diff mbox series

[v2,13/16] mt76: mt7921: rely on mcu_get_nic_capability

Message ID 503679138470b7d02f1aee86fdaedcf9c0ed43dc.1631918993.git.objelf@gmail.com (mailing list archive)
State Superseded
Delegated to: Felix Fietkau
Headers show
Series Add MT7921 SDIO support | expand

Commit Message

Sean Wang Sept. 17, 2021, 11:59 p.m. UTC
From: Sean Wang <sean.wang@mediatek.com>

Rely on mcu_get_nic_capability to obtain Tx quota information
for the SDIO device, get PHY capability, MAC address and then we can
totally drop mt7921/eeprom.c and any unnecessary code.

Noting that mt76_connac_mcu_get_nic_capability should be run before set
flag MT76_STATE_MCU_RUNNING being set to setup the proper parameters
like Tx quota control before the device is started to running.

Tested-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
---
 .../wireless/mediatek/mt76/mt7615/sdio_mcu.c  |   1 +
 .../wireless/mediatek/mt76/mt7921/Makefile    |   2 +-
 .../wireless/mediatek/mt76/mt7921/eeprom.c    | 101 ------------------
 .../net/wireless/mediatek/mt76/mt7921/init.c  |  10 +-
 .../net/wireless/mediatek/mt76/mt7921/mcu.c   |   8 +-
 .../wireless/mediatek/mt76/mt7921/mt7921.h    |   8 --
 .../net/wireless/mediatek/mt76/sdio_txrx.c    |   3 +-
 7 files changed, 10 insertions(+), 123 deletions(-)
 delete mode 100644 drivers/net/wireless/mediatek/mt76/mt7921/eeprom.c
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c
index 095dd8d7f38f..7d81075f415a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c
@@ -27,6 +27,7 @@  static int mt7663s_mcu_init_sched(struct mt7615_dev *dev)
 						   MT_HIF1_MIN_QUOTA);
 	sdio->sched.ple_data_quota = mt76_get_field(dev, MT_PLE_PG_HIF0_GROUP,
 						    MT_HIF0_MIN_QUOTA);
+	sdio->sched.pse_page_size = MT_PSE_PAGE_SZ;
 	txdwcnt = mt76_get_field(dev, MT_PP_TXDWCNT,
 				 MT_PP_TXDWCNT_TX1_ADD_DW_CNT);
 	sdio->sched.deficit = txdwcnt << 2;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/Makefile b/drivers/net/wireless/mediatek/mt76/mt7921/Makefile
index 8cea896d5965..5f32c2c71134 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/Makefile
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/Makefile
@@ -5,6 +5,6 @@  obj-$(CONFIG_MT7921E) += mt7921e.o
 
 CFLAGS_trace.o := -I$(src)
 
-mt7921-common-y := mac.o mcu.o eeprom.o main.o init.o debugfs.o trace.o
+mt7921-common-y := mac.o mcu.o main.o init.o debugfs.o trace.o
 mt7921-common-$(CONFIG_NL80211_TESTMODE) += testmode.o
 mt7921e-y := pci.o pci_mac.o pci_mcu.o dma.o
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7921/eeprom.c
deleted file mode 100644
index 4d0a4aeac6bf..000000000000
--- a/drivers/net/wireless/mediatek/mt76/mt7921/eeprom.c
+++ /dev/null
@@ -1,101 +0,0 @@ 
-// SPDX-License-Identifier: ISC
-/* Copyright (C) 2020 MediaTek Inc. */
-
-#include "mt7921.h"
-#include "eeprom.h"
-
-static u32 mt7921_eeprom_read(struct mt7921_dev *dev, u32 offset)
-{
-	u8 *data = dev->mt76.eeprom.data;
-
-	if (data[offset] == 0xff)
-		mt7921_mcu_get_eeprom(dev, offset);
-
-	return data[offset];
-}
-
-static int mt7921_eeprom_load(struct mt7921_dev *dev)
-{
-	int ret;
-
-	ret = mt76_eeprom_init(&dev->mt76, MT7921_EEPROM_SIZE);
-	if (ret < 0)
-		return ret;
-
-	memset(dev->mt76.eeprom.data, -1, MT7921_EEPROM_SIZE);
-
-	return 0;
-}
-
-static int mt7921_check_eeprom(struct mt7921_dev *dev)
-{
-	u8 *eeprom = dev->mt76.eeprom.data;
-	u16 val;
-
-	mt7921_eeprom_read(dev, MT_EE_CHIP_ID);
-	val = get_unaligned_le16(eeprom);
-
-	switch (val) {
-	case 0x7922:
-	case 0x7961:
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-void mt7921_eeprom_parse_band_config(struct mt7921_phy *phy)
-{
-	struct mt7921_dev *dev = phy->dev;
-	u32 val;
-
-	val = mt7921_eeprom_read(dev, MT_EE_WIFI_CONF);
-	val = FIELD_GET(MT_EE_WIFI_CONF_BAND_SEL, val);
-
-	switch (val) {
-	case MT_EE_5GHZ:
-		phy->mt76->cap.has_5ghz = true;
-		break;
-	case MT_EE_2GHZ:
-		phy->mt76->cap.has_2ghz = true;
-		break;
-	default:
-		phy->mt76->cap.has_2ghz = true;
-		phy->mt76->cap.has_5ghz = true;
-		break;
-	}
-}
-
-static void mt7921_eeprom_parse_hw_cap(struct mt7921_dev *dev)
-{
-	u8 tx_mask;
-
-	mt7921_eeprom_parse_band_config(&dev->phy);
-
-	/* TODO: read NSS with MCU_CMD_NIC_CAPV2 */
-	tx_mask = 2;
-	dev->chainmask = BIT(tx_mask) - 1;
-	dev->mphy.antenna_mask = dev->chainmask;
-	dev->mphy.chainmask = dev->mphy.antenna_mask;
-}
-
-int mt7921_eeprom_init(struct mt7921_dev *dev)
-{
-	int ret;
-
-	ret = mt7921_eeprom_load(dev);
-	if (ret < 0)
-		return ret;
-
-	ret = mt7921_check_eeprom(dev);
-	if (ret)
-		return ret;
-
-	mt7921_eeprom_parse_hw_cap(dev);
-	memcpy(dev->mphy.macaddr, dev->mt76.eeprom.data + MT_EE_MAC_ADDR,
-	       ETH_ALEN);
-
-	mt76_eeprom_override(&dev->mphy);
-
-	return 0;
-}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
index d310d6e1e566..6a4b014e8afd 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
@@ -149,7 +149,6 @@  EXPORT_SYMBOL_GPL(mt7921_mac_init);
 
 static int __mt7921_init_hardware(struct mt7921_dev *dev)
 {
-	struct mt76_dev *mdev = &dev->mt76;
 	int ret;
 
 	/* force firmware operation mode into normal state,
@@ -160,9 +159,7 @@  static int __mt7921_init_hardware(struct mt7921_dev *dev)
 	if (ret)
 		goto out;
 
-	ret = mt7921_eeprom_init(dev);
-	if (ret)
-		goto out;
+	mt76_eeprom_override(&dev->mphy);
 
 	ret = mt7921_mcu_set_eeprom(dev);
 	if (ret)
@@ -170,11 +167,6 @@  static int __mt7921_init_hardware(struct mt7921_dev *dev)
 
 	ret = mt7921_mac_init(dev);
 out:
-	if (ret && mdev->eeprom.data) {
-		devm_kfree(mdev->dev, mdev->eeprom.data);
-		mdev->eeprom.data = NULL;
-	}
-
 	return ret;
 }
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
index 863781895652..10e1ee505716 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -909,10 +909,12 @@  int mt7921_run_firmware(struct mt7921_dev *dev)
 	if (err)
 		return err;
 
-	set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
-	mt7921_mcu_fw_log_2_host(dev, 1);
+	err = mt76_connac_mcu_get_nic_capability(&dev->mphy);
+	if (err)
+		return err;
 
-	return mt76_connac_mcu_get_nic_capability(&dev->mphy);
+	set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
+	return mt7921_mcu_fw_log_2_host(dev, 1);
 }
 EXPORT_SYMBOL_GPL(mt7921_run_firmware);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
index 295f57ce7eba..2082b4d2a23d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h
@@ -156,8 +156,6 @@  struct mt7921_dev {
 	struct mt7921_phy phy;
 	struct tasklet_struct irq_tasklet;
 
-	u16 chainmask;
-
 	struct work_struct reset_work;
 	bool hw_full_reset:1;
 	bool hw_init_done:1;
@@ -247,12 +245,6 @@  u32 mt7921_reg_map(struct mt7921_dev *dev, u32 addr);
 int __mt7921_start(struct mt7921_phy *phy);
 int mt7921_register_device(struct mt7921_dev *dev);
 void mt7921_unregister_device(struct mt7921_dev *dev);
-int mt7921_eeprom_init(struct mt7921_dev *dev);
-void mt7921_eeprom_parse_band_config(struct mt7921_phy *phy);
-int mt7921_eeprom_get_target_power(struct mt7921_dev *dev,
-				   struct ieee80211_channel *chan,
-				   u8 chain_idx);
-void mt7921_eeprom_init_sku(struct mt7921_dev *dev);
 int mt7921_dma_init(struct mt7921_dev *dev);
 int mt7921_wpdma_reset(struct mt7921_dev *dev, bool force);
 int mt7921_wpdma_reinit_cond(struct mt7921_dev *dev);
diff --git a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
index 73289a9845d7..8de84ec556a1 100644
--- a/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
+++ b/drivers/net/wireless/mediatek/mt76/sdio_txrx.c
@@ -210,7 +210,8 @@  mt76s_tx_pick_quota(struct mt76_sdio *sdio, bool mcu, int buf_sz,
 {
 	int pse_sz;
 
-	pse_sz = DIV_ROUND_UP(buf_sz + sdio->sched.deficit, MT_PSE_PAGE_SZ);
+	pse_sz = DIV_ROUND_UP(buf_sz + sdio->sched.deficit,
+			      sdio->sched.pse_page_size);
 
 	if (mcu && sdio->hw_ver == MT76_CONNAC2_SDIO)
 		pse_sz = 1;