@@ -5,10 +5,12 @@
*/
#include <linux/dma-mapping.h>
+#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/remoteproc.h>
+#include <linux/soc/qcom/mdt_loader.h>
#include <linux/soc/qcom/smem_state.h>
#include "ahb.h"
#include "debug.h"
@@ -336,6 +338,131 @@ static void ath12k_ahb_stop(struct ath12k_base *ab)
ath12k_ce_cleanup_pipes(ab);
}
+static int ath12k_ahb_power_up(struct ath12k_base *ab)
+{
+ struct ath12k_ahb *ab_ahb = ath12k_ab_to_ahb(ab);
+ char fw_name[ATH12K_USERPD_FW_NAME_LEN];
+ char fw2_name[ATH12K_USERPD_FW_NAME_LEN];
+ struct device *dev = ab->dev;
+ const struct firmware *fw, *fw2;
+ struct reserved_mem *rmem = NULL;
+ unsigned long time_left;
+ phys_addr_t mem_phys;
+ void *mem_region;
+ size_t mem_size;
+ u32 pasid;
+ int ret;
+
+ rmem = ath12k_core_get_reserved_mem(ab, 0);
+ if (!rmem)
+ return -ENODEV;
+
+ mem_phys = rmem->base;
+ mem_size = rmem->size;
+ mem_region = devm_memremap(dev, mem_phys, mem_size, MEMREMAP_WC);
+ if (!mem_region) {
+ ath12k_err(ab, "unable to map memory region: %pa+%pa\n",
+ &rmem->base, &rmem->size);
+ return -ENOMEM;
+ }
+
+ snprintf(fw_name, sizeof(fw_name), "%s/%s/%s%d%s", ATH12K_FW_DIR,
+ ab->hw_params->fw.dir, ATH12K_AHB_FW_PREFIX, ab_ahb->userpd_id,
+ ATH12K_AHB_FW_SUFFIX);
+
+ ret = request_firmware(&fw, fw_name, dev);
+ if (ret < 0) {
+ ath12k_err(ab, "request_firmware failed\n");
+ return ret;
+ }
+
+ ath12k_dbg(ab, ATH12K_DBG_AHB, "Booting fw image %s, size %zd\n", fw_name,
+ fw->size);
+
+ if (!fw->size) {
+ ath12k_err(ab, "Invalid firmware size\n");
+ ret = -EINVAL;
+ goto err_fw;
+ }
+
+ pasid = (u32_encode_bits(ab_ahb->userpd_id, ATH12K_USERPD_ID_MASK)) |
+ ATH12K_AHB_UPD_SWID;
+
+ /* Load FW image to a reserved memory location */
+ ret = qcom_mdt_load(dev, fw, fw_name, pasid, mem_region, mem_phys, mem_size,
+ &mem_phys);
+ if (ret) {
+ ath12k_err(ab, "Failed to load MDT segments: %d\n", ret);
+ goto err_fw;
+ }
+
+ snprintf(fw2_name, sizeof(fw2_name), "%s/%s/%s", ATH12K_FW_DIR,
+ ab->hw_params->fw.dir, ATH12K_AHB_FW2);
+
+ ret = request_firmware(&fw2, fw2_name, dev);
+ if (ret < 0) {
+ ath12k_err(ab, "request_firmware failed\n");
+ goto err_fw;
+ }
+
+ ath12k_dbg(ab, ATH12K_DBG_AHB, "Booting fw image %s, size %zd\n", fw2_name,
+ fw2->size);
+
+ if (!fw2->size) {
+ ath12k_err(ab, "Invalid firmware size\n");
+ ret = -EINVAL;
+ goto err_fw2;
+ }
+
+ ret = qcom_mdt_load_no_init(dev, fw2, fw2_name, pasid, mem_region, mem_phys,
+ mem_size, &mem_phys);
+ if (ret) {
+ ath12k_err(ab, "Failed to load MDT segments: %d\n", ret);
+ goto err_fw2;
+ }
+
+ /* Authenticate FW image using peripheral ID */
+ ret = qcom_scm_pas_auth_and_reset(pasid);
+ if (ret) {
+ ath12k_err(ab, "failed to boot the remote processor %d\n", ret);
+ goto err_fw2;
+ }
+
+ /* Instruct Q6 to spawn userPD thread */
+ ret = qcom_smem_state_update_bits(ab_ahb->spawn_state, BIT(ab_ahb->spawn_bit),
+ BIT(ab_ahb->spawn_bit));
+ if (ret) {
+ ath12k_err(ab, "Failed to update spawn state %d\n", ret);
+ goto err_fw2;
+ }
+
+ time_left = wait_for_completion_timeout(&ab_ahb->userpd_spawned,
+ ATH12K_USERPD_SPAWN_TIMEOUT);
+ if (!time_left) {
+ ath12k_err(ab, "UserPD spawn wait timed out\n");
+ ret = -ETIMEDOUT;
+ goto err_fw2;
+ }
+
+ time_left = wait_for_completion_timeout(&ab_ahb->userpd_ready,
+ ATH12K_USERPD_READY_TIMEOUT);
+ if (!time_left) {
+ ath12k_err(ab, "UserPD ready wait timed out\n");
+ ret = -ETIMEDOUT;
+ goto err_fw2;
+ }
+
+ qcom_smem_state_update_bits(ab_ahb->spawn_state, BIT(ab_ahb->spawn_bit), 0);
+
+ ath12k_dbg(ab, ATH12K_DBG_AHB, "UserPD%d is now UP\n", ab_ahb->userpd_id);
+
+err_fw2:
+ release_firmware(fw2);
+err_fw:
+ release_firmware(fw);
+ return ret;
+}
+
static void ath12k_ahb_init_qmi_ce_config(struct ath12k_base *ab)
{
struct ath12k_qmi_ce_cfg *cfg = &ab->qmi.ce_cfg;
@@ -551,6 +678,7 @@ static const struct ath12k_hif_ops ath12k_ahb_hif_ops_ipq5332 = {
.irq_enable = ath12k_ahb_ext_irq_enable,
.irq_disable = ath12k_ahb_ext_irq_disable,
.map_service_to_pipe = ath12k_ahb_map_service_to_pipe,
+ .power_up = ath12k_ahb_power_up,
};
static irqreturn_t ath12k_userpd_irq_handler(int irq, void *data)
@@ -19,6 +19,15 @@
#define ATH12K_PCI_IRQ_CE0_OFFSET 3
#define ATH12K_ROOTPD_READY_TIMEOUT (5 * HZ)
#define ATH12K_RPROC_AFTER_POWERUP QCOM_SSR_AFTER_POWERUP
+#define ATH12K_AHB_FW_PREFIX "q6_fw"
+#define ATH12K_AHB_FW_SUFFIX ".mdt"
+#define ATH12K_AHB_FW2 "iu_fw.mdt"
+#define ATH12K_AHB_UPD_SWID 0x12
+#define ATH12K_USERPD_SPAWN_TIMEOUT (5 * HZ)
+#define ATH12K_USERPD_READY_TIMEOUT (10 * HZ)
+#define ATH12K_USERPD_STOP_TIMEOUT (5 * HZ)
+#define ATH12K_USERPD_ID_MASK GENMASK(9, 8)
+#define ATH12K_USERPD_FW_NAME_LEN 35
enum ath12k_ahb_smp2p_msg_id {
ATH12K_AHB_POWER_SAVE_ENTER = 1,