diff mbox series

[02/15] rt2x00: add throughput LED trigger

Message ID YyUBBqmK0gzmM1mP@makrotopia.org (mailing list archive)
State Superseded
Delegated to: Kalle Valo
Headers show
Series [RESEND,01/15] rt2x00: define RF5592 in init_eeprom routine | expand

Commit Message

Daniel Golle Sept. 16, 2022, 11:04 p.m. UTC 
From: David Bauer <mail@david-bauer.net>

This adds a (currently missing) throughput LED trigger for the rt2x00
driver. Previously, LED triggers had to be assigned to the netdev, which
was limited to a single VAP.

Tested-by: Christoph Krapp <achterin@googlemail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
---
 drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Comments

Stanislaw Gruszka Sept. 17, 2022, 12:30 p.m. UTC | #1 
On Sat, Sep 17, 2022 at 12:04:38AM +0100, Daniel Golle wrote:
> From: David Bauer <mail@david-bauer.net>
> 
> This adds a (currently missing) throughput LED trigger for the rt2x00
> driver. Previously, LED triggers had to be assigned to the netdev, which
> was limited to a single VAP.
> 
> Tested-by: Christoph Krapp <achterin@googlemail.com>
> Signed-off-by: David Bauer <mail@david-bauer.net>

Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
diff mbox series

Patch

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index e95c101c271113..3a035afcf7f99c 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -1093,6 +1093,19 @@  static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
 	kfree(rt2x00dev->spec.channels_info);
 }
 
+static const struct ieee80211_tpt_blink rt2x00_tpt_blink[] = {
+	{ .throughput = 0 * 1024, .blink_time = 334 },
+	{ .throughput = 1 * 1024, .blink_time = 260 },
+	{ .throughput = 2 * 1024, .blink_time = 220 },
+	{ .throughput = 5 * 1024, .blink_time = 190 },
+	{ .throughput = 10 * 1024, .blink_time = 170 },
+	{ .throughput = 25 * 1024, .blink_time = 150 },
+	{ .throughput = 54 * 1024, .blink_time = 130 },
+	{ .throughput = 120 * 1024, .blink_time = 110 },
+	{ .throughput = 265 * 1024, .blink_time = 80 },
+	{ .throughput = 586 * 1024, .blink_time = 50 },
+};
+
 static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
@@ -1174,6 +1187,11 @@  static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 
 #undef RT2X00_TASKLET_INIT
 
+	ieee80211_create_tpt_led_trigger(rt2x00dev->hw,
+					 IEEE80211_TPT_LEDTRIG_FL_RADIO,
+					 rt2x00_tpt_blink,
+					 ARRAY_SIZE(rt2x00_tpt_blink));
+
 	/*
 	 * Register HW.
 	 */