Message ID | 33184e0b78983fe7c79fa70c5fbb21042aafa4f5.1561804422.git.lorenzo@kernel.org (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Felix Fietkau |
Headers | show |
Series | add hw dfs pattern detector support to mt7615 driver | expand |
Lorenzo Bianconi <lorenzo@kernel.org> writes: > Unlock dfs channels since now mt7615 driver supports radar detection > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> > --- > drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c > index 5dc4cced5789..6d336d82cafe 100644 > --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c > @@ -152,6 +152,12 @@ static const struct ieee80211_iface_combination if_comb[] = { > .max_interfaces = 4, > .num_different_channels = 1, > .beacon_int_infra_match = true, > + .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | > + BIT(NL80211_CHAN_WIDTH_20) | > + BIT(NL80211_CHAN_WIDTH_40) | > + BIT(NL80211_CHAN_WIDTH_80) | > + BIT(NL80211_CHAN_WIDTH_160) | > + BIT(NL80211_CHAN_WIDTH_80P80), Isn't it questionable to enable these without any testing on real hardware? Getting DFS to work correctly is hard so I'm very suspicious about this.
> > Lorenzo Bianconi <lorenzo@kernel.org> writes: > > > Unlock dfs channels since now mt7615 driver supports radar detection > > > > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> > > --- > > drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c > > index 5dc4cced5789..6d336d82cafe 100644 > > --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c > > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c > > @@ -152,6 +152,12 @@ static const struct ieee80211_iface_combination if_comb[] = { > > .max_interfaces = 4, > > .num_different_channels = 1, > > .beacon_int_infra_match = true, > > + .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | > > + BIT(NL80211_CHAN_WIDTH_20) | > > + BIT(NL80211_CHAN_WIDTH_40) | > > + BIT(NL80211_CHAN_WIDTH_80) | > > + BIT(NL80211_CHAN_WIDTH_160) | > > + BIT(NL80211_CHAN_WIDTH_80P80), > > Isn't it questionable to enable these without any testing on real > hardware? Getting DFS to work correctly is hard so I'm very suspicious > about this. > > -- > Kalle Valo Hi Kalle, unfortunately at the moment I am not able to run any tests with a real signal generator so I just ported the code from vendor sdk. I am pretty confident it works since the radar pattern detection is done in fw/hw so I guess it has been already tested in the vendor sdk but we can postpone this patch and apply just the rest of the series until we have some test results. @Ryder: do you have the possibility to carry out some real tests? Regards, Lorenzo
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> writes: >> >> Lorenzo Bianconi <lorenzo@kernel.org> writes: >> >> > Unlock dfs channels since now mt7615 driver supports radar detection >> > >> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> >> > --- >> > drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++ >> > 1 file changed, 6 insertions(+) >> > >> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c >> > index 5dc4cced5789..6d336d82cafe 100644 >> > --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c >> > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c >> > @@ -152,6 +152,12 @@ static const struct ieee80211_iface_combination if_comb[] = { >> > .max_interfaces = 4, >> > .num_different_channels = 1, >> > .beacon_int_infra_match = true, >> > + .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | >> > + BIT(NL80211_CHAN_WIDTH_20) | >> > + BIT(NL80211_CHAN_WIDTH_40) | >> > + BIT(NL80211_CHAN_WIDTH_80) | >> > + BIT(NL80211_CHAN_WIDTH_160) | >> > + BIT(NL80211_CHAN_WIDTH_80P80), >> >> Isn't it questionable to enable these without any testing on real >> hardware? Getting DFS to work correctly is hard so I'm very suspicious >> about this. >> >> -- >> Kalle Valo > > Hi Kalle, > > unfortunately at the moment I am not able to run any tests with a real > signal generator so I just ported the code from vendor sdk. > I am pretty confident it works since the radar pattern detection is > done in fw/hw so I guess it has been already tested in the vendor sdk DFS is really tricky to get it working right, so I'm not easily convinced :) > but we can postpone this patch and apply just the rest of the series > until we have some test results. Yeah, I think it would be best to drop this patch so that DFS is not enabled by default and apply this patch only after positive test results.
On Mon, 2019-07-01 at 10:59 +0300, Kalle Valo wrote: > Lorenzo Bianconi <lorenzo.bianconi@redhat.com> writes: > > >> > >> Lorenzo Bianconi <lorenzo@kernel.org> writes: > >> > >> > Unlock dfs channels since now mt7615 driver supports radar detection > >> > > >> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> > >> > --- > >> > drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++ > >> > 1 file changed, 6 insertions(+) > >> > > >> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c > >> > index 5dc4cced5789..6d336d82cafe 100644 > >> > --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c > >> > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c > >> > @@ -152,6 +152,12 @@ static const struct ieee80211_iface_combination if_comb[] = { > >> > .max_interfaces = 4, > >> > .num_different_channels = 1, > >> > .beacon_int_infra_match = true, > >> > + .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | > >> > + BIT(NL80211_CHAN_WIDTH_20) | > >> > + BIT(NL80211_CHAN_WIDTH_40) | > >> > + BIT(NL80211_CHAN_WIDTH_80) | > >> > + BIT(NL80211_CHAN_WIDTH_160) | > >> > + BIT(NL80211_CHAN_WIDTH_80P80), > >> > >> Isn't it questionable to enable these without any testing on real > >> hardware? Getting DFS to work correctly is hard so I'm very suspicious > >> about this. > >> > >> -- > >> Kalle Valo > > > > Hi Kalle, > > > > unfortunately at the moment I am not able to run any tests with a real > > signal generator so I just ported the code from vendor sdk. > > I am pretty confident it works since the radar pattern detection is > > done in fw/hw so I guess it has been already tested in the vendor sdk > > DFS is really tricky to get it working right, so I'm not easily > convinced :) > > > but we can postpone this patch and apply just the rest of the series > > until we have some test results. > > Yeah, I think it would be best to drop this patch so that DFS is not > enabled by default and apply this patch only after positive test > results. > That's why I suggested Lorenzo to add this one - "[6/6] mt76: mt7615: add radar pattern test knob to debugfs" We can feed radar pattern through debugfs to test if a pattern is detected as radar pattern or not and verify the fw radar detection algorithm. In this format: RadarPulsePattern="3680128-2-245;3683878-2-245;3687628-2-245;3691378-2-245;3695128-2-245;3698878-2-245;3702628-2-245;3706378-2-245;3710128-2-245;3713878-2-245" As for testing it on 'real hardware' I need to take some other time to borrow equipment. Ryder
Ryder Lee <ryder.lee@mediatek.com> writes: > On Mon, 2019-07-01 at 10:59 +0300, Kalle Valo wrote: >> Lorenzo Bianconi <lorenzo.bianconi@redhat.com> writes: >> >> >> >> >> Lorenzo Bianconi <lorenzo@kernel.org> writes: >> >> >> >> > Unlock dfs channels since now mt7615 driver supports radar detection >> >> > >> >> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> >> >> > --- >> >> > drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++ >> >> > 1 file changed, 6 insertions(+) >> >> > >> >> > diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c >> >> > index 5dc4cced5789..6d336d82cafe 100644 >> >> > --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c >> >> > +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c >> >> > @@ -152,6 +152,12 @@ static const struct ieee80211_iface_combination if_comb[] = { >> >> > .max_interfaces = 4, >> >> > .num_different_channels = 1, >> >> > .beacon_int_infra_match = true, >> >> > + .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | >> >> > + BIT(NL80211_CHAN_WIDTH_20) | >> >> > + BIT(NL80211_CHAN_WIDTH_40) | >> >> > + BIT(NL80211_CHAN_WIDTH_80) | >> >> > + BIT(NL80211_CHAN_WIDTH_160) | >> >> > + BIT(NL80211_CHAN_WIDTH_80P80), >> >> >> >> Isn't it questionable to enable these without any testing on real >> >> hardware? Getting DFS to work correctly is hard so I'm very suspicious >> >> about this. >> >> >> >> -- >> >> Kalle Valo >> > >> > Hi Kalle, >> > >> > unfortunately at the moment I am not able to run any tests with a real >> > signal generator so I just ported the code from vendor sdk. >> > I am pretty confident it works since the radar pattern detection is >> > done in fw/hw so I guess it has been already tested in the vendor sdk >> >> DFS is really tricky to get it working right, so I'm not easily >> convinced :) >> >> > but we can postpone this patch and apply just the rest of the series >> > until we have some test results. >> >> Yeah, I think it would be best to drop this patch so that DFS is not >> enabled by default and apply this patch only after positive test >> results. >> > > That's why I suggested Lorenzo to add this one - "[6/6] mt76: mt7615: > add radar pattern test knob to debugfs" > > We can feed radar pattern through debugfs to test if a pattern is > detected as radar pattern or not and verify the fw radar detection > algorithm. Sure, that's nice for testing but does not guarantee that it works with real hardware as well. I take regulatory rules very seriously and that's why I'm extra careful here.
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c index 5dc4cced5789..6d336d82cafe 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c @@ -152,6 +152,12 @@ static const struct ieee80211_iface_combination if_comb[] = { .max_interfaces = 4, .num_different_channels = 1, .beacon_int_infra_match = true, + .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | + BIT(NL80211_CHAN_WIDTH_20) | + BIT(NL80211_CHAN_WIDTH_40) | + BIT(NL80211_CHAN_WIDTH_80) | + BIT(NL80211_CHAN_WIDTH_160) | + BIT(NL80211_CHAN_WIDTH_80P80), } };
Unlock dfs channels since now mt7615 driver supports radar detection Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> --- drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++ 1 file changed, 6 insertions(+)