diff mbox series

[v7,3/5] arm64: dts: rockchip: Add AP6275P wireless support to Khadas Edge 2

Message ID 20240802025715.2360456-4-jacobe.zang@wesion.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series Add AP6275P wireless support | expand

Commit Message

Jacobe Zang Aug. 2, 2024, 2:57 a.m. UTC
Khadas Edge2 uses the PCI-e Ampak AP6275P 2T2R Wi-Fi 6 module. The
pcie@0 node can be used as Bridge1, so the wifi@0 node is used as a
device under the Bridge1.

Co-developed-by: Muhammed Efe Cetin <efectn@protonmail.com>
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Change-Id: Id9ec7338a8e86ca8a404058d29af50dbc00df3b1
---
 .../boot/dts/rockchip/rk3588s-khadas-edge2.dts   | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
index dbddfc3bb4641..a3361ca25867d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts
@@ -283,6 +283,22 @@  &pcie2x1l2 {
 	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_pcie_wl>;
 	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x400000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+		device_type = "pci";
+		bus-range = <0x40 0x4f>;
+
+		wifi: wifi@0,0 {
+			compatible = "brcm,bcm4329-fmac", "pci14e4,449d";
+			reg = <0x410000 0 0 0 0>;
+			clocks = <&hym8563>;
+			clock-names = "lpo";
+		};
+	};
 };
 
 &pwm11 {