| Message ID | 5e0b7433-6f4d-4e0e-8550-c28914419f6c@gmail.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Ping-Ke Shih |
| Headers | show |
| Series | wifi: rtlwifi: Add new rtl8192du driver | expand |
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c index d835a27429f0..56b5cd032a9a 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c @@ -892,8 +892,8 @@ static u8 _rtl92c_phy_get_rightchnlplace(u8 chnl) u8 place = chnl; if (chnl > 14) { - for (place = 14; place < ARRAY_SIZE(channel5g); place++) { - if (channel5g[place] == chnl) { + for (place = 14; place < ARRAY_SIZE(channel_all); place++) { + if (channel_all[place] == chnl) { place++; break; }
Different channels have different TX power settings. rtl8192de is using the TX power setting from the wrong channel in the 5 GHz band because _rtl92c_phy_get_rightchnlplace expects an array which includes 2.4 GHz and 5 GHz channel numbers, but it's using an array which includes only the 5 GHz channel numbers. Use the array channel_all (defined in rtl8192de/phy.c) instead of the incorrect channel5g (defined in core.c). Tested only with rtl8192du, which will use the same TX power code. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> --- No change from v1, which was originally sent separately: https://lore.kernel.org/linux-wireless/9995b805-ef8b-47c9-b176-ff540066039a@gmail.com/ --- drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)