@@ -27,6 +27,7 @@ source "drivers/net/wireless/intersil/Kconfig"
source "drivers/net/wireless/marvell/Kconfig"
source "drivers/net/wireless/mediatek/Kconfig"
source "drivers/net/wireless/microchip/Kconfig"
+source "drivers/net/wireless/nxp/Kconfig"
source "drivers/net/wireless/purelifi/Kconfig"
source "drivers/net/wireless/ralink/Kconfig"
source "drivers/net/wireless/realtek/Kconfig"
@@ -12,6 +12,7 @@ obj-$(CONFIG_WLAN_VENDOR_INTERSIL) += intersil/
obj-$(CONFIG_WLAN_VENDOR_MARVELL) += marvell/
obj-$(CONFIG_WLAN_VENDOR_MEDIATEK) += mediatek/
obj-$(CONFIG_WLAN_VENDOR_MICROCHIP) += microchip/
+obj-$(CONFIG_WLAN_VENDOR_NXP) += nxp/
obj-$(CONFIG_WLAN_VENDOR_PURELIFI) += purelifi/
obj-$(CONFIG_WLAN_VENDOR_QUANTENNA) += quantenna/
obj-$(CONFIG_WLAN_VENDOR_RALINK) += ralink/
new file mode 100644
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config WLAN_VENDOR_NXP
+ bool "NXP devices"
+ default y
+ help
+ If you have a wireless card belonging to this class, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all the
+ questions about these cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if WLAN_VENDOR_NXP
+
+source "drivers/net/wireless/nxp/nxpwifi/Kconfig"
+
+endif # WLAN_VENDOR_NXP
new file mode 100644
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_NXPWIFI) += nxpwifi/
new file mode 100644
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NXPWIFI
+ tristate "NXP WiFi Driver"
+ depends on CFG80211
+ help
+ This adds support for wireless adapters based on NXP
+ 802.11n/ac chipsets.
+
+ If you choose to build it as a module, it will be called
+ nxpwifi.
+
+config NXPWIFI_SDIO
+ tristate "NXP WiFi Driver for IW61x"
+ depends on NXPWIFI && MMC
+ select FW_LOADER
+ select WANT_DEV_COREDUMP
+ help
+ This adds support for wireless adapters based on NXP
+ IW61x interface.
+
+ If you choose to build it as a module, it will be called
+ nxpwifi_sdio.
new file mode 100644
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright 2011-2020 NXP
+#
+
+
+nxpwifi-y += main.o
+nxpwifi-y += init.o
+nxpwifi-y += cfp.o
+nxpwifi-y += cmdevt.o
+nxpwifi-y += util.o
+nxpwifi-y += txrx.o
+nxpwifi-y += wmm.o
+nxpwifi-y += 11n.o
+nxpwifi-y += 11ac.o
+nxpwifi-y += 11ax.o
+nxpwifi-y += 11n_aggr.o
+nxpwifi-y += 11n_rxreorder.o
+nxpwifi-y += scan.o
+nxpwifi-y += join.o
+nxpwifi-y += sta_cfg.o
+nxpwifi-y += sta_cmd.o
+nxpwifi-y += uap_cmd.o
+nxpwifi-y += ie.o
+nxpwifi-y += sta_event.o
+nxpwifi-y += uap_event.o
+nxpwifi-y += sta_tx.o
+nxpwifi-y += sta_rx.o
+nxpwifi-y += uap_txrx.o
+nxpwifi-y += cfg80211.o
+nxpwifi-y += ethtool.o
+nxpwifi-y += 11h.o
+nxpwifi-$(CONFIG_DEBUG_FS) += debugfs.o
+obj-$(CONFIG_NXPWIFI) += nxpwifi.o
+
+nxpwifi_sdio-y += sdio.o
+obj-$(CONFIG_NXPWIFI_SDIO) += nxpwifi_sdio.o
+
+ccflags-y += -D__CHECK_ENDIAN
Let nxpwifi can be configured and compiled under kernel source tree. Signed-off-by: David Lin <yu-hao.lin@nxp.com> --- drivers/net/wireless/Kconfig | 1 + drivers/net/wireless/Makefile | 1 + drivers/net/wireless/nxp/Kconfig | 17 ++++++++++ drivers/net/wireless/nxp/Makefile | 3 ++ drivers/net/wireless/nxp/nxpwifi/Kconfig | 22 +++++++++++++ drivers/net/wireless/nxp/nxpwifi/Makefile | 39 +++++++++++++++++++++++ 6 files changed, 83 insertions(+) create mode 100644 drivers/net/wireless/nxp/Kconfig create mode 100644 drivers/net/wireless/nxp/Makefile create mode 100644 drivers/net/wireless/nxp/nxpwifi/Kconfig create mode 100644 drivers/net/wireless/nxp/nxpwifi/Makefile