@@ -176,7 +176,7 @@ struct ath12k_pdev_dp {
#define DP_RXDMA_ERR_DST_RING_SIZE 1024
#define DP_RXDMA_MON_STATUS_RING_SIZE 1024
#define DP_RXDMA_MONITOR_BUF_RING_SIZE 4096
-#define DP_RXDMA_MONITOR_DST_RING_SIZE 2048
+#define DP_RXDMA_MONITOR_DST_RING_SIZE 8092
#define DP_RXDMA_MONITOR_DESC_RING_SIZE 4096
#define DP_TX_MONITOR_BUF_RING_SIZE 4096
#define DP_TX_MONITOR_DEST_RING_SIZE 2048
@@ -434,8 +434,11 @@ enum htt_srng_ring_id {
HTT_HOST1_TO_FW_RXBUF_RING,
HTT_HOST2_TO_FW_RXBUF_RING,
HTT_RXDMA_NON_MONITOR_DEST_RING,
+ HTT_RXDMA_HOST_BUF_RING2,
HTT_TX_MON_HOST2MON_BUF_RING,
HTT_TX_MON_MON2HOST_DEST_RING,
+ HTT_RX_MON_HOST2MON_BUF_RING,
+ HTT_RX_MON_MON2HOST_DEST_RING,
};
/* host -> target HTT_SRING_SETUP message
@@ -814,7 +814,7 @@ ath12k_dp_tx_get_ring_id_type(struct ath12k_base *ab,
*htt_ring_type = HTT_HW_TO_SW_RING;
break;
case HAL_RXDMA_MONITOR_BUF:
- *htt_ring_id = HTT_RXDMA_MONITOR_BUF_RING;
+ *htt_ring_id = HTT_RX_MON_HOST2MON_BUF_RING;
*htt_ring_type = HTT_SW_TO_HW_RING;
break;
case HAL_RXDMA_MONITOR_STATUS:
@@ -822,7 +822,7 @@ ath12k_dp_tx_get_ring_id_type(struct ath12k_base *ab,
*htt_ring_type = HTT_SW_TO_HW_RING;
break;
case HAL_RXDMA_MONITOR_DST:
- *htt_ring_id = HTT_RXDMA_MONITOR_DEST_RING;
+ *htt_ring_id = HTT_RX_MON_MON2HOST_DEST_RING;
*htt_ring_type = HTT_HW_TO_SW_RING;
break;
case HAL_RXDMA_MONITOR_DESC:
@@ -1035,7 +1035,7 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
.hal_params = &ath12k_hw_hal_params_qcn9274,
- .rxdma1_enable = false,
+ .rxdma1_enable = true,
.num_rxdma_per_pdev = 1,
.num_rxdma_dst_ring = 0,
.rx_mac_buf_ring = false,
Add source buffer ring and destination buffer ring ID for monitor rings. These IDs are used for ring configuration during initial ring setup. Since monitor rings are enabled based on the rxdma1_enable flag, enable it in the hardware param for the QCN9274 version 2 hardware and increase the destination ring size to handle MSDU data buffers. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> --- drivers/net/wireless/ath/ath12k/dp.h | 5 ++++- drivers/net/wireless/ath/ath12k/dp_tx.c | 4 ++-- drivers/net/wireless/ath/ath12k/hw.c | 2 +- 3 files changed, 7 insertions(+), 4 deletions(-)