@@ -5048,6 +5048,45 @@ static const struct ieee80211_sband_iftype_data sband_capa_6ghz[] = {
.tx_mcs_80p80 = cpu_to_le16(0xfffa),
},
},
+ .eht_cap = {
+ .has_eht = true,
+ .eht_cap_elem = {
+ .mac_cap_info[0] = IEEE80211_EHT_MAC_CAP0_OM_CONTROL |
+ IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE1,
+ .phy_cap_info[0] = IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ,
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ /* For all MCS and bandwidth, set 8 NSS for both Tx and
+ * Rx
+ */
+ .eht_mcs_nss_supp = {
+ /* As B1 and B2 are set in the supported
+ * channel width set field in the HE PHY
+ * capabilities information field and 320MHz in
+ * 6GHz is supported include all the following
+ * MCS/NSS.
+ */
+ .bw._80 = {
+ .rx_tx_mcs9_max_nss = 0x88,
+ .rx_tx_mcs11_max_nss = 0x88,
+ .rx_tx_mcs13_max_nss = 0x88,
+ },
+ .bw._160 = {
+ .rx_tx_mcs9_max_nss = 0x88,
+ .rx_tx_mcs11_max_nss = 0x88,
+ .rx_tx_mcs13_max_nss = 0x88,
+ },
+ .bw._320 = {
+ .rx_tx_mcs9_max_nss = 0x88,
+ .rx_tx_mcs11_max_nss = 0x88,
+ .rx_tx_mcs13_max_nss = 0x88,
+ },
+ },
+ /* PPE threshold information is not supported */
+ },
},
#endif
};
To facilitate testing of mesh EHT 320 MHz, add support for advertising this capability. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> --- drivers/net/wireless/virtual/mac80211_hwsim.c | 39 +++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)