diff mbox series

[ath-next,3/3] wifi: ath12k: Update frequency range if reg rules changes

Message ID 20250408042128.720263-4-quic_rajson@quicinc.com (mailing list archive)
State New
Delegated to: Jeff Johnson
Headers show
Series wifi: ath12k: Properly update frequency range | expand

Checks

Context Check Description
wifibot/fixes_present success Fixes tag not required for -next series
wifibot/series_format success Posting correctly formatted
wifibot/tree_selection success Clearly marked for ath-next
wifibot/ynl success Generated files up to date; no warnings/errors; no diff in generated;
wifibot/build_32bit success Errors and warnings before: 0 this patch: 0
wifibot/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
wifibot/build_clang success Errors and warnings before: 0 this patch: 0
wifibot/build_clang_rust success No Rust files in patch. Skipping build
wifibot/build_tools success No tools touched, skip
wifibot/check_selftest success No net selftest shell script
wifibot/checkpatch warning WARNING: line length of 83 exceeds 80 columns WARNING: line length of 84 exceeds 80 columns WARNING: line length of 85 exceeds 80 columns
wifibot/deprecated_api success None detected
wifibot/header_inline success No static functions without inline keyword in header files
wifibot/kdoc success Errors and warnings before: 0 this patch: 0
wifibot/source_inline success Was 0 now: 0
wifibot/verify_fixes success No Fixes tag
wifibot/verify_signedoff success Signed-off-by tag matches author and committer

Commit Message

Rajat Soni April 8, 2025, 4:21 a.m. UTC 
From: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>

During the hardware register, driver updates the frequency range
during boot-up. However, if new regulatory rules are applied after
boot-up, the frequency range remains based on the older rules.
Since different countries have varying regulatory rules, the
frequency range can differ. Retaining the frequency range based on
outdated rules can be misleading.

Update the frequency range according to the new regulatory rules in
the function ath12k_regd_update().

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Co-developed-by: Rajat Soni <quic_rajson@quicinc.com>
Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/reg.c | 54 +++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/reg.c b/drivers/net/wireless/ath/ath12k/reg.c
index e1007b878f91..0fed4e0096cb 100644
--- a/drivers/net/wireless/ath/ath12k/reg.c
+++ b/drivers/net/wireless/ath/ath12k/reg.c
@@ -6,6 +6,7 @@ 
 #include <linux/rtnetlink.h>
 #include "core.h"
 #include "debug.h"
+#include "mac.h"
 
 /* World regdom to be used in case default regd from fw is unavailable */
 #define ATH12K_2GHZ_CH01_11      REG_RULE(2412 - 10, 2462 + 10, 40, 0, 20, 0)
@@ -246,6 +247,8 @@  static void ath12k_copy_regd(struct ieee80211_regdomain *regd_orig,
 
 int ath12k_regd_update(struct ath12k *ar, bool init)
 {
+	u32 phy_id, freq_low = 0, freq_high = 0, supported_bands, band;
+	struct ath12k_wmi_hal_reg_capabilities_ext_arg *reg_cap;
 	struct ath12k_hw *ah = ath12k_ar_to_ah(ar);
 	struct ieee80211_hw *hw = ah->hw;
 	struct ieee80211_regdomain *regd, *regd_copy = NULL;
@@ -255,6 +258,47 @@  int ath12k_regd_update(struct ath12k *ar, bool init)
 
 	ab = ar->ab;
 
+	supported_bands = ar->pdev->cap.supported_bands;
+	if (supported_bands & WMI_HOST_WLAN_2GHZ_CAP) {
+		band = NL80211_BAND_2GHZ;
+	} else if (supported_bands & WMI_HOST_WLAN_5GHZ_CAP && !ar->supports_6ghz) {
+		band = NL80211_BAND_5GHZ;
+	} else if (supported_bands & WMI_HOST_WLAN_5GHZ_CAP && ar->supports_6ghz) {
+		band = NL80211_BAND_6GHZ;
+	} else {
+		/* This condition is not expected.
+		 */
+		WARN_ON(1);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	reg_cap = &ab->hal_reg_cap[ar->pdev_idx];
+
+	if (ab->hw_params->single_pdev_only && !ar->supports_6ghz) {
+		phy_id = ar->pdev->cap.band[band].phy_id;
+		reg_cap = &ab->hal_reg_cap[phy_id];
+	}
+
+	/* Possible that due to reg change, current limits for supported
+	 * frequency changed. Update that
+	 */
+	if (supported_bands & WMI_HOST_WLAN_2GHZ_CAP) {
+		freq_low = max(reg_cap->low_2ghz_chan, ab->reg_freq_2ghz.start_freq);
+		freq_high = min(reg_cap->high_2ghz_chan, ab->reg_freq_2ghz.end_freq);
+	} else if (supported_bands & WMI_HOST_WLAN_5GHZ_CAP && !ar->supports_6ghz) {
+		freq_low = max(reg_cap->low_5ghz_chan, ab->reg_freq_5ghz.start_freq);
+		freq_high = min(reg_cap->high_5ghz_chan, ab->reg_freq_5ghz.end_freq);
+	} else if (supported_bands & WMI_HOST_WLAN_5GHZ_CAP && ar->supports_6ghz) {
+		freq_low = max(reg_cap->low_5ghz_chan, ab->reg_freq_6ghz.start_freq);
+		freq_high = min(reg_cap->high_5ghz_chan, ab->reg_freq_6ghz.end_freq);
+	}
+
+	ath12k_mac_update_freq_range(ar, freq_low, freq_high);
+
+	ath12k_dbg(ab, ATH12K_DBG_REG, "pdev %u reg updated freq limits %u->%u MHz\n",
+		   ar->pdev->pdev_id, freq_low, freq_high);
+
 	/* If one of the radios within ah has already updated the regd for
 	 * the wiphy, then avoid setting regd again
 	 */
@@ -704,6 +748,16 @@  ath12k_reg_build_regd(struct ath12k_base *ab,
 		   "\r\nCountry %s, CFG Regdomain %s FW Regdomain %d, num_reg_rules %d\n",
 		   alpha2, ath12k_reg_get_regdom_str(tmp_regd->dfs_region),
 		   reg_info->dfs_region, num_rules);
+
+	/* Reset start and end frequency for each band
+	 */
+	ab->reg_freq_5ghz.start_freq = INT_MAX;
+	ab->reg_freq_5ghz.end_freq = 0;
+	ab->reg_freq_2ghz.start_freq = INT_MAX;
+	ab->reg_freq_2ghz.end_freq = 0;
+	ab->reg_freq_6ghz.start_freq = INT_MAX;
+	ab->reg_freq_6ghz.end_freq = 0;
+
 	/* Update reg_rules[] below. Firmware is expected to
 	 * send these rules in order(2G rules first and then 5G)
 	 */