@@ -4852,6 +4852,22 @@ static struct ath12k_reg_rule
return reg_rule_ptr;
}
+static u8 ath12k_wmi_ignore_num_extra_rules(struct ath12k_wmi_reg_rule_ext_params *rule,
+ u32 num_reg_rules)
+{
+ u8 num_invalid_5ghz_rules = 0;
+ u32 count, start_freq;
+
+ for (count = 0; count < num_reg_rules; count++) {
+ start_freq = le32_get_bits(rule[count].freq_info, REG_RULE_START_FREQ);
+
+ if (start_freq >= ATH12K_MIN_6G_FREQ)
+ num_invalid_5ghz_rules++;
+ }
+
+ return num_invalid_5ghz_rules;
+}
+
static int ath12k_pull_reg_chan_list_ext_update_ev(struct ath12k_base *ab,
struct sk_buff *skb,
struct ath12k_reg_info *reg_info)
@@ -4862,6 +4878,7 @@ static int ath12k_pull_reg_chan_list_ext_update_ev(struct ath12k_base *ab,
u32 num_2g_reg_rules, num_5g_reg_rules;
u32 num_6g_reg_rules_ap[WMI_REG_CURRENT_MAX_AP_TYPE];
u32 num_6g_reg_rules_cl[WMI_REG_CURRENT_MAX_AP_TYPE][WMI_REG_MAX_CLIENT_TYPE];
+ u8 num_invalid_5ghz_ext_rules;
u32 total_reg_rules = 0;
int ret, i, j;
@@ -4955,20 +4972,6 @@ static int ath12k_pull_reg_chan_list_ext_update_ev(struct ath12k_base *ab,
memcpy(reg_info->alpha2, &ev->alpha2, REG_ALPHA2_LEN);
- /* FIXME: Currently FW includes 6G reg rule also in 5G rule
- * list for country US.
- * Having same 6G reg rule in 5G and 6G rules list causes
- * intersect check to be true, and same rules will be shown
- * multiple times in iw cmd. So added hack below to avoid
- * parsing 6G rule from 5G reg rule list, and this can be
- * removed later, after FW updates to remove 6G reg rule
- * from 5G rules list.
- */
- if (memcmp(reg_info->alpha2, "US", 2) == 0) {
- reg_info->num_5g_reg_rules = REG_US_5G_NUM_REG_RULES;
- num_5g_reg_rules = reg_info->num_5g_reg_rules;
- }
-
reg_info->dfs_region = le32_to_cpu(ev->dfs_region);
reg_info->phybitmap = le32_to_cpu(ev->phybitmap);
reg_info->num_phy = le32_to_cpu(ev->num_phy);
@@ -5071,8 +5074,29 @@ static int ath12k_pull_reg_chan_list_ext_update_ev(struct ath12k_base *ab,
}
}
+ ext_wmi_reg_rule += num_2g_reg_rules;
+
+ /* Firmware might include 6 GHz reg rule in 5 GHz rule list
+ * for few countries along with separate 6 GHz rule.
+ * Having same 6 GHz reg rule in 5 GHz and 6 GHz rules list
+ * causes intersect check to be true, and same rules will be
+ * shown multiple times in iw cmd.
+ * Hence, avoid parsing 6 GHz rule from 5 GHz reg rule list
+ */
+ num_invalid_5ghz_ext_rules = ath12k_wmi_ignore_num_extra_rules(ext_wmi_reg_rule,
+ num_5g_reg_rules);
+
+ if (num_invalid_5ghz_ext_rules) {
+ ath12k_dbg(ab, ATH12K_DBG_WMI,
+ "CC: %s 5 GHz reg rules number %d from fw, %d number of invalid 5 GHz rules",
+ reg_info->alpha2, reg_info->num_5g_reg_rules,
+ num_invalid_5ghz_ext_rules);
+
+ num_5g_reg_rules = num_5g_reg_rules - num_invalid_5ghz_ext_rules;
+ reg_info->num_5g_reg_rules = num_5g_reg_rules;
+ }
+
if (num_5g_reg_rules) {
- ext_wmi_reg_rule += num_2g_reg_rules;
reg_info->reg_rules_5g_ptr =
create_ext_reg_rules_from_wmi(num_5g_reg_rules,
ext_wmi_reg_rule);
@@ -5084,7 +5108,12 @@ static int ath12k_pull_reg_chan_list_ext_update_ev(struct ath12k_base *ab,
}
}
- ext_wmi_reg_rule += num_5g_reg_rules;
+ /* We have adjusted the number of 5 GHz reg rules above. But still those
+ * many rules needs to be adjusted in ext_wmi_reg_rule.
+ *
+ * NOTE: num_invalid_5ghz_ext_rules will be 0 for rest other cases.
+ */
+ ext_wmi_reg_rule += (num_5g_reg_rules + num_invalid_5ghz_ext_rules);
for (i = 0; i < WMI_REG_CURRENT_MAX_AP_TYPE; i++) {
reg_info->reg_rules_6g_ap_ptr[i] =
@@ -4093,7 +4093,6 @@ struct ath12k_wmi_eht_rate_set_params {
#define MAX_REG_RULES 10
#define REG_ALPHA2_LEN 2
#define MAX_6G_REG_RULES 5
-#define REG_US_5G_NUM_REG_RULES 4
enum wmi_start_event_param {
WMI_VDEV_START_RESP_EVENT = 0,
In the US country code, to avoid including 6 GHz rules in the 5 GHz rules list, the number of 5 GHz rules is set to a default constant value of 4 (REG_US_5G_NUM_REG_RULES). However, if there are more than 4 valid 5 GHz rules, the current logic will bypass the legitimate 6 GHz rules. For example, if there are 5 valid 5 GHz rules and 1 valid 6 GHz rule, the current logic will only consider 4 of the 5 GHz rules, treating the last valid rule as a 6 GHz rule. Consequently, the actual 6 GHz rule is never processed, leading to the eventual disabling of 6 GHz channels. To fix this issue, instead of hardcoding the value to 4, use a helper function to determine the number of 6 GHz rules present in the 5 GHz rules list and ignore only those rules. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Cc: stable@vger.kernel.org Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> --- drivers/net/wireless/ath/ath12k/wmi.c | 61 ++++++++++++++++++++++++++--------- drivers/net/wireless/ath/ath12k/wmi.h | 1 - 2 files changed, 45 insertions(+), 17 deletions(-) --- base-commit: c4e4e37afc8b8d178b0f00f607c30b3b81253597 change-id: 20250123-fix_6ghz_rules_handling-ff85f1efb30b