diff mbox series

[2/9] wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU

Message ID 20250114101026.3587702-2-shayne.chen@mediatek.com (mailing list archive)
State Accepted
Delegated to: Felix Fietkau
Headers show
Series [1/9] wifi: mt76: mt7996: add max mpdu len capability | expand

Commit Message

Shayne Chen Jan. 14, 2025, 10:10 a.m. UTC 
From: Howard Hsu <howard-yh.hsu@mediatek.com>

This commit includes two changes. First, enable "EHT MU PPDU With 4x
EHT-LTF And 0.8us GI" in EHT Phy capabilities element since hardware
can support. Second, fix the value of "Maximum number of supported
EHT LTFs" in the same element, where the previous setting of 3 in
Bit 3-4 was incorrect.

Fixes: 348533eb968d ("wifi: mt76: mt7996: add EHT capability init")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/init.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index 0946755dcf60..5ce0226a3900 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -1355,21 +1355,20 @@  mt7996_init_eht_caps(struct mt7996_phy *phy, enum nl80211_band band,
 		IEEE80211_EHT_PHY_CAP3_CODEBOOK_7_5_MU_FDBK;
 
 	eht_cap_elem->phy_cap_info[4] =
+		IEEE80211_EHT_PHY_CAP4_EHT_MU_PPDU_4_EHT_LTF_08_GI |
 		u8_encode_bits(min_t(int, sts - 1, 2),
 			       IEEE80211_EHT_PHY_CAP4_MAX_NC_MASK);
 
 	eht_cap_elem->phy_cap_info[5] =
 		u8_encode_bits(IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_16US,
 			       IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_MASK) |
-		u8_encode_bits(u8_get_bits(0x11, GENMASK(1, 0)),
+		u8_encode_bits(u8_get_bits(1, GENMASK(1, 0)),
 			       IEEE80211_EHT_PHY_CAP5_MAX_NUM_SUPP_EHT_LTF_MASK);
 
 	val = width == NL80211_CHAN_WIDTH_320 ? 0xf :
 	      width == NL80211_CHAN_WIDTH_160 ? 0x7 :
 	      width == NL80211_CHAN_WIDTH_80 ? 0x3 : 0x1;
 	eht_cap_elem->phy_cap_info[6] =
-		u8_encode_bits(u8_get_bits(0x11, GENMASK(4, 2)),
-			       IEEE80211_EHT_PHY_CAP6_MAX_NUM_SUPP_EHT_LTF_MASK) |
 		u8_encode_bits(val, IEEE80211_EHT_PHY_CAP6_MCS15_SUPP_MASK);
 
 	val = u8_encode_bits(nss, IEEE80211_EHT_MCS_NSS_RX) |