From c8422f9ee8ee77b1d248f3b76d2c0d593fd43282 Mon Sep 17 00:00:00 2001
From: Tim Gardner <tim.gardner@canonical.com>
Date: Tue, 8 Jun 2010 11:33:02 -0600
Subject: [PATCH] hostap: Protect against initialization interrupt
Use an irq spinlock to hold off the IRQ handler until
enough early card init is complete such that the handler
can run without faulting.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Cc: stable@kernel.org
---
drivers/net/wireless/hostap/hostap_cs.c | 15 +++++++++++++--
drivers/net/wireless/hostap/hostap_hw.c | 10 +++++++---
drivers/net/wireless/hostap/hostap_wlan.h | 2 +-
3 files changed, 21 insertions(+), 6 deletions(-)
@@ -594,6 +594,7 @@ static int prism2_config(struct pcmcia_device *link)
local_info_t *local;
int ret = 1;
struct hostap_cs_priv *hw_priv;
+ unsigned long flags;
PDEBUG(DEBUG_FLOW, "prism2_config()\n");
@@ -625,9 +626,15 @@ static int prism2_config(struct pcmcia_device *link)
local->hw_priv = hw_priv;
hw_priv->link = link;
+ /*
+ * Make sure the IRQ handler cannot proceed until at least
+ * dev->base_addr is initialized.
+ */
+ spin_lock_irqsave(&local->irq_init_lock, flags);
+
ret = pcmcia_request_irq(link, prism2_interrupt);
if (ret)
- goto failed;
+ goto failed_unlock;
/*
* This actually configures the PCMCIA socket -- setting up
@@ -636,11 +643,13 @@ static int prism2_config(struct pcmcia_device *link)
*/
ret = pcmcia_request_configuration(link, &link->conf);
if (ret)
- goto failed;
+ goto failed_unlock;
dev->irq = link->irq;
dev->base_addr = link->io.BasePort1;
+ spin_unlock_irqrestore(&local->irq_init_lock, flags);
+
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: ",
dev_info, link->conf.ConfigIndex);
@@ -667,6 +676,8 @@ static int prism2_config(struct pcmcia_device *link)
return ret;
+ failed_unlock:
+ spin_unlock_irqrestore(&local->irq_init_lock, flags);
failed:
kfree(hw_priv);
prism2_release((u_long)link);
@@ -2618,17 +2618,20 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id)
int events = 0;
u16 ev;
+ iface = netdev_priv(dev);
+ local = iface->local;
+
/* Detect early interrupt before driver is fully configued */
+ spin_lock(&local->irq_init_lock);
if (!dev->base_addr) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: Interrupt, but dev not configured\n",
dev->name);
}
+ spin_unlock(&local->irq_init_lock);
return IRQ_HANDLED;
}
-
- iface = netdev_priv(dev);
- local = iface->local;
+ spin_unlock(&local->irq_init_lock);
prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INTERRUPT, 0, 0);
@@ -3147,6 +3150,7 @@ prism2_init_local_data(struct prism2_helper_functions *funcs, int card_idx,
spin_lock_init(&local->cmdlock);
spin_lock_init(&local->baplock);
spin_lock_init(&local->lock);
+ spin_lock_init(&local->irq_init_lock);
mutex_init(&local->rid_bap_mtx);
if (card_idx < 0 || card_idx >= MAX_PARM_DEVICES)
@@ -654,7 +654,7 @@ struct local_info {
rwlock_t iface_lock; /* hostap_interfaces read lock; use write lock
* when removing entries from the list.
* TX and RX paths can use read lock. */
- spinlock_t cmdlock, baplock, lock;
+ spinlock_t cmdlock, baplock, lock, irq_init_lock;
struct mutex rid_bap_mtx;
u16 infofid; /* MAC buffer id for info frame */
/* txfid, intransmitfid, next_txtid, and next_alloc are protected by
--
1.7.0.4