| Message ID | BA065B146422EE5B+20241224085244.629015-1-wangyuli@uniontech.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Felix Fietkau |
| Headers | show |
| Series | wifi: mt76: mt76u_vendor_request: Do not print error messages when -EPROTO | expand |
diff --git a/drivers/net/wireless/mediatek/mt76/usb.c b/drivers/net/wireless/mediatek/mt76/usb.c index 58ff06823389..f9e67b8c3b3c 100644 --- a/drivers/net/wireless/mediatek/mt76/usb.c +++ b/drivers/net/wireless/mediatek/mt76/usb.c @@ -33,9 +33,9 @@ int __mt76u_vendor_request(struct mt76_dev *dev, u8 req, u8 req_type, ret = usb_control_msg(udev, pipe, req, req_type, val, offset, buf, len, MT_VEND_REQ_TOUT_MS); - if (ret == -ENODEV) + if (ret == -ENODEV || ret == -EPROTO) set_bit(MT76_REMOVED, &dev->phy.state); - if (ret >= 0 || ret == -ENODEV) + if (ret >= 0 || ret == -ENODEV || ret == -EPROTO) return ret; usleep_range(5000, 10000); }
When initializing the network card, unplugging the device will trigger an -EPROTO error, resulting in a flood of error messages being printed frantically. The exception is printed as follows： mt76x2u 2-2.4:1.0: vendor request req:47 off:9018 failed:-71 mt76x2u 2-2.4:1.0: vendor request req:47 off:9018 failed:-71 ... It will continue to print more than 2000 times for about 5 minutes, causing the usb device to be unable to be disconnected. During this period, the usb port cannot recognize the new device because the old device has not disconnected. There may be other operating methods that cause -EPROTO, but -EPROTO is a low-level hardware error. It is unwise to repeat vendor requests expecting to read correct data. It is a better choice to treat -EPROTO and -ENODEV the same way。 Similar to commit 9b0f100c1970 ("mt76: usb: process URBs with status EPROTO properly") do no schedule rx_worker for urb marked with status set -EPROTO. I also reproduced this situation when plugging and unplugging the device, and this patch is effective. Just do not vendor request again for urb marked with status set -EPROTO. Link: https://lore.kernel.org/all/531681bd-30f5-4a70-a156-bf8754b8e072@intel.com/ Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Co-developed-by: Xu Rao <raoxu@uniontech.com> Signed-off-by: Xu Rao <raoxu@uniontech.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> --- drivers/net/wireless/mediatek/mt76/usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)