@@ -2143,6 +2143,48 @@ void rt2800_config_erp(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_erp *erp,
}
EXPORT_SYMBOL_GPL(rt2800_config_erp);
+static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev,
+ const struct rt2x00_field32 mask)
+{
+ unsigned int i;
+ u32 reg;
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ reg = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
+ if (!rt2x00_get_field32(reg, mask))
+ return 0;
+
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n");
+ return -EACCES;
+}
+
+static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
+{
+ unsigned int i;
+ u8 value;
+
+ /*
+ * BBP was enabled after firmware was loaded,
+ * but we need to reactivate it now.
+ */
+ rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+ rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+ msleep(1);
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ value = rt2800_bbp_read(rt2x00dev, 0);
+ if ((value != 0xff) && (value != 0x00))
+ return 0;
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n");
+ return -EACCES;
+}
+
static void rt2800_config_3572bt_ant(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
@@ -3799,10 +3841,9 @@ static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev,
struct ieee80211_channel *chan,
int power_level) {
u16 eeprom, target_power, max_power;
- u32 mac_sys_ctrl, mac_status;
+ u32 mac_sys_ctrl;
u32 reg;
u8 bbp;
- int i;
/* hardware unit is 0.5dBm, limited to 23.5dBm */
power_level *= 2;
@@ -3838,16 +3879,8 @@ static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev,
/* Disable Tx/Rx */
rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
/* Check MAC Tx/Rx idle */
- for (i = 0; i < 10000; i++) {
- mac_status = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
- if (mac_status & 0x3)
- usleep_range(50, 200);
- else
- break;
- }
-
- if (i == 10000)
- rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n");
+ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY)))
+ rt2x00_warn(rt2x00dev, "RF busy while configuring ALC\n");
if (chan->center_freq > 2457) {
bbp = rt2800_bbp_read(rt2x00dev, 30);
@@ -6249,46 +6282,6 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
return 0;
}
-static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
-{
- unsigned int i;
- u32 reg;
-
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- reg = rt2800_register_read(rt2x00dev, MAC_STATUS_CFG);
- if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
- return 0;
-
- udelay(REGISTER_BUSY_DELAY);
- }
-
- rt2x00_err(rt2x00dev, "BBP/RF register access failed, aborting\n");
- return -EACCES;
-}
-
-static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
-{
- unsigned int i;
- u8 value;
-
- /*
- * BBP was enabled after firmware was loaded,
- * but we need to reactivate it now.
- */
- rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
- rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
- msleep(1);
-
- for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
- value = rt2800_bbp_read(rt2x00dev, 0);
- if ((value != 0xff) && (value != 0x00))
- return 0;
- udelay(REGISTER_BUSY_DELAY);
- }
-
- rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n");
- return -EACCES;
-}
static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev)
{
@@ -9110,7 +9103,7 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev)
/*
* Wait BBP/RF to wake up.
*/
- if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev)))
+ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev, MAC_STATUS_CFG_BBP_RF_BUSY)))
return -EIO;
/*
Move bbp_ready and rf_ready busy wait functions up in the code so they can more easily be used. Allow specifying register mask in rf_ready function which is useful for calibration routines which will be added in follow-up commits. Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- .../net/wireless/ralink/rt2x00/rt2800lib.c | 99 +++++++++---------- 1 file changed, 46 insertions(+), 53 deletions(-)