diff mbox

[v6] ath10k: set MAC timestamp in management Rx frame

Message ID 5c9a7c5d47974cf3e72cd114e140027e2a4bbdab.1456854314.git.poh@qca.qualcomm.com (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show

Commit Message

Peter Oh March 1, 2016, 5:52 p.m. UTC
Check and set Rx MAC timestamp when firmware indicates it.
Firmware adds it in Rx beacon frame only at this moment.
Driver and mac80211 may utilize it to detect such clockdrift
or beacon collision and use the result for beacon collision
avoidance.

Signed-off-by: Peter Oh <poh@qca.qualcomm.com>
---

v2:
 - fix kbuild test robot warning, left shift count >= width of type,
   at __le32_to_cpu(arg.ext_info.rx_mac_timestamp_u32) << 32
v3:
 - correct ext_info to start 4-byte aligned
 - make struct wmi_mgmt_rx_ext_info 4-byte aligned to comply FW's intention
v4:
 - fix endianness warnings, restricted __le32 degrades to integer
v5:
 - use ALIGN for better read
v6:
 - use __le64 instead of 2 __le32 variables to simplify substitution

 drivers/net/wireless/ath/ath10k/wmi.c | 13 +++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h |  7 +++++++
 2 files changed, 20 insertions(+)

Comments

Kalle Valo March 11, 2016, 12:13 p.m. UTC | #1
Peter Oh <poh@qca.qualcomm.com> writes:

> Check and set Rx MAC timestamp when firmware indicates it.
> Firmware adds it in Rx beacon frame only at this moment.
> Driver and mac80211 may utilize it to detect such clockdrift
> or beacon collision and use the result for beacon collision
> avoidance.
>
> Signed-off-by: Peter Oh <poh@qca.qualcomm.com>

Applied, thanks.
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 1ce6742..20d5e35 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2167,8 +2167,10 @@  static int ath10k_wmi_op_pull_mgmt_rx_ev(struct ath10k *ar, struct sk_buff *skb,
 	struct wmi_mgmt_rx_event_v1 *ev_v1;
 	struct wmi_mgmt_rx_event_v2 *ev_v2;
 	struct wmi_mgmt_rx_hdr_v1 *ev_hdr;
+	struct wmi_mgmt_rx_ext_info *ext_info;
 	size_t pull_len;
 	u32 msdu_len;
+	u32 len;
 
 	if (test_bit(ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX, ar->fw_features)) {
 		ev_v2 = (struct wmi_mgmt_rx_event_v2 *)skb->data;
@@ -2195,6 +2197,12 @@  static int ath10k_wmi_op_pull_mgmt_rx_ev(struct ath10k *ar, struct sk_buff *skb,
 	if (skb->len < msdu_len)
 		return -EPROTO;
 
+	if (le32_to_cpu(arg->status) & WMI_RX_STATUS_EXT_INFO) {
+		len = ALIGN(le32_to_cpu(arg->buf_len), 4);
+		ext_info = (struct wmi_mgmt_rx_ext_info *)(skb->data + len);
+		memcpy(&arg->ext_info, ext_info,
+		       sizeof(struct wmi_mgmt_rx_ext_info));
+	}
 	/* the WMI buffer might've ended up being padded to 4 bytes due to HTC
 	 * trailer with credit update. Trim the excess garbage.
 	 */
@@ -2281,6 +2289,11 @@  int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 	if (rx_status & WMI_RX_STATUS_ERR_MIC)
 		status->flag |= RX_FLAG_MMIC_ERROR;
 
+	if (rx_status & WMI_RX_STATUS_EXT_INFO) {
+		status->mactime =
+			__le64_to_cpu(arg.ext_info.rx_mac_timestamp);
+		status->flag |= RX_FLAG_MACTIME_END;
+	}
 	/* Hardware can Rx CCK rates on 5GHz. In that case phy_mode is set to
 	 * MODE_11B. This means phy_mode is not a reliable source for the band
 	 * of mgmt rx.
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 4d3cbc4..bb42f7a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3037,11 +3037,17 @@  struct wmi_10_4_mgmt_rx_event {
 	u8 buf[0];
 } __packed;
 
+struct wmi_mgmt_rx_ext_info {
+	__le64 rx_mac_timestamp;
+} __packed __aligned(4);
+
 #define WMI_RX_STATUS_OK			0x00
 #define WMI_RX_STATUS_ERR_CRC			0x01
 #define WMI_RX_STATUS_ERR_DECRYPT		0x08
 #define WMI_RX_STATUS_ERR_MIC			0x10
 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS	0x20
+/* Extension data at the end of mgmt frame */
+#define WMI_RX_STATUS_EXT_INFO		0x40
 
 #define PHY_ERROR_GEN_SPECTRAL_SCAN		0x26
 #define PHY_ERROR_GEN_FALSE_RADAR_EXT		0x24
@@ -6116,6 +6122,7 @@  struct wmi_mgmt_rx_ev_arg {
 	__le32 phy_mode;
 	__le32 buf_len;
 	__le32 status; /* %WMI_RX_STATUS_ */
+	struct wmi_mgmt_rx_ext_info ext_info;
 };
 
 struct wmi_ch_info_ev_arg {