diff mbox series

[1/2] wifi: rtw89: adjust DIG threshold to reduce false alarm

Message ID 20240828055217.10263-2-pkshih@realtek.com (mailing list archive)
State Accepted
Delegated to: Ping-Ke Shih
Headers show
Series wifi: rtw89: refine two PHY features of DIG and RSSI | expand

Commit Message

Ping-Ke Shih Aug. 28, 2024, 5:52 a.m. UTC 
From: Eric Huang <echuang@realtek.com>

Use RSSI without subtracting offset as packet detection lower bound and
set an absolute minimal threshold. It's equivalent to setting a higher
noise floor, thereby reducing false alarm and improving interference
endurance.

Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw89/phy.c | 27 ++++++++++++++++--------
 1 file changed, 18 insertions(+), 9 deletions(-)

Comments

Ping-Ke Shih Sept. 5, 2024, 1:12 a.m. UTC | #1 
Ping-Ke Shih <pkshih@realtek.com> wrote:

> From: Eric Huang <echuang@realtek.com>
> 
> Use RSSI without subtracting offset as packet detection lower bound and
> set an absolute minimal threshold. It's equivalent to setting a higher
> noise floor, thereby reducing false alarm and improving interference
> endurance.
> 
> Signed-off-by: Eric Huang <echuang@realtek.com>
> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>

2 patch(es) applied to rtw-next branch of rtw.git, thanks.

9ecb64ed07ef wifi: rtw89: adjust DIG threshold to reduce false alarm
c9ac071e30ba wifi: rtw89: use frequency domain RSSI

---
https://github.com/pkshih/rtw.git
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw89/phy.c b/drivers/net/wireless/realtek/rtw89/phy.c
index 59b98aa876dd..c7165e757842 100644
--- a/drivers/net/wireless/realtek/rtw89/phy.c
+++ b/drivers/net/wireless/realtek/rtw89/phy.c
@@ -5401,7 +5401,7 @@  static void rtw89_phy_dig_update_para(struct rtw89_dev *rtwdev)
 	memcpy(dig->igi_rssi_th, igi_rssi_th, sizeof(dig->igi_rssi_th));
 }
 
-static const u8 pd_low_th_offset = 20, dynamic_igi_min = 0x20;
+static const u8 pd_low_th_offset = 16, dynamic_igi_min = 0x20;
 static const u8 igi_max_performance_mode = 0x5a;
 static const u8 dynamic_pd_threshold_max;
 
@@ -5699,38 +5699,47 @@  void rtw89_phy_dig_reset(struct rtw89_dev *rtwdev)
 }
 
 #define IGI_RSSI_MIN 10
+#define ABS_IGI_MIN 0xc
 void rtw89_phy_dig(struct rtw89_dev *rtwdev)
 {
 	struct rtw89_dig_info *dig = &rtwdev->dig;
 	bool is_linked = rtwdev->total_sta_assoc > 0;
+	u8 igi_min;
 
 	if (unlikely(dig->bypass_dig)) {
 		dig->bypass_dig = false;
 		return;
 	}
 
+	rtw89_phy_dig_update_rssi_info(rtwdev);
+
 	if (!dig->is_linked_pre && is_linked) {
 		rtw89_debug(rtwdev, RTW89_DBG_DIG, "First connected\n");
 		rtw89_phy_dig_update_para(rtwdev);
+		dig->igi_fa_rssi = dig->igi_rssi;
 	} else if (dig->is_linked_pre && !is_linked) {
 		rtw89_debug(rtwdev, RTW89_DBG_DIG, "First disconnected\n");
 		rtw89_phy_dig_update_para(rtwdev);
+		dig->igi_fa_rssi = dig->igi_rssi;
 	}
 	dig->is_linked_pre = is_linked;
 
 	rtw89_phy_dig_igi_offset_by_env(rtwdev);
-	rtw89_phy_dig_update_rssi_info(rtwdev);
 
-	dig->dyn_igi_min = (dig->igi_rssi > IGI_RSSI_MIN) ?
-			    dig->igi_rssi - IGI_RSSI_MIN : 0;
-	dig->dyn_igi_max = dig->dyn_igi_min + IGI_OFFSET_MAX;
-	dig->igi_fa_rssi = dig->dyn_igi_min + dig->fa_rssi_ofst;
+	igi_min = max_t(int, dig->igi_rssi - IGI_RSSI_MIN, 0);
+	dig->dyn_igi_max = min(igi_min + IGI_OFFSET_MAX, igi_max_performance_mode);
+	dig->dyn_igi_min = max(igi_min, ABS_IGI_MIN);
 
-	dig->igi_fa_rssi = clamp(dig->igi_fa_rssi, dig->dyn_igi_min,
-				 dig->dyn_igi_max);
+	if (dig->dyn_igi_max >= dig->dyn_igi_min) {
+		dig->igi_fa_rssi += dig->fa_rssi_ofst;
+		dig->igi_fa_rssi = clamp(dig->igi_fa_rssi, dig->dyn_igi_min,
+					 dig->dyn_igi_max);
+	} else {
+		dig->igi_fa_rssi = dig->dyn_igi_max;
+	}
 
 	rtw89_debug(rtwdev, RTW89_DBG_DIG,
-		    "rssi=%03d, dyn(max,min)=(%d,%d), final_rssi=%d\n",
+		    "rssi=%03d, dyn_joint(max,min)=(%d,%d), final_rssi=%d\n",
 		    dig->igi_rssi, dig->dyn_igi_max, dig->dyn_igi_min,
 		    dig->igi_fa_rssi);