw = ath12k_mac_bw_to_mac80211_bw(bw); break; + case RX_MSDU_START_PKT_TYPE_11BE: + rx_status->rate_idx = rate_mcs; + + if (rate_mcs > ATH12K_EHT_MCS_MAX) { + ath12k_warn(ar->ab, + "Received with invalid mcs in EHT mode %d\n", + rate_mcs); + break; + } + + rx_status->encoding = RX_ENC_EHT; + rx_status->nss = nss; + rx_status->eht.gi = ath12k_mac_eht_gi_to_nl80211_eht_gi(sgi); + rx_status->bw = ath12k_mac_bw_to_mac80211_bw(bw); + break; + default: + break; } } @@ -2430,7 +2447,7 @@ static void ath12k_dp_rx_deliver_msdu(struct ath12k *ar, struct napi_struct *nap spin_unlock_bh(&ab->base_lock); ath12k_dbg(ab, ATH12K_DBG_DATA, - "rx skb %p len %u peer %pM %d %s sn %u %s%s%s%s%s%s%s%s%s rate_idx %u vht_nss %u freq %u band %u flag 0x%x fcs-err %i mic-err %i amsdu-more %i\n", + "rx skb %p len %u peer %pM %d %s sn %u %s%s%s%s%s%s%s%s%s%s rate_idx %u vht_nss %u freq %u band %u flag 0x%x fcs-err %i mic-err %i amsdu-more %i\n", msdu, msdu->len, peer ? peer->addr : NULL, @@ -2441,6 +2458,7 @@ static void ath12k_dp_rx_deliver_msdu(struct ath12k *ar, struct napi_struct *nap (status->encoding == RX_ENC_HT) ? "ht" : "", (status->encoding == RX_ENC_VHT) ? "vht" : "", (status->encoding == RX_ENC_HE) ? "he" : "", + (status->encoding == RX_ENC_EHT) ? "eht" : "", (status->bw == RATE_INFO_BW_40) ? "40" : "", (status->bw == RATE_INFO_BW_80) ? "80" : "", (status->bw == RATE_INFO_BW_160) ? "160" : "", diff --git a/drivers/net/wireless/ath/ath12k/rx_desc.h b/drivers/net/wireless/ath/ath12k/rx_desc.h index 9d9d7e936cbc..9d1f85956454 100644 --- a/drivers/net/wireless/ath/ath12k/rx_desc.h +++ b/drivers/net/wireless/ath/ath12k/rx_desc.h @@ -637,6 +637,8 @@ enum rx_msdu_start_pkt_type { RX_MSDU_START_PKT_TYPE_11N, RX_MSDU_START_PKT_TYPE_11AC, RX_MSDU_START_PKT_TYPE_11AX, + RX_MSDU_START_PKT_TYPE_11BA, + RX_MSDU_START_PKT_TYPE_11BE, }; enum rx_msdu_start_sgi {
Currently, the receive rate of EHT of "iw dev xxx station dump" command always show an invalid value. This is because ath12k does not pass information about the rx_status of EHT to mac80211. So, mac80211 not calculate the receive rate. To address this issue, add logic for handling rx_status of EHT to the ath12k_dp_rx_h_rate() function. After that, "iw dev xxx station dump" show the correct receive rate. Such as: Station 00:03:7f:12:03:03 (on wlo1) inactive time: 48 ms rx bytes: 59226 rx packets: 320 tx bytes: 26556 tx packets: 191 tx retries: 99 tx failed: 0 beacon loss: 0 beacon rx: 79 rx drop misc: 68 signal: -95 dBm beacon signal avg: -20 dBm tx bitrate: 688.2 MBit/s 40MHz EHT-MCS 13 EHT-NSS 2 EHT-GI 0 tx duration: 0 us rx bitrate: 619.5 MBit/s 40MHz EHT-MCS 8 EHT-NSS 3 EHT-GI 0 This patch affects the station mode of WCN7850 and QCN9274. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.2.1-00201-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> --- v7: no change v6: 1.rebase against wifi: ath12k: prepare sta data structure for MLO handling v5: no change v4: no change v3: no change v2: no change drivers/net/wireless/ath/ath12k/dp_rx.c | 20 +++++++++++++++++++- drivers/net/wireless/ath/ath12k/rx_desc.h | 2 ++ 2 files changed, 21 insertions(+), 1 deletion(-)